Re: Wheel lock
Guest
Posts: n/a
Re: Wheel lock
On 9 Sep 2003 06:58:55 -0700, the following appeared in
rec.autos.makers.jeep+******, posted by
snowboardripper@hotmail.com (Snowboardripper):
I posted this in response to another question about wheel
locks. Sounds like we used the same tire dealer... ;-)
"If you do, make damn sure no tire-change moron with an
impact wrench gets at them. After *shearing* two keys on my
McGard locks, it took a spare set of keys JB Welded to the
locks and a 450 lb ft impact wrench to get them off. They
did *not* go back on..."
SInce I don't need this hassle again, and since the chance
of someone ripping off my stock wheels is slim-to-zero, and
since even *if* that happened the insurance would cover it,
I don't use the damn things any more. YMMV.
>I have wheel locks installed on my TJ stock rims. I rotated my tires
>this week only to discover that the dealer who did the previous
>rotation over torqued all the wheel lug nuts. Some of them required a
>huge breaker bar to get off.
>When I went to take off the wheel lock I broke the inside keying.
>I sent away for a new key but is there a way to get them off or break
>them if I get a flat. My spare still has the lock on and 3 of the
>other wheels. I will be offroading over the weekend and could break a
>bead which will require me to change the tire.
>So I need to know how to break the lock off. What tools do I need?
--
Bob C.
Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)
"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov
rec.autos.makers.jeep+******, posted by
snowboardripper@hotmail.com (Snowboardripper):
I posted this in response to another question about wheel
locks. Sounds like we used the same tire dealer... ;-)
"If you do, make damn sure no tire-change moron with an
impact wrench gets at them. After *shearing* two keys on my
McGard locks, it took a spare set of keys JB Welded to the
locks and a 450 lb ft impact wrench to get them off. They
did *not* go back on..."
SInce I don't need this hassle again, and since the chance
of someone ripping off my stock wheels is slim-to-zero, and
since even *if* that happened the insurance would cover it,
I don't use the damn things any more. YMMV.
>I have wheel locks installed on my TJ stock rims. I rotated my tires
>this week only to discover that the dealer who did the previous
>rotation over torqued all the wheel lug nuts. Some of them required a
>huge breaker bar to get off.
>When I went to take off the wheel lock I broke the inside keying.
>I sent away for a new key but is there a way to get them off or break
>them if I get a flat. My spare still has the lock on and 3 of the
>other wheels. I will be offroading over the weekend and could break a
>bead which will require me to change the tire.
>So I need to know how to break the lock off. What tools do I need?
--
Bob C.
Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)
"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov
Guest
Posts: n/a
Re: Wheel lock
most shops just hammer on a slightly larger socket and muscle it off with an
impact wrench.
KH
"Bob Casanova" <nospam@buzz.off> wrote in message
news:e4jslvcve97eottsmo6n3ignkps6bg7iq0@4ax.com...
> On 9 Sep 2003 06:58:55 -0700, the following appeared in
> rec.autos.makers.jeep+******, posted by
> snowboardripper@hotmail.com (Snowboardripper):
>
> I posted this in response to another question about wheel
> locks. Sounds like we used the same tire dealer... ;-)
>
> "If you do, make damn sure no tire-change moron with an
> impact wrench gets at them. After *shearing* two keys on my
> McGard locks, it took a spare set of keys JB Welded to the
> locks and a 450 lb ft impact wrench to get them off. They
> did *not* go back on..."
>
> SInce I don't need this hassle again, and since the chance
> of someone ripping off my stock wheels is slim-to-zero, and
> since even *if* that happened the insurance would cover it,
> I don't use the damn things any more. YMMV.
>
> >I have wheel locks installed on my TJ stock rims. I rotated my tires
> >this week only to discover that the dealer who did the previous
> >rotation over torqued all the wheel lug nuts. Some of them required a
> >huge breaker bar to get off.
> >When I went to take off the wheel lock I broke the inside keying.
> >I sent away for a new key but is there a way to get them off or break
> >them if I get a flat. My spare still has the lock on and 3 of the
> >other wheels. I will be offroading over the weekend and could break a
> >bead which will require me to change the tire.
> >So I need to know how to break the lock off. What tools do I need?
>
> --
>
> Bob C.
>
> Reply to Bob-Casanova @ worldnet.att.net
> (without the spaces, of course)
>
> "The most exciting phrase to hear in science,
> the one that heralds new discoveries, is not
> 'Eureka!' but 'That's funny...'"
> - Isaac Asimov
impact wrench.
KH
"Bob Casanova" <nospam@buzz.off> wrote in message
news:e4jslvcve97eottsmo6n3ignkps6bg7iq0@4ax.com...
> On 9 Sep 2003 06:58:55 -0700, the following appeared in
> rec.autos.makers.jeep+******, posted by
> snowboardripper@hotmail.com (Snowboardripper):
>
> I posted this in response to another question about wheel
> locks. Sounds like we used the same tire dealer... ;-)
>
> "If you do, make damn sure no tire-change moron with an
> impact wrench gets at them. After *shearing* two keys on my
> McGard locks, it took a spare set of keys JB Welded to the
> locks and a 450 lb ft impact wrench to get them off. They
> did *not* go back on..."
>
> SInce I don't need this hassle again, and since the chance
> of someone ripping off my stock wheels is slim-to-zero, and
> since even *if* that happened the insurance would cover it,
> I don't use the damn things any more. YMMV.
>
> >I have wheel locks installed on my TJ stock rims. I rotated my tires
> >this week only to discover that the dealer who did the previous
> >rotation over torqued all the wheel lug nuts. Some of them required a
> >huge breaker bar to get off.
> >When I went to take off the wheel lock I broke the inside keying.
> >I sent away for a new key but is there a way to get them off or break
> >them if I get a flat. My spare still has the lock on and 3 of the
> >other wheels. I will be offroading over the weekend and could break a
> >bead which will require me to change the tire.
> >So I need to know how to break the lock off. What tools do I need?
>
> --
>
> Bob C.
>
> Reply to Bob-Casanova @ worldnet.att.net
> (without the spaces, of course)
>
> "The most exciting phrase to hear in science,
> the one that heralds new discoveries, is not
> 'Eureka!' but 'That's funny...'"
> - Isaac Asimov
Guest
Posts: n/a
Re: Wheel lock
most shops just hammer on a slightly larger socket and muscle it off with an
impact wrench.
KH
"Bob Casanova" <nospam@buzz.off> wrote in message
news:e4jslvcve97eottsmo6n3ignkps6bg7iq0@4ax.com...
> On 9 Sep 2003 06:58:55 -0700, the following appeared in
> rec.autos.makers.jeep+******, posted by
> snowboardripper@hotmail.com (Snowboardripper):
>
> I posted this in response to another question about wheel
> locks. Sounds like we used the same tire dealer... ;-)
>
> "If you do, make damn sure no tire-change moron with an
> impact wrench gets at them. After *shearing* two keys on my
> McGard locks, it took a spare set of keys JB Welded to the
> locks and a 450 lb ft impact wrench to get them off. They
> did *not* go back on..."
>
> SInce I don't need this hassle again, and since the chance
> of someone ripping off my stock wheels is slim-to-zero, and
> since even *if* that happened the insurance would cover it,
> I don't use the damn things any more. YMMV.
>
> >I have wheel locks installed on my TJ stock rims. I rotated my tires
> >this week only to discover that the dealer who did the previous
> >rotation over torqued all the wheel lug nuts. Some of them required a
> >huge breaker bar to get off.
> >When I went to take off the wheel lock I broke the inside keying.
> >I sent away for a new key but is there a way to get them off or break
> >them if I get a flat. My spare still has the lock on and 3 of the
> >other wheels. I will be offroading over the weekend and could break a
> >bead which will require me to change the tire.
> >So I need to know how to break the lock off. What tools do I need?
>
> --
>
> Bob C.
>
> Reply to Bob-Casanova @ worldnet.att.net
> (without the spaces, of course)
>
> "The most exciting phrase to hear in science,
> the one that heralds new discoveries, is not
> 'Eureka!' but 'That's funny...'"
> - Isaac Asimov
impact wrench.
KH
"Bob Casanova" <nospam@buzz.off> wrote in message
news:e4jslvcve97eottsmo6n3ignkps6bg7iq0@4ax.com...
> On 9 Sep 2003 06:58:55 -0700, the following appeared in
> rec.autos.makers.jeep+******, posted by
> snowboardripper@hotmail.com (Snowboardripper):
>
> I posted this in response to another question about wheel
> locks. Sounds like we used the same tire dealer... ;-)
>
> "If you do, make damn sure no tire-change moron with an
> impact wrench gets at them. After *shearing* two keys on my
> McGard locks, it took a spare set of keys JB Welded to the
> locks and a 450 lb ft impact wrench to get them off. They
> did *not* go back on..."
>
> SInce I don't need this hassle again, and since the chance
> of someone ripping off my stock wheels is slim-to-zero, and
> since even *if* that happened the insurance would cover it,
> I don't use the damn things any more. YMMV.
>
> >I have wheel locks installed on my TJ stock rims. I rotated my tires
> >this week only to discover that the dealer who did the previous
> >rotation over torqued all the wheel lug nuts. Some of them required a
> >huge breaker bar to get off.
> >When I went to take off the wheel lock I broke the inside keying.
> >I sent away for a new key but is there a way to get them off or break
> >them if I get a flat. My spare still has the lock on and 3 of the
> >other wheels. I will be offroading over the weekend and could break a
> >bead which will require me to change the tire.
> >So I need to know how to break the lock off. What tools do I need?
>
> --
>
> Bob C.
>
> Reply to Bob-Casanova @ worldnet.att.net
> (without the spaces, of course)
>
> "The most exciting phrase to hear in science,
> the one that heralds new discoveries, is not
> 'Eureka!' but 'That's funny...'"
> - Isaac Asimov
Guest
Posts: n/a
Re: Wheel lock
"Bob Casanova" <nospam@buzz.off> wrote in message
news:e4jslvcve97eottsmo6n3ignkps6bg7iq0@4ax.com...
....
> SInce I don't need this hassle again, and since the chance
> of someone ripping off my stock wheels is slim-to-zero, and
> since even *if* that happened the insurance would cover it,
> I don't use the damn things any more. YMMV.
Me, too... after working tires for several years in my youth,
I have an abiding disrespect for locking lugs. You *will* lose
the lock, and find out only at the worst possible time that
it's gone.
__
Steve
..
Guest
Posts: n/a
Re: Wheel lock
"Bob Casanova" <nospam@buzz.off> wrote in message
news:e4jslvcve97eottsmo6n3ignkps6bg7iq0@4ax.com...
....
> SInce I don't need this hassle again, and since the chance
> of someone ripping off my stock wheels is slim-to-zero, and
> since even *if* that happened the insurance would cover it,
> I don't use the damn things any more. YMMV.
Me, too... after working tires for several years in my youth,
I have an abiding disrespect for locking lugs. You *will* lose
the lock, and find out only at the worst possible time that
it's gone.
__
Steve
..
Guest
Posts: n/a
Re: Wheel lock
On Tue, 9 Sep 2003 16:17:42 -0700, the following appeared in
rec.autos.makers.jeep+******, posted by "Kevin in San Diego"
<kevin_hedstrom@yahoo.com>:
That doesn't work too well with McGard locks; they're round.
>most shops just hammer on a slightly larger socket and muscle it off with an
>impact wrench.
>KH
>
>"Bob Casanova" <nospam@buzz.off> wrote in message
>news:e4jslvcve97eottsmo6n3ignkps6bg7iq0@4ax.com.. .
>> On 9 Sep 2003 06:58:55 -0700, the following appeared in
>> rec.autos.makers.jeep+******, posted by
>> snowboardripper@hotmail.com (Snowboardripper):
>>
>> I posted this in response to another question about wheel
>> locks. Sounds like we used the same tire dealer... ;-)
>>
>> "If you do, make damn sure no tire-change moron with an
>> impact wrench gets at them. After *shearing* two keys on my
>> McGard locks, it took a spare set of keys JB Welded to the
>> locks and a 450 lb ft impact wrench to get them off. They
>> did *not* go back on..."
>>
>> SInce I don't need this hassle again, and since the chance
>> of someone ripping off my stock wheels is slim-to-zero, and
>> since even *if* that happened the insurance would cover it,
>> I don't use the damn things any more. YMMV.
>>
>> >I have wheel locks installed on my TJ stock rims. I rotated my tires
>> >this week only to discover that the dealer who did the previous
>> >rotation over torqued all the wheel lug nuts. Some of them required a
>> >huge breaker bar to get off.
>> >When I went to take off the wheel lock I broke the inside keying.
>> >I sent away for a new key but is there a way to get them off or break
>> >them if I get a flat. My spare still has the lock on and 3 of the
>> >other wheels. I will be offroading over the weekend and could break a
>> >bead which will require me to change the tire.
>> >So I need to know how to break the lock off. What tools do I need?
>>
>> --
>>
>> Bob C.
>>
>> Reply to Bob-Casanova @ worldnet.att.net
>> (without the spaces, of course)
>>
>> "The most exciting phrase to hear in science,
>> the one that heralds new discoveries, is not
>> 'Eureka!' but 'That's funny...'"
>> - Isaac Asimov
>
--
Bob C.
Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)
"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov
rec.autos.makers.jeep+******, posted by "Kevin in San Diego"
<kevin_hedstrom@yahoo.com>:
That doesn't work too well with McGard locks; they're round.
>most shops just hammer on a slightly larger socket and muscle it off with an
>impact wrench.
>KH
>
>"Bob Casanova" <nospam@buzz.off> wrote in message
>news:e4jslvcve97eottsmo6n3ignkps6bg7iq0@4ax.com.. .
>> On 9 Sep 2003 06:58:55 -0700, the following appeared in
>> rec.autos.makers.jeep+******, posted by
>> snowboardripper@hotmail.com (Snowboardripper):
>>
>> I posted this in response to another question about wheel
>> locks. Sounds like we used the same tire dealer... ;-)
>>
>> "If you do, make damn sure no tire-change moron with an
>> impact wrench gets at them. After *shearing* two keys on my
>> McGard locks, it took a spare set of keys JB Welded to the
>> locks and a 450 lb ft impact wrench to get them off. They
>> did *not* go back on..."
>>
>> SInce I don't need this hassle again, and since the chance
>> of someone ripping off my stock wheels is slim-to-zero, and
>> since even *if* that happened the insurance would cover it,
>> I don't use the damn things any more. YMMV.
>>
>> >I have wheel locks installed on my TJ stock rims. I rotated my tires
>> >this week only to discover that the dealer who did the previous
>> >rotation over torqued all the wheel lug nuts. Some of them required a
>> >huge breaker bar to get off.
>> >When I went to take off the wheel lock I broke the inside keying.
>> >I sent away for a new key but is there a way to get them off or break
>> >them if I get a flat. My spare still has the lock on and 3 of the
>> >other wheels. I will be offroading over the weekend and could break a
>> >bead which will require me to change the tire.
>> >So I need to know how to break the lock off. What tools do I need?
>>
>> --
>>
>> Bob C.
>>
>> Reply to Bob-Casanova @ worldnet.att.net
>> (without the spaces, of course)
>>
>> "The most exciting phrase to hear in science,
>> the one that heralds new discoveries, is not
>> 'Eureka!' but 'That's funny...'"
>> - Isaac Asimov
>
--
Bob C.
Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)
"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov
Guest
Posts: n/a
Re: Wheel lock
On Tue, 9 Sep 2003 16:17:42 -0700, the following appeared in
rec.autos.makers.jeep+******, posted by "Kevin in San Diego"
<kevin_hedstrom@yahoo.com>:
That doesn't work too well with McGard locks; they're round.
>most shops just hammer on a slightly larger socket and muscle it off with an
>impact wrench.
>KH
>
>"Bob Casanova" <nospam@buzz.off> wrote in message
>news:e4jslvcve97eottsmo6n3ignkps6bg7iq0@4ax.com.. .
>> On 9 Sep 2003 06:58:55 -0700, the following appeared in
>> rec.autos.makers.jeep+******, posted by
>> snowboardripper@hotmail.com (Snowboardripper):
>>
>> I posted this in response to another question about wheel
>> locks. Sounds like we used the same tire dealer... ;-)
>>
>> "If you do, make damn sure no tire-change moron with an
>> impact wrench gets at them. After *shearing* two keys on my
>> McGard locks, it took a spare set of keys JB Welded to the
>> locks and a 450 lb ft impact wrench to get them off. They
>> did *not* go back on..."
>>
>> SInce I don't need this hassle again, and since the chance
>> of someone ripping off my stock wheels is slim-to-zero, and
>> since even *if* that happened the insurance would cover it,
>> I don't use the damn things any more. YMMV.
>>
>> >I have wheel locks installed on my TJ stock rims. I rotated my tires
>> >this week only to discover that the dealer who did the previous
>> >rotation over torqued all the wheel lug nuts. Some of them required a
>> >huge breaker bar to get off.
>> >When I went to take off the wheel lock I broke the inside keying.
>> >I sent away for a new key but is there a way to get them off or break
>> >them if I get a flat. My spare still has the lock on and 3 of the
>> >other wheels. I will be offroading over the weekend and could break a
>> >bead which will require me to change the tire.
>> >So I need to know how to break the lock off. What tools do I need?
>>
>> --
>>
>> Bob C.
>>
>> Reply to Bob-Casanova @ worldnet.att.net
>> (without the spaces, of course)
>>
>> "The most exciting phrase to hear in science,
>> the one that heralds new discoveries, is not
>> 'Eureka!' but 'That's funny...'"
>> - Isaac Asimov
>
--
Bob C.
Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)
"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov
rec.autos.makers.jeep+******, posted by "Kevin in San Diego"
<kevin_hedstrom@yahoo.com>:
That doesn't work too well with McGard locks; they're round.
>most shops just hammer on a slightly larger socket and muscle it off with an
>impact wrench.
>KH
>
>"Bob Casanova" <nospam@buzz.off> wrote in message
>news:e4jslvcve97eottsmo6n3ignkps6bg7iq0@4ax.com.. .
>> On 9 Sep 2003 06:58:55 -0700, the following appeared in
>> rec.autos.makers.jeep+******, posted by
>> snowboardripper@hotmail.com (Snowboardripper):
>>
>> I posted this in response to another question about wheel
>> locks. Sounds like we used the same tire dealer... ;-)
>>
>> "If you do, make damn sure no tire-change moron with an
>> impact wrench gets at them. After *shearing* two keys on my
>> McGard locks, it took a spare set of keys JB Welded to the
>> locks and a 450 lb ft impact wrench to get them off. They
>> did *not* go back on..."
>>
>> SInce I don't need this hassle again, and since the chance
>> of someone ripping off my stock wheels is slim-to-zero, and
>> since even *if* that happened the insurance would cover it,
>> I don't use the damn things any more. YMMV.
>>
>> >I have wheel locks installed on my TJ stock rims. I rotated my tires
>> >this week only to discover that the dealer who did the previous
>> >rotation over torqued all the wheel lug nuts. Some of them required a
>> >huge breaker bar to get off.
>> >When I went to take off the wheel lock I broke the inside keying.
>> >I sent away for a new key but is there a way to get them off or break
>> >them if I get a flat. My spare still has the lock on and 3 of the
>> >other wheels. I will be offroading over the weekend and could break a
>> >bead which will require me to change the tire.
>> >So I need to know how to break the lock off. What tools do I need?
>>
>> --
>>
>> Bob C.
>>
>> Reply to Bob-Casanova @ worldnet.att.net
>> (without the spaces, of course)
>>
>> "The most exciting phrase to hear in science,
>> the one that heralds new discoveries, is not
>> 'Eureka!' but 'That's funny...'"
>> - Isaac Asimov
>
--
Bob C.
Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)
"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov
Guest
Posts: n/a
Re: Wheel lock
On Wed, 10 Sep 2003 21:16:59 GMT, the following appeared in
rec.autos.makers.jeep+******, posted by "Dave Milne"
<jeep@_nospam_milne.info>:
I used JBWeld filled epoxy and individual lock keys (for the
greatest shear area), but the principle's the same.
>another trick is told weld something on top of the locknut if you can get at
>it. Bolts or old sockets work quite well.
--
Bob C.
Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)
"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov
rec.autos.makers.jeep+******, posted by "Dave Milne"
<jeep@_nospam_milne.info>:
I used JBWeld filled epoxy and individual lock keys (for the
greatest shear area), but the principle's the same.
>another trick is told weld something on top of the locknut if you can get at
>it. Bolts or old sockets work quite well.
--
Bob C.
Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)
"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov
Guest
Posts: n/a
Re: Wheel lock
On Wed, 10 Sep 2003 21:16:59 GMT, the following appeared in
rec.autos.makers.jeep+******, posted by "Dave Milne"
<jeep@_nospam_milne.info>:
I used JBWeld filled epoxy and individual lock keys (for the
greatest shear area), but the principle's the same.
>another trick is told weld something on top of the locknut if you can get at
>it. Bolts or old sockets work quite well.
--
Bob C.
Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)
"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov
rec.autos.makers.jeep+******, posted by "Dave Milne"
<jeep@_nospam_milne.info>:
I used JBWeld filled epoxy and individual lock keys (for the
greatest shear area), but the principle's the same.
>another trick is told weld something on top of the locknut if you can get at
>it. Bolts or old sockets work quite well.
--
Bob C.
Reply to Bob-Casanova @ worldnet.att.net
(without the spaces, of course)
"The most exciting phrase to hear in science,
the one that heralds new discoveries, is not
'Eureka!' but 'That's funny...'"
- Isaac Asimov
Guest
Posts: n/a
Re: Wheel lock
well done. I'll have to re-evaluate JB Weld - I went off it big time after
discovering that a car I bought had a JB Welded in sparkplug. Of course I
only discovered this when the plug came out along with JB Weld powder,
leaving behind a smooth, smooth sparkplug hole :-( Guess JBW *is* stronger
than I thought.
Dave Milne, Scotland
'99 TJ 4.0 Sahara
"Bob Casanova" <nospam@buzz.off> wrote in message
news:7qp1mvk6a7g1uj27tje3b9veki45e6c8pk@4ax.com...
: On Wed, 10 Sep 2003 21:16:59 GMT, the following appeared in
: rec.autos.makers.jeep+******, posted by "Dave Milne"
: <jeep@_nospam_milne.info>:
:
: I used JBWeld filled epoxy and individual lock keys (for the
: greatest shear area), but the principle's the same.
:
: >another trick is told weld something on top of the locknut if you can get
at
: >it. Bolts or old sockets work quite well.
:
: --
:
: Bob C.
:
: Reply to Bob-Casanova @ worldnet.att.net
: (without the spaces, of course)
:
: "The most exciting phrase to hear in science,
: the one that heralds new discoveries, is not
: 'Eureka!' but 'That's funny...'"
: - Isaac Asimov
discovering that a car I bought had a JB Welded in sparkplug. Of course I
only discovered this when the plug came out along with JB Weld powder,
leaving behind a smooth, smooth sparkplug hole :-( Guess JBW *is* stronger
than I thought.
Dave Milne, Scotland
'99 TJ 4.0 Sahara
"Bob Casanova" <nospam@buzz.off> wrote in message
news:7qp1mvk6a7g1uj27tje3b9veki45e6c8pk@4ax.com...
: On Wed, 10 Sep 2003 21:16:59 GMT, the following appeared in
: rec.autos.makers.jeep+******, posted by "Dave Milne"
: <jeep@_nospam_milne.info>:
:
: I used JBWeld filled epoxy and individual lock keys (for the
: greatest shear area), but the principle's the same.
:
: >another trick is told weld something on top of the locknut if you can get
at
: >it. Bolts or old sockets work quite well.
:
: --
:
: Bob C.
:
: Reply to Bob-Casanova @ worldnet.att.net
: (without the spaces, of course)
:
: "The most exciting phrase to hear in science,
: the one that heralds new discoveries, is not
: 'Eureka!' but 'That's funny...'"
: - Isaac Asimov
