|
Re: How much of a pain to pull the driver door panel on a 95 ZJ Limited?
Lon did pass the time by typing:
> Window motor or mechanism making very slight grumbling noises only when > rolling up, not down. > > How much of a pain in the nose is it to pull the driver door panels off > to get at the thing to see if it is falling apart or just needs a few > shots of lithium grease or similar? Mostly it's enclosed but the track and hinge might need some attention. > I have the FSM, but sometimes they tend to be a bit optimistic. If it's like the 93 then just remove all the screws and slowly pry the panel back. Watch the fingers, that plastic is suprisingly sharp, cut the crap out of myself the first time. Dunno if you have the little peggy things like these http://www.revbeergoggles.com/temp/door-tree.jpg Sometimes they break.. Dealer want's too freaking much for them. I bought a bag of 50 from http://www.thecliplink.com/ DOOR TRIM PANEL RETAINER 18915 1 6.15 (this says Chrysler Caravan, Cirrus, Neon, Stratus & Voyager #6504014 1995-on but it's the same as the Jeep part, just white, not yellow, whaaaah!) JEEP SCREW GROMMET - 25 19276 1 5.33 -- DougW |
Re: How much of a pain to pull the driver door panel on a 95 ZJ Limited?
Thanks will give it a shot. i know it has pop fasteners, dunno if the
type that ger old and hard. If I see them, I might just order a few before I get a round tuit. Just don't want anything busting in the meantime... DougW proclaimed: > Lon did pass the time by typing: > >>Window motor or mechanism making very slight grumbling noises only when >>rolling up, not down. >> >>How much of a pain in the nose is it to pull the driver door panels off >>to get at the thing to see if it is falling apart or just needs a few >>shots of lithium grease or similar? > > > Mostly it's enclosed but the track and hinge might need some attention. > > >>I have the FSM, but sometimes they tend to be a bit optimistic. > > > If it's like the 93 then just remove all the screws and slowly > pry the panel back. Watch the fingers, that plastic is suprisingly > sharp, cut the crap out of myself the first time. > > Dunno if you have the little peggy things like these > http://www.revbeergoggles.com/temp/door-tree.jpg > Sometimes they break.. Dealer want's too freaking much for them. > I bought a bag of 50 from http://www.thecliplink.com/ > > DOOR TRIM PANEL RETAINER 18915 1 6.15 > > (this says Chrysler Caravan, Cirrus, Neon, Stratus & Voyager #6504014 1995-on > but it's the same as the Jeep part, just white, not yellow, whaaaah!) > > JEEP SCREW GROMMET - 25 19276 1 5.33 > |
Re: How much of a pain to pull the driver door panel on a 95 ZJ Limited?
Thanks will give it a shot. i know it has pop fasteners, dunno if the
type that ger old and hard. If I see them, I might just order a few before I get a round tuit. Just don't want anything busting in the meantime... DougW proclaimed: > Lon did pass the time by typing: > >>Window motor or mechanism making very slight grumbling noises only when >>rolling up, not down. >> >>How much of a pain in the nose is it to pull the driver door panels off >>to get at the thing to see if it is falling apart or just needs a few >>shots of lithium grease or similar? > > > Mostly it's enclosed but the track and hinge might need some attention. > > >>I have the FSM, but sometimes they tend to be a bit optimistic. > > > If it's like the 93 then just remove all the screws and slowly > pry the panel back. Watch the fingers, that plastic is suprisingly > sharp, cut the crap out of myself the first time. > > Dunno if you have the little peggy things like these > http://www.revbeergoggles.com/temp/door-tree.jpg > Sometimes they break.. Dealer want's too freaking much for them. > I bought a bag of 50 from http://www.thecliplink.com/ > > DOOR TRIM PANEL RETAINER 18915 1 6.15 > > (this says Chrysler Caravan, Cirrus, Neon, Stratus & Voyager #6504014 1995-on > but it's the same as the Jeep part, just white, not yellow, whaaaah!) > > JEEP SCREW GROMMET - 25 19276 1 5.33 > |
Re: How much of a pain to pull the driver door panel on a 95 ZJ Limited?
Thanks will give it a shot. i know it has pop fasteners, dunno if the
type that ger old and hard. If I see them, I might just order a few before I get a round tuit. Just don't want anything busting in the meantime... DougW proclaimed: > Lon did pass the time by typing: > >>Window motor or mechanism making very slight grumbling noises only when >>rolling up, not down. >> >>How much of a pain in the nose is it to pull the driver door panels off >>to get at the thing to see if it is falling apart or just needs a few >>shots of lithium grease or similar? > > > Mostly it's enclosed but the track and hinge might need some attention. > > >>I have the FSM, but sometimes they tend to be a bit optimistic. > > > If it's like the 93 then just remove all the screws and slowly > pry the panel back. Watch the fingers, that plastic is suprisingly > sharp, cut the crap out of myself the first time. > > Dunno if you have the little peggy things like these > http://www.revbeergoggles.com/temp/door-tree.jpg > Sometimes they break.. Dealer want's too freaking much for them. > I bought a bag of 50 from http://www.thecliplink.com/ > > DOOR TRIM PANEL RETAINER 18915 1 6.15 > > (this says Chrysler Caravan, Cirrus, Neon, Stratus & Voyager #6504014 1995-on > but it's the same as the Jeep part, just white, not yellow, whaaaah!) > > JEEP SCREW GROMMET - 25 19276 1 5.33 > |
Re: How much of a pain to pull the driver door panel on a 95 ZJ Limited?
Lon did pass the time by typing:
> Thanks will give it a shot. i know it has pop fasteners, dunno if the > type that ger old and hard. If I see them, I might just order a few > before I get a round tuit. > > Just don't want anything busting in the meantime... The pegs tend to crack. Then all you get is a bit of squeek from the door panel. thecliplink has a minimum order but I just picked up a few bags of different bits for other folks to make it over 20$ (I think that was the number) -- DougW |
Re: How much of a pain to pull the driver door panel on a 95 ZJ Limited?
Lon did pass the time by typing:
> Thanks will give it a shot. i know it has pop fasteners, dunno if the > type that ger old and hard. If I see them, I might just order a few > before I get a round tuit. > > Just don't want anything busting in the meantime... The pegs tend to crack. Then all you get is a bit of squeek from the door panel. thecliplink has a minimum order but I just picked up a few bags of different bits for other folks to make it over 20$ (I think that was the number) -- DougW |
Re: How much of a pain to pull the driver door panel on a 95 ZJ Limited?
Lon did pass the time by typing:
> Thanks will give it a shot. i know it has pop fasteners, dunno if the > type that ger old and hard. If I see them, I might just order a few > before I get a round tuit. > > Just don't want anything busting in the meantime... The pegs tend to crack. Then all you get is a bit of squeek from the door panel. thecliplink has a minimum order but I just picked up a few bags of different bits for other folks to make it over 20$ (I think that was the number) -- DougW |
| All times are GMT -4. The time now is 06:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands