Re-doing wheels___again!
Guest
Posts: n/a
Re-doing wheels___again!
I'm another one___'97 Sport with the wheel upgrade, polished alum.,
clearcoated. After 5 years on the beach everyday they look like "hell".
Not only is the CC peeling off, the metal is corroding fiercely. (I'm
experienced in the effect of salt air on bare alum.) I'm told there is a
Clear Coat remover that does "pretty well" but entails more work and time
that I want to expend on an "iffy" result. Any suggestions appreciated!!
Also where is this "Wheel Paint Kit" available?
Thanks___CHJ
clearcoated. After 5 years on the beach everyday they look like "hell".
Not only is the CC peeling off, the metal is corroding fiercely. (I'm
experienced in the effect of salt air on bare alum.) I'm told there is a
Clear Coat remover that does "pretty well" but entails more work and time
that I want to expend on an "iffy" result. Any suggestions appreciated!!
Also where is this "Wheel Paint Kit" available?
Thanks___CHJ
Guest
Posts: n/a
Re: Re-doing wheels___again!
Paint is paint (to a point). The preparation is critical with clear only
wheels due to the clarity of the pretreatment.
The OEM process is to Clean/ Chrome sealer/ powder coating with either
acrylic or polyester clear/ Bake.
There are companies that will remachine and powder coat. There is one in
Huntington Indian but the name escapes me but all the wheel parts companies
send there wheels there.....
Tom
"chj" <chj@techline.com> wrote in message
news:1015i9faerk995c@corp.supernews.com...
> I'm another one___'97 Sport with the wheel upgrade, polished alum.,
> clearcoated. After 5 years on the beach everyday they look like "hell".
> Not only is the CC peeling off, the metal is corroding fiercely. (I'm
> experienced in the effect of salt air on bare alum.) I'm told there is a
> Clear Coat remover that does "pretty well" but entails more work and time
> that I want to expend on an "iffy" result. Any suggestions appreciated!!
> Also where is this "Wheel Paint Kit" available?
> Thanks___CHJ
>
>
wheels due to the clarity of the pretreatment.
The OEM process is to Clean/ Chrome sealer/ powder coating with either
acrylic or polyester clear/ Bake.
There are companies that will remachine and powder coat. There is one in
Huntington Indian but the name escapes me but all the wheel parts companies
send there wheels there.....
Tom
"chj" <chj@techline.com> wrote in message
news:1015i9faerk995c@corp.supernews.com...
> I'm another one___'97 Sport with the wheel upgrade, polished alum.,
> clearcoated. After 5 years on the beach everyday they look like "hell".
> Not only is the CC peeling off, the metal is corroding fiercely. (I'm
> experienced in the effect of salt air on bare alum.) I'm told there is a
> Clear Coat remover that does "pretty well" but entails more work and time
> that I want to expend on an "iffy" result. Any suggestions appreciated!!
> Also where is this "Wheel Paint Kit" available?
> Thanks___CHJ
>
>
Guest
Posts: n/a
Re: Re-doing wheels___again!
Paint is paint (to a point). The preparation is critical with clear only
wheels due to the clarity of the pretreatment.
The OEM process is to Clean/ Chrome sealer/ powder coating with either
acrylic or polyester clear/ Bake.
There are companies that will remachine and powder coat. There is one in
Huntington Indian but the name escapes me but all the wheel parts companies
send there wheels there.....
Tom
"chj" <chj@techline.com> wrote in message
news:1015i9faerk995c@corp.supernews.com...
> I'm another one___'97 Sport with the wheel upgrade, polished alum.,
> clearcoated. After 5 years on the beach everyday they look like "hell".
> Not only is the CC peeling off, the metal is corroding fiercely. (I'm
> experienced in the effect of salt air on bare alum.) I'm told there is a
> Clear Coat remover that does "pretty well" but entails more work and time
> that I want to expend on an "iffy" result. Any suggestions appreciated!!
> Also where is this "Wheel Paint Kit" available?
> Thanks___CHJ
>
>
wheels due to the clarity of the pretreatment.
The OEM process is to Clean/ Chrome sealer/ powder coating with either
acrylic or polyester clear/ Bake.
There are companies that will remachine and powder coat. There is one in
Huntington Indian but the name escapes me but all the wheel parts companies
send there wheels there.....
Tom
"chj" <chj@techline.com> wrote in message
news:1015i9faerk995c@corp.supernews.com...
> I'm another one___'97 Sport with the wheel upgrade, polished alum.,
> clearcoated. After 5 years on the beach everyday they look like "hell".
> Not only is the CC peeling off, the metal is corroding fiercely. (I'm
> experienced in the effect of salt air on bare alum.) I'm told there is a
> Clear Coat remover that does "pretty well" but entails more work and time
> that I want to expend on an "iffy" result. Any suggestions appreciated!!
> Also where is this "Wheel Paint Kit" available?
> Thanks___CHJ
>
>
Guest
Posts: n/a
Re: Re-doing wheels___again!
Paint is paint (to a point). The preparation is critical with clear only
wheels due to the clarity of the pretreatment.
The OEM process is to Clean/ Chrome sealer/ powder coating with either
acrylic or polyester clear/ Bake.
There are companies that will remachine and powder coat. There is one in
Huntington Indian but the name escapes me but all the wheel parts companies
send there wheels there.....
Tom
"chj" <chj@techline.com> wrote in message
news:1015i9faerk995c@corp.supernews.com...
> I'm another one___'97 Sport with the wheel upgrade, polished alum.,
> clearcoated. After 5 years on the beach everyday they look like "hell".
> Not only is the CC peeling off, the metal is corroding fiercely. (I'm
> experienced in the effect of salt air on bare alum.) I'm told there is a
> Clear Coat remover that does "pretty well" but entails more work and time
> that I want to expend on an "iffy" result. Any suggestions appreciated!!
> Also where is this "Wheel Paint Kit" available?
> Thanks___CHJ
>
>
wheels due to the clarity of the pretreatment.
The OEM process is to Clean/ Chrome sealer/ powder coating with either
acrylic or polyester clear/ Bake.
There are companies that will remachine and powder coat. There is one in
Huntington Indian but the name escapes me but all the wheel parts companies
send there wheels there.....
Tom
"chj" <chj@techline.com> wrote in message
news:1015i9faerk995c@corp.supernews.com...
> I'm another one___'97 Sport with the wheel upgrade, polished alum.,
> clearcoated. After 5 years on the beach everyday they look like "hell".
> Not only is the CC peeling off, the metal is corroding fiercely. (I'm
> experienced in the effect of salt air on bare alum.) I'm told there is a
> Clear Coat remover that does "pretty well" but entails more work and time
> that I want to expend on an "iffy" result. Any suggestions appreciated!!
> Also where is this "Wheel Paint Kit" available?
> Thanks___CHJ
>
>
Guest
Posts: n/a
Re: Re-doing wheels___again!
If your a do it yourselfer & I think you are, here is an article to give
some insight on polishing aluminum
http://www.cbxclub.com/davespage/mcy84-1.html
& a good company to get supplies from is Eastwood
http://www.eastwoodco.com/email/defa...47&SKW=buffing
Check them out but you might do just as well depending on your location with
a local source.
L8r - Jersey
"chj" <chj@techline.com> wrote in message
news:1015i9faerk995c@corp.supernews.com...
> I'm another one___'97 Sport with the wheel upgrade, polished alum.,
> clearcoated. After 5 years on the beach everyday they look like "hell".
> Not only is the CC peeling off, the metal is corroding fiercely. (I'm
> experienced in the effect of salt air on bare alum.) I'm told there is a
> Clear Coat remover that does "pretty well" but entails more work and time
> that I want to expend on an "iffy" result. Any suggestions appreciated!!
> Also where is this "Wheel Paint Kit" available?
> Thanks___CHJ
>
>
some insight on polishing aluminum
http://www.cbxclub.com/davespage/mcy84-1.html
& a good company to get supplies from is Eastwood
http://www.eastwoodco.com/email/defa...47&SKW=buffing
Check them out but you might do just as well depending on your location with
a local source.
L8r - Jersey
"chj" <chj@techline.com> wrote in message
news:1015i9faerk995c@corp.supernews.com...
> I'm another one___'97 Sport with the wheel upgrade, polished alum.,
> clearcoated. After 5 years on the beach everyday they look like "hell".
> Not only is the CC peeling off, the metal is corroding fiercely. (I'm
> experienced in the effect of salt air on bare alum.) I'm told there is a
> Clear Coat remover that does "pretty well" but entails more work and time
> that I want to expend on an "iffy" result. Any suggestions appreciated!!
> Also where is this "Wheel Paint Kit" available?
> Thanks___CHJ
>
>
Guest
Posts: n/a
Re: Re-doing wheels___again!
If your a do it yourselfer & I think you are, here is an article to give
some insight on polishing aluminum
http://www.cbxclub.com/davespage/mcy84-1.html
& a good company to get supplies from is Eastwood
http://www.eastwoodco.com/email/defa...47&SKW=buffing
Check them out but you might do just as well depending on your location with
a local source.
L8r - Jersey
"chj" <chj@techline.com> wrote in message
news:1015i9faerk995c@corp.supernews.com...
> I'm another one___'97 Sport with the wheel upgrade, polished alum.,
> clearcoated. After 5 years on the beach everyday they look like "hell".
> Not only is the CC peeling off, the metal is corroding fiercely. (I'm
> experienced in the effect of salt air on bare alum.) I'm told there is a
> Clear Coat remover that does "pretty well" but entails more work and time
> that I want to expend on an "iffy" result. Any suggestions appreciated!!
> Also where is this "Wheel Paint Kit" available?
> Thanks___CHJ
>
>
some insight on polishing aluminum
http://www.cbxclub.com/davespage/mcy84-1.html
& a good company to get supplies from is Eastwood
http://www.eastwoodco.com/email/defa...47&SKW=buffing
Check them out but you might do just as well depending on your location with
a local source.
L8r - Jersey
"chj" <chj@techline.com> wrote in message
news:1015i9faerk995c@corp.supernews.com...
> I'm another one___'97 Sport with the wheel upgrade, polished alum.,
> clearcoated. After 5 years on the beach everyday they look like "hell".
> Not only is the CC peeling off, the metal is corroding fiercely. (I'm
> experienced in the effect of salt air on bare alum.) I'm told there is a
> Clear Coat remover that does "pretty well" but entails more work and time
> that I want to expend on an "iffy" result. Any suggestions appreciated!!
> Also where is this "Wheel Paint Kit" available?
> Thanks___CHJ
>
>
Guest
Posts: n/a
Re: Re-doing wheels___again!
If your a do it yourselfer & I think you are, here is an article to give
some insight on polishing aluminum
http://www.cbxclub.com/davespage/mcy84-1.html
& a good company to get supplies from is Eastwood
http://www.eastwoodco.com/email/defa...47&SKW=buffing
Check them out but you might do just as well depending on your location with
a local source.
L8r - Jersey
"chj" <chj@techline.com> wrote in message
news:1015i9faerk995c@corp.supernews.com...
> I'm another one___'97 Sport with the wheel upgrade, polished alum.,
> clearcoated. After 5 years on the beach everyday they look like "hell".
> Not only is the CC peeling off, the metal is corroding fiercely. (I'm
> experienced in the effect of salt air on bare alum.) I'm told there is a
> Clear Coat remover that does "pretty well" but entails more work and time
> that I want to expend on an "iffy" result. Any suggestions appreciated!!
> Also where is this "Wheel Paint Kit" available?
> Thanks___CHJ
>
>
some insight on polishing aluminum
http://www.cbxclub.com/davespage/mcy84-1.html
& a good company to get supplies from is Eastwood
http://www.eastwoodco.com/email/defa...47&SKW=buffing
Check them out but you might do just as well depending on your location with
a local source.
L8r - Jersey
"chj" <chj@techline.com> wrote in message
news:1015i9faerk995c@corp.supernews.com...
> I'm another one___'97 Sport with the wheel upgrade, polished alum.,
> clearcoated. After 5 years on the beach everyday they look like "hell".
> Not only is the CC peeling off, the metal is corroding fiercely. (I'm
> experienced in the effect of salt air on bare alum.) I'm told there is a
> Clear Coat remover that does "pretty well" but entails more work and time
> that I want to expend on an "iffy" result. Any suggestions appreciated!!
> Also where is this "Wheel Paint Kit" available?
> Thanks___CHJ
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Just Taylor
Jeep Mailing List
2
Aug 18, 2003 08:19 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
