Re: starting trouble with my YJ
#1
Guest
Posts: n/a
Re: starting trouble with my YJ
My jeep is a 95 with a 4 cyl.I checked the mesh ground that connects to the firewall and it does look alittle "tattered" but still in one peice.Do you mean the ground that is connected to top of fuel tank
--
cj hupp
-----------------------------------------------------------------------
View this thread: http://www.carstalk.net/viewtopic-358694.htm
Send from http://www.carstalk.ne
#2
Guest
Posts: n/a
Re: starting trouble with my YJ
Nope, that mesh one is the main body ground. All the power must go
through it. The ground for the fuel pump on some YJ's is a wire on the
frame of the emergency brake.
I test the body ground by using a booster cable from the battery
negative to a good solid metal point on the body.
There also is a mesh wire across one of the engine mounts for the
frame. That might affect the pump if the pump grounds at the back. The
rear ground is 'usually' for the gas gauge though.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
cj hupp wrote:
>
> My jeep is a 95 with a 4 cyl.I checked the mesh ground that connects to the firewall and it does look alittle "tattered" but still in one peice.Do you mean the ground that is connected to top of fuel tank?
>
> --
> cj hupp
>
> ------------------------------------------------------------------------
> View this thread: http://www.carstalk.net/viewtopic-358694.html
>
> Send from http://www.carstalk.net
through it. The ground for the fuel pump on some YJ's is a wire on the
frame of the emergency brake.
I test the body ground by using a booster cable from the battery
negative to a good solid metal point on the body.
There also is a mesh wire across one of the engine mounts for the
frame. That might affect the pump if the pump grounds at the back. The
rear ground is 'usually' for the gas gauge though.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
cj hupp wrote:
>
> My jeep is a 95 with a 4 cyl.I checked the mesh ground that connects to the firewall and it does look alittle "tattered" but still in one peice.Do you mean the ground that is connected to top of fuel tank?
>
> --
> cj hupp
>
> ------------------------------------------------------------------------
> View this thread: http://www.carstalk.net/viewtopic-358694.html
>
> Send from http://www.carstalk.net
#3
Guest
Posts: n/a
Re: starting trouble with my YJ
Nope, that mesh one is the main body ground. All the power must go
through it. The ground for the fuel pump on some YJ's is a wire on the
frame of the emergency brake.
I test the body ground by using a booster cable from the battery
negative to a good solid metal point on the body.
There also is a mesh wire across one of the engine mounts for the
frame. That might affect the pump if the pump grounds at the back. The
rear ground is 'usually' for the gas gauge though.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
cj hupp wrote:
>
> My jeep is a 95 with a 4 cyl.I checked the mesh ground that connects to the firewall and it does look alittle "tattered" but still in one peice.Do you mean the ground that is connected to top of fuel tank?
>
> --
> cj hupp
>
> ------------------------------------------------------------------------
> View this thread: http://www.carstalk.net/viewtopic-358694.html
>
> Send from http://www.carstalk.net
through it. The ground for the fuel pump on some YJ's is a wire on the
frame of the emergency brake.
I test the body ground by using a booster cable from the battery
negative to a good solid metal point on the body.
There also is a mesh wire across one of the engine mounts for the
frame. That might affect the pump if the pump grounds at the back. The
rear ground is 'usually' for the gas gauge though.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
cj hupp wrote:
>
> My jeep is a 95 with a 4 cyl.I checked the mesh ground that connects to the firewall and it does look alittle "tattered" but still in one peice.Do you mean the ground that is connected to top of fuel tank?
>
> --
> cj hupp
>
> ------------------------------------------------------------------------
> View this thread: http://www.carstalk.net/viewtopic-358694.html
>
> Send from http://www.carstalk.net
#4
Guest
Posts: n/a
Re: starting trouble with my YJ
Nope, that mesh one is the main body ground. All the power must go
through it. The ground for the fuel pump on some YJ's is a wire on the
frame of the emergency brake.
I test the body ground by using a booster cable from the battery
negative to a good solid metal point on the body.
There also is a mesh wire across one of the engine mounts for the
frame. That might affect the pump if the pump grounds at the back. The
rear ground is 'usually' for the gas gauge though.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
cj hupp wrote:
>
> My jeep is a 95 with a 4 cyl.I checked the mesh ground that connects to the firewall and it does look alittle "tattered" but still in one peice.Do you mean the ground that is connected to top of fuel tank?
>
> --
> cj hupp
>
> ------------------------------------------------------------------------
> View this thread: http://www.carstalk.net/viewtopic-358694.html
>
> Send from http://www.carstalk.net
through it. The ground for the fuel pump on some YJ's is a wire on the
frame of the emergency brake.
I test the body ground by using a booster cable from the battery
negative to a good solid metal point on the body.
There also is a mesh wire across one of the engine mounts for the
frame. That might affect the pump if the pump grounds at the back. The
rear ground is 'usually' for the gas gauge though.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
cj hupp wrote:
>
> My jeep is a 95 with a 4 cyl.I checked the mesh ground that connects to the firewall and it does look alittle "tattered" but still in one peice.Do you mean the ground that is connected to top of fuel tank?
>
> --
> cj hupp
>
> ------------------------------------------------------------------------
> View this thread: http://www.carstalk.net/viewtopic-358694.html
>
> Send from http://www.carstalk.net
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)