Re: 98 ZJ Oil Pressure
#1
Guest
Posts: n/a
Re: 98 ZJ Oil Pressure
I forgot to mention you should unplug and replug the sensor wiring a few
times as a bit of corrosion may be affecting the connection. Use contact
cleaner if you have it, WD40 will work somewhat.
"billy ray" <billy_ray@fuseSPAM.net> wrote in message news:...
> Before you start replacing any parts temporarily install a mechanical
> gauge and see what the real pressure is.
>
> "Steve Landis" <sdotlandis@comcastdotnet> wrote in message
> news:SZydnfuUbvQN0QHenZ2dnUVZ_sydnZ2d@comcast.com. ..
>> Never really gets to a solid 40 psi. What to check? I'm guessing sending
>> unit first. Anything else?
>> TIA
>>
>> Steve
>> 95 YJ
>> 98 ZJ
>> 00 XJ
>
>
times as a bit of corrosion may be affecting the connection. Use contact
cleaner if you have it, WD40 will work somewhat.
"billy ray" <billy_ray@fuseSPAM.net> wrote in message news:...
> Before you start replacing any parts temporarily install a mechanical
> gauge and see what the real pressure is.
>
> "Steve Landis" <sdotlandis@comcastdotnet> wrote in message
> news:SZydnfuUbvQN0QHenZ2dnUVZ_sydnZ2d@comcast.com. ..
>> Never really gets to a solid 40 psi. What to check? I'm guessing sending
>> unit first. Anything else?
>> TIA
>>
>> Steve
>> 95 YJ
>> 98 ZJ
>> 00 XJ
>
>
Thread
Thread Starter
Forum
Replies
Last Post
mmiller
Jeep Mailing List
10
12-11-2008 11:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)