Snow

Take a look here.. think it lists just about all the headers available...
http://www.4wdlinks.com/cgi-bin/link...ategory&CID=24

Snow...

"curt" <h_curtis@verizon.net> wrote in message
news:o%a7b.3789$ej1.361@nwrdny01.gnilink.net...
> Thanks to the group, I put in the hydraulic system for my clutch and it
> works fine. Total cost $125 US. It was a pretty simple job.
>
> While I was under there, I discovered I have a few problems with my
exhaust.
> Bottom line is the whole thing needs replaced from manifold to tail. Ouch
> $$$$. I am not sure what brand or OEM or what, but I am looking for
> something that would get me better mileage. Is that possible? What about
> better horse power and gas mileage...that would be even better. Would a
> higher performance set up do anything for me, or do I just go stock?
>
> Any suggestions or websites to look at would be great. I do have some
> options on manifold or header from the group, but now I am looking for a
> whole exhaust, so my brain says spend a little more and get something
> better, if it will help in fuel economy and/or power.
>
> Thanks for any help.
> Curt
>
>

curt

Thanks guys. I just bought a Borla header and cat back. Also, bought a
high flow cat. I got it all from Summit in OH, since I live in PA. It will
be here tomorrow or the next day with standard ground delivery and shipped
today. I was surprised they had all of that in stock, but they did. Summit
must be huge. I have bought stuff from them before, but I just didn't think
they would carry something so unusual.

I'll let you know how the install goes and if it makes any difference in
performance and gas mileage, if anyone cares. I hope it does due to the
cost. It was bit more than stock and quite a bit more than after market.
We shall see if I am falling for hype or did ok on this.

Take care,
Curt

"Snow" <snowball_2004@msn.com> wrote in message
news:5Rk7b.2069$Nx6.281730@news20.bellglobal.com.. .
> Take a look here.. think it lists just about all the headers available...
>
http://www.4wdlinks.com/cgi-bin/link...ategory&CID=24
>
> Snow...
>
> "curt" <h_curtis@verizon.net> wrote in message
> news:o%a7b.3789$ej1.361@nwrdny01.gnilink.net...
> > Thanks to the group, I put in the hydraulic system for my clutch and it
> > works fine. Total cost $125 US. It was a pretty simple job.
> >
> > While I was under there, I discovered I have a few problems with my
> exhaust.
> > Bottom line is the whole thing needs replaced from manifold to tail.
Ouch
> > $$$$. I am not sure what brand or OEM or what, but I am looking for
> > something that would get me better mileage. Is that possible? What
about
> > better horse power and gas mileage...that would be even better. Would a
> > higher performance set up do anything for me, or do I just go stock?
> >
> > Any suggestions or websites to look at would be great. I do have some
> > options on manifold or header from the group, but now I am looking for a
> > whole exhaust, so my brain says spend a little more and get something
> > better, if it will help in fuel economy and/or power.
> >
> > Thanks for any help.
> > Curt
> >
> >
>
>

curt

Thanks guys. I just bought a Borla header and cat back. Also, bought a
high flow cat. I got it all from Summit in OH, since I live in PA. It will
be here tomorrow or the next day with standard ground delivery and shipped
today. I was surprised they had all of that in stock, but they did. Summit
must be huge. I have bought stuff from them before, but I just didn't think
they would carry something so unusual.

I'll let you know how the install goes and if it makes any difference in
performance and gas mileage, if anyone cares. I hope it does due to the
cost. It was bit more than stock and quite a bit more than after market.
We shall see if I am falling for hype or did ok on this.

Take care,
Curt

"Snow" <snowball_2004@msn.com> wrote in message
news:5Rk7b.2069$Nx6.281730@news20.bellglobal.com.. .
> Take a look here.. think it lists just about all the headers available...
>
http://www.4wdlinks.com/cgi-bin/link...ategory&CID=24
>
> Snow...
>
> "curt" <h_curtis@verizon.net> wrote in message
> news:o%a7b.3789$ej1.361@nwrdny01.gnilink.net...
> > Thanks to the group, I put in the hydraulic system for my clutch and it
> > works fine. Total cost $125 US. It was a pretty simple job.
> >
> > While I was under there, I discovered I have a few problems with my
> exhaust.
> > Bottom line is the whole thing needs replaced from manifold to tail.
Ouch
> > $$$$. I am not sure what brand or OEM or what, but I am looking for
> > something that would get me better mileage. Is that possible? What
about
> > better horse power and gas mileage...that would be even better. Would a
> > higher performance set up do anything for me, or do I just go stock?
> >
> > Any suggestions or websites to look at would be great. I do have some
> > options on manifold or header from the group, but now I am looking for a
> > whole exhaust, so my brain says spend a little more and get something
> > better, if it will help in fuel economy and/or power.
> >
> > Thanks for any help.
> > Curt
> >
> >
>
>