Re: Pix are up!
09-23-2003, 11:10 AM
#1
Guest
Posts: n/a
Re: Pix are up!
nice work man! those new tires look soooo huge compared to the 31's!! must
be nice to have a shop to work in. i have access to a shop too but only the
tools-sure makes it nice to at least have that though!
damn-if i lived down south i'd definitely go check it out...
"Cal Wheeler" <cal@whee.ler> wrote in message
news:bkmcuf$abj$0@pita.alt.net...
> Hey Gerald, and any other YJ owners...here are the pics of my current YJ
> progress to date!
>
> http://pages.sbcglobal.net/calwheele...yjproject.html
>
be nice to have a shop to work in. i have access to a shop too but only the
tools-sure makes it nice to at least have that though!
damn-if i lived down south i'd definitely go check it out...
"Cal Wheeler" <cal@whee.ler> wrote in message
news:bkmcuf$abj$0@pita.alt.net...
> Hey Gerald, and any other YJ owners...here are the pics of my current YJ
> progress to date!
>
> http://pages.sbcglobal.net/calwheele...yjproject.html
>
09-23-2003, 11:44 AM
#2
Guest
Posts: n/a
Re: Pix are up!
Looks like Cal will need to radius and tub the fender wells, or be
satisfied with two inches of travel:
http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
serg wrote:
>
> nice work man! those new tires look soooo huge compared to the 31's!! must
> be nice to have a shop to work in. i have access to a shop too but only the
> tools-sure makes it nice to at least have that though!
> damn-if i lived down south i'd definitely go check it out...
satisfied with two inches of travel:
http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
serg wrote:
>
> nice work man! those new tires look soooo huge compared to the 31's!! must
> be nice to have a shop to work in. i have access to a shop too but only the
> tools-sure makes it nice to at least have that though!
> damn-if i lived down south i'd definitely go check it out...
09-23-2003, 11:44 AM
#3
Guest
Posts: n/a
Re: Pix are up!
Looks like Cal will need to radius and tub the fender wells, or be
satisfied with two inches of travel:
http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
serg wrote:
>
> nice work man! those new tires look soooo huge compared to the 31's!! must
> be nice to have a shop to work in. i have access to a shop too but only the
> tools-sure makes it nice to at least have that though!
> damn-if i lived down south i'd definitely go check it out...
satisfied with two inches of travel:
http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
serg wrote:
>
> nice work man! those new tires look soooo huge compared to the 31's!! must
> be nice to have a shop to work in. i have access to a shop too but only the
> tools-sure makes it nice to at least have that though!
> damn-if i lived down south i'd definitely go check it out...
09-24-2003, 01:56 AM
#4
Guest
Posts: n/a
Re: Pix are up!
serg wrote:
> nice work man! those new tires look soooo huge compared to the 31's!! must
> be nice to have a shop to work in. i have access to a shop too but only the
> tools-sure makes it nice to at least have that though!
> damn-if i lived down south i'd definitely go check it out...
>
Thanks, serg. Those meats are so big it's almost embarrassing. They take
some getting used to. I'm thinking of some kind of sprung bar to make
the ingress a little more graceful...
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkmcuf$abj$0@pita.alt.net...
>
>>Hey Gerald, and any other YJ owners...here are the pics of my current YJ
>>progress to date!
>>
>>http://pages.sbcglobal.net/calwheele...yjproject.html
>>
>
>
>
> nice work man! those new tires look soooo huge compared to the 31's!! must
> be nice to have a shop to work in. i have access to a shop too but only the
> tools-sure makes it nice to at least have that though!
> damn-if i lived down south i'd definitely go check it out...
>
Thanks, serg. Those meats are so big it's almost embarrassing. They take
some getting used to. I'm thinking of some kind of sprung bar to make
the ingress a little more graceful...
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkmcuf$abj$0@pita.alt.net...
>
>>Hey Gerald, and any other YJ owners...here are the pics of my current YJ
>>progress to date!
>>
>>http://pages.sbcglobal.net/calwheele...yjproject.html
>>
>
>
>
09-24-2003, 01:56 AM
#5
Guest
Posts: n/a
Re: Pix are up!
serg wrote:
> nice work man! those new tires look soooo huge compared to the 31's!! must
> be nice to have a shop to work in. i have access to a shop too but only the
> tools-sure makes it nice to at least have that though!
> damn-if i lived down south i'd definitely go check it out...
>
Thanks, serg. Those meats are so big it's almost embarrassing. They take
some getting used to. I'm thinking of some kind of sprung bar to make
the ingress a little more graceful...
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkmcuf$abj$0@pita.alt.net...
>
>>Hey Gerald, and any other YJ owners...here are the pics of my current YJ
>>progress to date!
>>
>>http://pages.sbcglobal.net/calwheele...yjproject.html
>>
>
>
>
> nice work man! those new tires look soooo huge compared to the 31's!! must
> be nice to have a shop to work in. i have access to a shop too but only the
> tools-sure makes it nice to at least have that though!
> damn-if i lived down south i'd definitely go check it out...
>
Thanks, serg. Those meats are so big it's almost embarrassing. They take
some getting used to. I'm thinking of some kind of sprung bar to make
the ingress a little more graceful...
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkmcuf$abj$0@pita.alt.net...
>
>>Hey Gerald, and any other YJ owners...here are the pics of my current YJ
>>progress to date!
>>
>>http://pages.sbcglobal.net/calwheele...yjproject.html
>>
>
>
>
09-24-2003, 02:11 AM
#6
Guest
Posts: n/a
Re: Pix are up!
L.W.(ßill) ------ III wrote:
> Looks like Cal will need to radius and tub the fender wells, or be
> satisfied with two inches of travel:
> http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
I know. It looks inevitable. I was hoping the SOA would take care of
most of the lift (and it did), but not enough. This may sound silly, but
I'm going to install some air springs and try and offset the
Compression/Droop distances. So that my "normal" ride gives me more
travel in compression (currently 3" compress/7" droop).
I know that this may stiffen the ride too much, but I just want to try
it before I start carving into the body. Drilling holes in it, I have no
problem with. I did some major fender well cutting on my Silverado to
handle 33" Swampers, and I'll do it to the Jeep, but I'd rather keep it
as a last resort.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> serg wrote:
>
>>nice work man! those new tires look soooo huge compared to the 31's!! must
>>be nice to have a shop to work in. i have access to a shop too but only the
>>tools-sure makes it nice to at least have that though!
>>damn-if i lived down south i'd definitely go check it out...
> Looks like Cal will need to radius and tub the fender wells, or be
> satisfied with two inches of travel:
> http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
I know. It looks inevitable. I was hoping the SOA would take care of
most of the lift (and it did), but not enough. This may sound silly, but
I'm going to install some air springs and try and offset the
Compression/Droop distances. So that my "normal" ride gives me more
travel in compression (currently 3" compress/7" droop).
I know that this may stiffen the ride too much, but I just want to try
it before I start carving into the body. Drilling holes in it, I have no
problem with. I did some major fender well cutting on my Silverado to
handle 33" Swampers, and I'll do it to the Jeep, but I'd rather keep it
as a last resort.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> serg wrote:
>
>>nice work man! those new tires look soooo huge compared to the 31's!! must
>>be nice to have a shop to work in. i have access to a shop too but only the
>>tools-sure makes it nice to at least have that though!
>>damn-if i lived down south i'd definitely go check it out...
09-24-2003, 02:11 AM
#7
Guest
Posts: n/a
Re: Pix are up!
L.W.(ßill) ------ III wrote:
> Looks like Cal will need to radius and tub the fender wells, or be
> satisfied with two inches of travel:
> http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
I know. It looks inevitable. I was hoping the SOA would take care of
most of the lift (and it did), but not enough. This may sound silly, but
I'm going to install some air springs and try and offset the
Compression/Droop distances. So that my "normal" ride gives me more
travel in compression (currently 3" compress/7" droop).
I know that this may stiffen the ride too much, but I just want to try
it before I start carving into the body. Drilling holes in it, I have no
problem with. I did some major fender well cutting on my Silverado to
handle 33" Swampers, and I'll do it to the Jeep, but I'd rather keep it
as a last resort.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> serg wrote:
>
>>nice work man! those new tires look soooo huge compared to the 31's!! must
>>be nice to have a shop to work in. i have access to a shop too but only the
>>tools-sure makes it nice to at least have that though!
>>damn-if i lived down south i'd definitely go check it out...
> Looks like Cal will need to radius and tub the fender wells, or be
> satisfied with two inches of travel:
> http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
I know. It looks inevitable. I was hoping the SOA would take care of
most of the lift (and it did), but not enough. This may sound silly, but
I'm going to install some air springs and try and offset the
Compression/Droop distances. So that my "normal" ride gives me more
travel in compression (currently 3" compress/7" droop).
I know that this may stiffen the ride too much, but I just want to try
it before I start carving into the body. Drilling holes in it, I have no
problem with. I did some major fender well cutting on my Silverado to
handle 33" Swampers, and I'll do it to the Jeep, but I'd rather keep it
as a last resort.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> serg wrote:
>
>>nice work man! those new tires look soooo huge compared to the 31's!! must
>>be nice to have a shop to work in. i have access to a shop too but only the
>>tools-sure makes it nice to at least have that though!
>>damn-if i lived down south i'd definitely go check it out...
09-24-2003, 07:53 AM
#8
Guest
Posts: n/a
Re: Pix are up!
Consider swapping to TJ flares. They'll fit fine with some minor fender
well trimming, giving you a couple more inches of room. With those on my
rig (92YJ) along with approx 4.75" SUA suspension lift and 1.25" body lift,
35" MT/R fit with plenty of room. There's room for a 37" set, which will be
on there next time.
Terry.
"Cal Wheeler" <cal@whee.ler> wrote in message
news:bkrcj7$oio$0@pita.alt.net...
> L.W.(ßill) ------ III wrote:
>
> > Looks like Cal will need to radius and tub the fender wells, or be
> > satisfied with two inches of travel:
> > http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
>
> I know. It looks inevitable. I was hoping the SOA would take care of
> most of the lift (and it did), but not enough. This may sound silly, but
> I'm going to install some air springs and try and offset the
> Compression/Droop distances. So that my "normal" ride gives me more
> travel in compression (currently 3" compress/7" droop).
>
> I know that this may stiffen the ride too much, but I just want to try
> it before I start carving into the body. Drilling holes in it, I have no
> problem with. I did some major fender well cutting on my Silverado to
> handle 33" Swampers, and I'll do it to the Jeep, but I'd rather keep it
> as a last resort.
>
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > serg wrote:
> >
> >>nice work man! those new tires look soooo huge compared to the 31's!!
must
> >>be nice to have a shop to work in. i have access to a shop too but only
the
> >>tools-sure makes it nice to at least have that though!
> >>damn-if i lived down south i'd definitely go check it out...
>
well trimming, giving you a couple more inches of room. With those on my
rig (92YJ) along with approx 4.75" SUA suspension lift and 1.25" body lift,
35" MT/R fit with plenty of room. There's room for a 37" set, which will be
on there next time.
Terry.
"Cal Wheeler" <cal@whee.ler> wrote in message
news:bkrcj7$oio$0@pita.alt.net...
> L.W.(ßill) ------ III wrote:
>
> > Looks like Cal will need to radius and tub the fender wells, or be
> > satisfied with two inches of travel:
> > http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
>
> I know. It looks inevitable. I was hoping the SOA would take care of
> most of the lift (and it did), but not enough. This may sound silly, but
> I'm going to install some air springs and try and offset the
> Compression/Droop distances. So that my "normal" ride gives me more
> travel in compression (currently 3" compress/7" droop).
>
> I know that this may stiffen the ride too much, but I just want to try
> it before I start carving into the body. Drilling holes in it, I have no
> problem with. I did some major fender well cutting on my Silverado to
> handle 33" Swampers, and I'll do it to the Jeep, but I'd rather keep it
> as a last resort.
>
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > serg wrote:
> >
> >>nice work man! those new tires look soooo huge compared to the 31's!!
must
> >>be nice to have a shop to work in. i have access to a shop too but only
the
> >>tools-sure makes it nice to at least have that though!
> >>damn-if i lived down south i'd definitely go check it out...
>
09-24-2003, 07:53 AM
#9
Guest
Posts: n/a
Re: Pix are up!
Consider swapping to TJ flares. They'll fit fine with some minor fender
well trimming, giving you a couple more inches of room. With those on my
rig (92YJ) along with approx 4.75" SUA suspension lift and 1.25" body lift,
35" MT/R fit with plenty of room. There's room for a 37" set, which will be
on there next time.
Terry.
"Cal Wheeler" <cal@whee.ler> wrote in message
news:bkrcj7$oio$0@pita.alt.net...
> L.W.(ßill) ------ III wrote:
>
> > Looks like Cal will need to radius and tub the fender wells, or be
> > satisfied with two inches of travel:
> > http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
>
> I know. It looks inevitable. I was hoping the SOA would take care of
> most of the lift (and it did), but not enough. This may sound silly, but
> I'm going to install some air springs and try and offset the
> Compression/Droop distances. So that my "normal" ride gives me more
> travel in compression (currently 3" compress/7" droop).
>
> I know that this may stiffen the ride too much, but I just want to try
> it before I start carving into the body. Drilling holes in it, I have no
> problem with. I did some major fender well cutting on my Silverado to
> handle 33" Swampers, and I'll do it to the Jeep, but I'd rather keep it
> as a last resort.
>
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > serg wrote:
> >
> >>nice work man! those new tires look soooo huge compared to the 31's!!
must
> >>be nice to have a shop to work in. i have access to a shop too but only
the
> >>tools-sure makes it nice to at least have that though!
> >>damn-if i lived down south i'd definitely go check it out...
>
well trimming, giving you a couple more inches of room. With those on my
rig (92YJ) along with approx 4.75" SUA suspension lift and 1.25" body lift,
35" MT/R fit with plenty of room. There's room for a 37" set, which will be
on there next time.
Terry.
"Cal Wheeler" <cal@whee.ler> wrote in message
news:bkrcj7$oio$0@pita.alt.net...
> L.W.(ßill) ------ III wrote:
>
> > Looks like Cal will need to radius and tub the fender wells, or be
> > satisfied with two inches of travel:
> > http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
>
> I know. It looks inevitable. I was hoping the SOA would take care of
> most of the lift (and it did), but not enough. This may sound silly, but
> I'm going to install some air springs and try and offset the
> Compression/Droop distances. So that my "normal" ride gives me more
> travel in compression (currently 3" compress/7" droop).
>
> I know that this may stiffen the ride too much, but I just want to try
> it before I start carving into the body. Drilling holes in it, I have no
> problem with. I did some major fender well cutting on my Silverado to
> handle 33" Swampers, and I'll do it to the Jeep, but I'd rather keep it
> as a last resort.
>
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > serg wrote:
> >
> >>nice work man! those new tires look soooo huge compared to the 31's!!
must
> >>be nice to have a shop to work in. i have access to a shop too but only
the
> >>tools-sure makes it nice to at least have that though!
> >>damn-if i lived down south i'd definitely go check it out...
>
09-28-2003, 02:57 AM
#10
Guest
Posts: n/a
Re: Pix are up!
Terry Jeffrey wrote:
> Consider swapping to TJ flares. They'll fit fine with some minor fender
> well trimming, giving you a couple more inches of room. With those on my
> rig (92YJ) along with approx 4.75" SUA suspension lift and 1.25" body lift,
> 35" MT/R fit with plenty of room. There's room for a 37" set, which will be
> on there next time.
>
I probably should have done this. However, I've got the Xenons already,
so I'm going to try and make those work. I've got one side mocked up
already with delrin standoffs. Also, I grindered away about 1 1/2" from
one of the rear wheel wells, and will go ahead and do the others as well.
> Terry.
>
>
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkrcj7$oio$0@pita.alt.net...
>
>>L.W.(ßill) ------ III wrote:
>>
>>
>>> Looks like Cal will need to radius and tub the fender wells, or be
>>>satisfied with two inches of travel:
>>>http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
>>
>>I know. It looks inevitable. I was hoping the SOA would take care of
>>most of the lift (and it did), but not enough. This may sound silly, but
>>I'm going to install some air springs and try and offset the
>>Compression/Droop distances. So that my "normal" ride gives me more
>>travel in compression (currently 3" compress/7" droop).
>>
>>I know that this may stiffen the ride too much, but I just want to try
>>it before I start carving into the body. Drilling holes in it, I have no
>>problem with. I did some major fender well cutting on my Silverado to
>>handle 33" Swampers, and I'll do it to the Jeep, but I'd rather keep it
>>as a last resort.
>>
>>
>>> God Bless America, ßill O|||||||O
>>>mailto:-------------------- http://www.----------.com/
>>>
>>>serg wrote:
>>>
>>>
>>>>nice work man! those new tires look soooo huge compared to the 31's!!
>
> must
>
>>>>be nice to have a shop to work in. i have access to a shop too but only
>
> the
>
>>>>tools-sure makes it nice to at least have that though!
>>>>damn-if i lived down south i'd definitely go check it out...
>>
>
>
>
> Consider swapping to TJ flares. They'll fit fine with some minor fender
> well trimming, giving you a couple more inches of room. With those on my
> rig (92YJ) along with approx 4.75" SUA suspension lift and 1.25" body lift,
> 35" MT/R fit with plenty of room. There's room for a 37" set, which will be
> on there next time.
>
I probably should have done this. However, I've got the Xenons already,
so I'm going to try and make those work. I've got one side mocked up
already with delrin standoffs. Also, I grindered away about 1 1/2" from
one of the rear wheel wells, and will go ahead and do the others as well.
> Terry.
>
>
> "Cal Wheeler" <cal@whee.ler> wrote in message
> news:bkrcj7$oio$0@pita.alt.net...
>
>>L.W.(ßill) ------ III wrote:
>>
>>
>>> Looks like Cal will need to radius and tub the fender wells, or be
>>>satisfied with two inches of travel:
>>>http://pages.sbcglobal.net/calwheele...s/img_1642.jpg
>>
>>I know. It looks inevitable. I was hoping the SOA would take care of
>>most of the lift (and it did), but not enough. This may sound silly, but
>>I'm going to install some air springs and try and offset the
>>Compression/Droop distances. So that my "normal" ride gives me more
>>travel in compression (currently 3" compress/7" droop).
>>
>>I know that this may stiffen the ride too much, but I just want to try
>>it before I start carving into the body. Drilling holes in it, I have no
>>problem with. I did some major fender well cutting on my Silverado to
>>handle 33" Swampers, and I'll do it to the Jeep, but I'd rather keep it
>>as a last resort.
>>
>>
>>> God Bless America, ßill O|||||||O
>>>mailto:-------------------- http://www.----------.com/
>>>
>>>serg wrote:
>>>
>>>
>>>>nice work man! those new tires look soooo huge compared to the 31's!!
>
> must
>
>>>>be nice to have a shop to work in. i have access to a shop too but only
>
> the
>
>>>>tools-sure makes it nice to at least have that though!
>>>>damn-if i lived down south i'd definitely go check it out...
>>
>
>
>