Re: Welder
#1
Guest
Posts: n/a
Re: Welder
Torches and a good MIG
Dana Rohleder wrote:
>
> All
>
> I have never welded before, but I would like to start. Rather than
> collecting a bunch of technology that I'll likely replace, what would you
> recommend? I'm thinking of going straight for the plasma welder/cutter -
> something light for the home garage. My first inclination was to simply go
> with a small set of portable torches. However, I would like to do a fair
> amount of body work, and I understand the torches will burn through light
> gauge steel in today's cars. But I would like to do some cutting. Since I
> already have a good air compressor, I am thinking I can get the plasma
> welder/cutter and it should do fine for me, as opposed to torches and a MIG
> welder. That way I don't have to deal with O/A tanks. Any thoughts?
> --
> Dana
>
> "There's an old saying in Tennessee-I know it's in Texas, probably in
> Tennessee-that says, fool me once, shame on-shame on you. Fool me-you can't
> get fooled again."- G.W. Bush, Nashville, Tenn., Sept. 17, 2002
Dana Rohleder wrote:
>
> All
>
> I have never welded before, but I would like to start. Rather than
> collecting a bunch of technology that I'll likely replace, what would you
> recommend? I'm thinking of going straight for the plasma welder/cutter -
> something light for the home garage. My first inclination was to simply go
> with a small set of portable torches. However, I would like to do a fair
> amount of body work, and I understand the torches will burn through light
> gauge steel in today's cars. But I would like to do some cutting. Since I
> already have a good air compressor, I am thinking I can get the plasma
> welder/cutter and it should do fine for me, as opposed to torches and a MIG
> welder. That way I don't have to deal with O/A tanks. Any thoughts?
> --
> Dana
>
> "There's an old saying in Tennessee-I know it's in Texas, probably in
> Tennessee-that says, fool me once, shame on-shame on you. Fool me-you can't
> get fooled again."- G.W. Bush, Nashville, Tenn., Sept. 17, 2002
#2
Guest
Posts: n/a
Re: Welder
"Roy Jenson" <rkjenson@qwest.net> wrote in message
news:3F3F8BB7.51B5FBFA@qwest.net...
> Torches and a good MIG
i agree with roy 100%.
--
Nathan W. Collier
http://7SlotGrille.com
news:3F3F8BB7.51B5FBFA@qwest.net...
> Torches and a good MIG
i agree with roy 100%.
--
Nathan W. Collier
http://7SlotGrille.com
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)