Rattling 4x4 shift lever on 99TJ??
04-30-2004, 07:09 AM
#1
Guest
Posts: n/a
Rattling 4x4 shift lever on 99TJ??
Hello Group
A Friend who owns a 99TJ 4.0L
is complaining of the 4X4 lever rattling while driving
down a paved road. Stops rattling when pushing on it.
He's ready to remove the skid plate...etc to find the cause.
I thought I'd ask this well informed group if anyone else
experienced this and found a remedy.
Thanks in advance
Regards
Frank
A Friend who owns a 99TJ 4.0L
is complaining of the 4X4 lever rattling while driving
down a paved road. Stops rattling when pushing on it.
He's ready to remove the skid plate...etc to find the cause.
I thought I'd ask this well informed group if anyone else
experienced this and found a remedy.
Thanks in advance
Regards
Frank
04-30-2004, 08:09 AM
#2
Guest
Posts: n/a
Re: Rattling 4x4 shift lever on 99TJ??
It might just need a linkage adjustment, which can be done underneath the
Jeep without removing the skidplate. Loosen the set screw on the linkage,
adjust the position and re-tighten.
--
Matt Macchiarolo
mlmacchiarolo at comcast dot net
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:4rKdnejHwuBQrg_d4p2dnA@magma.ca...
> Hello Group
> A Friend who owns a 99TJ 4.0L
> is complaining of the 4X4 lever rattling while driving
> down a paved road. Stops rattling when pushing on it.
> He's ready to remove the skid plate...etc to find the cause.
> I thought I'd ask this well informed group if anyone else
> experienced this and found a remedy.
> Thanks in advance
> Regards
> Frank
>
Jeep without removing the skidplate. Loosen the set screw on the linkage,
adjust the position and re-tighten.
--
Matt Macchiarolo
mlmacchiarolo at comcast dot net
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:4rKdnejHwuBQrg_d4p2dnA@magma.ca...
> Hello Group
> A Friend who owns a 99TJ 4.0L
> is complaining of the 4X4 lever rattling while driving
> down a paved road. Stops rattling when pushing on it.
> He's ready to remove the skid plate...etc to find the cause.
> I thought I'd ask this well informed group if anyone else
> experienced this and found a remedy.
> Thanks in advance
> Regards
> Frank
>
04-30-2004, 08:09 AM
#3
Guest
Posts: n/a
Re: Rattling 4x4 shift lever on 99TJ??
It might just need a linkage adjustment, which can be done underneath the
Jeep without removing the skidplate. Loosen the set screw on the linkage,
adjust the position and re-tighten.
--
Matt Macchiarolo
mlmacchiarolo at comcast dot net
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:4rKdnejHwuBQrg_d4p2dnA@magma.ca...
> Hello Group
> A Friend who owns a 99TJ 4.0L
> is complaining of the 4X4 lever rattling while driving
> down a paved road. Stops rattling when pushing on it.
> He's ready to remove the skid plate...etc to find the cause.
> I thought I'd ask this well informed group if anyone else
> experienced this and found a remedy.
> Thanks in advance
> Regards
> Frank
>
Jeep without removing the skidplate. Loosen the set screw on the linkage,
adjust the position and re-tighten.
--
Matt Macchiarolo
mlmacchiarolo at comcast dot net
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:4rKdnejHwuBQrg_d4p2dnA@magma.ca...
> Hello Group
> A Friend who owns a 99TJ 4.0L
> is complaining of the 4X4 lever rattling while driving
> down a paved road. Stops rattling when pushing on it.
> He's ready to remove the skid plate...etc to find the cause.
> I thought I'd ask this well informed group if anyone else
> experienced this and found a remedy.
> Thanks in advance
> Regards
> Frank
>
04-30-2004, 08:09 AM
#4
Guest
Posts: n/a
Re: Rattling 4x4 shift lever on 99TJ??
It might just need a linkage adjustment, which can be done underneath the
Jeep without removing the skidplate. Loosen the set screw on the linkage,
adjust the position and re-tighten.
--
Matt Macchiarolo
mlmacchiarolo at comcast dot net
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:4rKdnejHwuBQrg_d4p2dnA@magma.ca...
> Hello Group
> A Friend who owns a 99TJ 4.0L
> is complaining of the 4X4 lever rattling while driving
> down a paved road. Stops rattling when pushing on it.
> He's ready to remove the skid plate...etc to find the cause.
> I thought I'd ask this well informed group if anyone else
> experienced this and found a remedy.
> Thanks in advance
> Regards
> Frank
>
Jeep without removing the skidplate. Loosen the set screw on the linkage,
adjust the position and re-tighten.
--
Matt Macchiarolo
mlmacchiarolo at comcast dot net
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:4rKdnejHwuBQrg_d4p2dnA@magma.ca...
> Hello Group
> A Friend who owns a 99TJ 4.0L
> is complaining of the 4X4 lever rattling while driving
> down a paved road. Stops rattling when pushing on it.
> He's ready to remove the skid plate...etc to find the cause.
> I thought I'd ask this well informed group if anyone else
> experienced this and found a remedy.
> Thanks in advance
> Regards
> Frank
>
04-30-2004, 08:09 AM
#5
Guest
Posts: n/a
Re: Rattling 4x4 shift lever on 99TJ??
It might just need a linkage adjustment, which can be done underneath the
Jeep without removing the skidplate. Loosen the set screw on the linkage,
adjust the position and re-tighten.
--
Matt Macchiarolo
mlmacchiarolo at comcast dot net
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:4rKdnejHwuBQrg_d4p2dnA@magma.ca...
> Hello Group
> A Friend who owns a 99TJ 4.0L
> is complaining of the 4X4 lever rattling while driving
> down a paved road. Stops rattling when pushing on it.
> He's ready to remove the skid plate...etc to find the cause.
> I thought I'd ask this well informed group if anyone else
> experienced this and found a remedy.
> Thanks in advance
> Regards
> Frank
>
Jeep without removing the skidplate. Loosen the set screw on the linkage,
adjust the position and re-tighten.
--
Matt Macchiarolo
mlmacchiarolo at comcast dot net
"FrankW" <fworm@mxznorpak.ca> wrote in message
news:4rKdnejHwuBQrg_d4p2dnA@magma.ca...
> Hello Group
> A Friend who owns a 99TJ 4.0L
> is complaining of the 4X4 lever rattling while driving
> down a paved road. Stops rattling when pushing on it.
> He's ready to remove the skid plate...etc to find the cause.
> I thought I'd ask this well informed group if anyone else
> experienced this and found a remedy.
> Thanks in advance
> Regards
> Frank
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
