Re: Ford 9inch read axle
Guest
Posts: n/a
Re: Ford 9inch read axle
Thanks Bill -- this will make it easy for me to determine!
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:406B7B69.9E22259C@***.net...
> Hi Bill,
> A Nine inch uses a third member that can be easily removed from the
> pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
> The eight inch will have a cover plate like this Vicky:
>
http://www.nhtsa.dot.gov/cars/proble...s/image003.gif
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Morrissey wrote:
> >
> > I have not yet seen it, but was told by the owner it was a 9 inch. What
is
> > the easiest way to confirm it is a 9 inch?
> >
> > Bill
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:406B7B69.9E22259C@***.net...
> Hi Bill,
> A Nine inch uses a third member that can be easily removed from the
> pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
> The eight inch will have a cover plate like this Vicky:
>
http://www.nhtsa.dot.gov/cars/proble...s/image003.gif
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Morrissey wrote:
> >
> > I have not yet seen it, but was told by the owner it was a 9 inch. What
is
> > the easiest way to confirm it is a 9 inch?
> >
> > Bill
Guest
Posts: n/a
Re: Ford 9inch read axle
Thanks Bill -- this will make it easy for me to determine!
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:406B7B69.9E22259C@***.net...
> Hi Bill,
> A Nine inch uses a third member that can be easily removed from the
> pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
> The eight inch will have a cover plate like this Vicky:
>
http://www.nhtsa.dot.gov/cars/proble...s/image003.gif
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Morrissey wrote:
> >
> > I have not yet seen it, but was told by the owner it was a 9 inch. What
is
> > the easiest way to confirm it is a 9 inch?
> >
> > Bill
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:406B7B69.9E22259C@***.net...
> Hi Bill,
> A Nine inch uses a third member that can be easily removed from the
> pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
> The eight inch will have a cover plate like this Vicky:
>
http://www.nhtsa.dot.gov/cars/proble...s/image003.gif
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Morrissey wrote:
> >
> > I have not yet seen it, but was told by the owner it was a 9 inch. What
is
> > the easiest way to confirm it is a 9 inch?
> >
> > Bill
Guest
Posts: n/a
Re: Ford 9inch read axle
Thanks Bill -- this will make it easy for me to determine!
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:406B7B69.9E22259C@***.net...
> Hi Bill,
> A Nine inch uses a third member that can be easily removed from the
> pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
> The eight inch will have a cover plate like this Vicky:
>
http://www.nhtsa.dot.gov/cars/proble...s/image003.gif
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Morrissey wrote:
> >
> > I have not yet seen it, but was told by the owner it was a 9 inch. What
is
> > the easiest way to confirm it is a 9 inch?
> >
> > Bill
Bill
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:406B7B69.9E22259C@***.net...
> Hi Bill,
> A Nine inch uses a third member that can be easily removed from the
> pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
> The eight inch will have a cover plate like this Vicky:
>
http://www.nhtsa.dot.gov/cars/proble...s/image003.gif
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Morrissey wrote:
> >
> > I have not yet seen it, but was told by the owner it was a 9 inch. What
is
> > the easiest way to confirm it is a 9 inch?
> >
> > Bill
Guest
Posts: n/a
Re: Ford 9inch read axle
In article <406B7B69.9E22259C@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
> A Nine inch uses a third member that can be easily removed from the
>pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
>The eight inch will have a cover plate like this Vicky:
>
>http://www.nhtsa.dot.gov/cars/proble...ex_files/image
003.gif
>
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Morrissey wrote:
>>
>> I have not yet seen it, but was told by the owner it was a 9 inch. What is
>> the easiest way to confirm it is a 9 inch?
>>
>> Bill
If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
have one...
http://home.triad.rr.com/redsled
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
"We must not confuse dissent with disloyalty." -Edward R. Murrow
III <----------@***.net> writes:
> A Nine inch uses a third member that can be easily removed from the
>pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
>The eight inch will have a cover plate like this Vicky:
>
>http://www.nhtsa.dot.gov/cars/proble...ex_files/image
003.gif
>
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Morrissey wrote:
>>
>> I have not yet seen it, but was told by the owner it was a 9 inch. What is
>> the easiest way to confirm it is a 9 inch?
>>
>> Bill
If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
have one...
http://home.triad.rr.com/redsled
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
"We must not confuse dissent with disloyalty." -Edward R. Murrow
Guest
Posts: n/a
Re: Ford 9inch read axle
In article <406B7B69.9E22259C@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
> A Nine inch uses a third member that can be easily removed from the
>pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
>The eight inch will have a cover plate like this Vicky:
>
>http://www.nhtsa.dot.gov/cars/proble...ex_files/image
003.gif
>
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Morrissey wrote:
>>
>> I have not yet seen it, but was told by the owner it was a 9 inch. What is
>> the easiest way to confirm it is a 9 inch?
>>
>> Bill
If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
have one...
http://home.triad.rr.com/redsled
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
"We must not confuse dissent with disloyalty." -Edward R. Murrow
III <----------@***.net> writes:
> A Nine inch uses a third member that can be easily removed from the
>pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
>The eight inch will have a cover plate like this Vicky:
>
>http://www.nhtsa.dot.gov/cars/proble...ex_files/image
003.gif
>
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Morrissey wrote:
>>
>> I have not yet seen it, but was told by the owner it was a 9 inch. What is
>> the easiest way to confirm it is a 9 inch?
>>
>> Bill
If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
have one...
http://home.triad.rr.com/redsled
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
"We must not confuse dissent with disloyalty." -Edward R. Murrow
Guest
Posts: n/a
Re: Ford 9inch read axle
In article <406B7B69.9E22259C@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
> A Nine inch uses a third member that can be easily removed from the
>pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
>The eight inch will have a cover plate like this Vicky:
>
>http://www.nhtsa.dot.gov/cars/proble...ex_files/image
003.gif
>
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Morrissey wrote:
>>
>> I have not yet seen it, but was told by the owner it was a 9 inch. What is
>> the easiest way to confirm it is a 9 inch?
>>
>> Bill
If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
have one...
http://home.triad.rr.com/redsled
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
"We must not confuse dissent with disloyalty." -Edward R. Murrow
III <----------@***.net> writes:
> A Nine inch uses a third member that can be easily removed from the
>pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
>The eight inch will have a cover plate like this Vicky:
>
>http://www.nhtsa.dot.gov/cars/proble...ex_files/image
003.gif
>
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Morrissey wrote:
>>
>> I have not yet seen it, but was told by the owner it was a 9 inch. What is
>> the easiest way to confirm it is a 9 inch?
>>
>> Bill
If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
have one...
http://home.triad.rr.com/redsled
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
"We must not confuse dissent with disloyalty." -Edward R. Murrow
Guest
Posts: n/a
Re: Ford 9inch read axle
In article <406B7B69.9E22259C@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
> A Nine inch uses a third member that can be easily removed from the
>pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
>The eight inch will have a cover plate like this Vicky:
>
>http://www.nhtsa.dot.gov/cars/proble...ex_files/image
003.gif
>
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Morrissey wrote:
>>
>> I have not yet seen it, but was told by the owner it was a 9 inch. What is
>> the easiest way to confirm it is a 9 inch?
>>
>> Bill
If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
have one...
http://home.triad.rr.com/redsled
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
"We must not confuse dissent with disloyalty." -Edward R. Murrow
III <----------@***.net> writes:
> A Nine inch uses a third member that can be easily removed from the
>pumpkin whole to change ratios: http://www.kevinstang.com/Ninecase.htm
>The eight inch will have a cover plate like this Vicky:
>
>http://www.nhtsa.dot.gov/cars/proble...ex_files/image
003.gif
>
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Morrissey wrote:
>>
>> I have not yet seen it, but was told by the owner it was a 9 inch. What is
>> the easiest way to confirm it is a 9 inch?
>>
>> Bill
If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
have one...
http://home.triad.rr.com/redsled
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
"We must not confuse dissent with disloyalty." -Edward R. Murrow
Guest
Posts: n/a
Re: Ford 9inch read axle
That's a pretty car, he just needs one of these:
http://www.----------.com/8track.jpg ;-)
God Bless America, ßill O|||||||O
mailto:--------------------
Matt Macchiarolo wrote:
>
> If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
> the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
> have one...
>
> http://home.triad.rr.com/redsled
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> "We must not confuse dissent with disloyalty." -Edward R. Murrow
http://www.----------.com/8track.jpg ;-)
God Bless America, ßill O|||||||O
mailto:--------------------
Matt Macchiarolo wrote:
>
> If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
> the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
> have one...
>
> http://home.triad.rr.com/redsled
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> "We must not confuse dissent with disloyalty." -Edward R. Murrow
Guest
Posts: n/a
Re: Ford 9inch read axle
That's a pretty car, he just needs one of these:
http://www.----------.com/8track.jpg ;-)
God Bless America, ßill O|||||||O
mailto:--------------------
Matt Macchiarolo wrote:
>
> If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
> the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
> have one...
>
> http://home.triad.rr.com/redsled
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> "We must not confuse dissent with disloyalty." -Edward R. Murrow
http://www.----------.com/8track.jpg ;-)
God Bless America, ßill O|||||||O
mailto:--------------------
Matt Macchiarolo wrote:
>
> If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
> the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
> have one...
>
> http://home.triad.rr.com/redsled
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> "We must not confuse dissent with disloyalty." -Edward R. Murrow
Guest
Posts: n/a
Re: Ford 9inch read axle
That's a pretty car, he just needs one of these:
http://www.----------.com/8track.jpg ;-)
God Bless America, ßill O|||||||O
mailto:--------------------
Matt Macchiarolo wrote:
>
> If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
> the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
> have one...
>
> http://home.triad.rr.com/redsled
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> "We must not confuse dissent with disloyalty." -Edward R. Murrow
http://www.----------.com/8track.jpg ;-)
God Bless America, ßill O|||||||O
mailto:--------------------
Matt Macchiarolo wrote:
>
> If memory serves, my dad's '81 Grand Marquis did not have a 9", so most likely
> the '89 Crown Vic would not have had one as well. My brother's '70 Torino does
> have one...
>
> http://home.triad.rr.com/redsled
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> "We must not confuse dissent with disloyalty." -Edward R. Murrow
