cowboy67

Howdy all,

I bought a radiator online for my 1988 Jeep Comanche
Pioneer(Olympic), part number 78. When I received it, it looks
similar, but is not the same. The issue is, the one currently
installed has a 90 degree elbow with a radiator cap.

The one purchased does not have this.

My question, what is the radiator part number for one that would
work.

VIN: 1JTML65POJT119182

Thanks in advance!!

Jim

Will Honea

cowboy67 wrote:

> Howdy all,
>
> I bought a radiator online for my 1988 Jeep Comanche
> Pioneer(Olympic), part number 78. When I received it, it looks
> similar, but is not the same. The issue is, the one currently
> installed has a 90 degree elbow with a radiator cap.
>
> The one purchased does not have this.
>
> My question, what is the radiator part number for one that would
> work.
>
> VIN: 1JTML65POJT119182
>
> Thanks in advance!!

I have the same ride and I can tell you for sure that someone has replaced
the radiator - the original was a closed system and the fill cap was on the
pressure bottle on the firewall. I will be happily making that same mod if
the original radiator in mine will ever give up and die - but it just keeps
chugging as it nudges 200k miles.

Best bet would be to look at a 91+ XJ part, but I'm no expert on this one
since I haven't had to do it yet. Quick and easy way would be a trip to
the bone yard with a camera and a tape measure looking for a 91+ XJ with
the radiator still in it for comparison.

You might also try an old-fashioned radiator shop - they used to carry the
replacement tops for repairing radiators back before everything became a
throw-away.

As it stands, what you have won't work w/o reversing the mods someone made -
not a good plan.

--
Will Honea

--
Posted via a free Usenet account from http://www.teranews.com

merrill

Jim, I agree with Will

I have 2 late 91 XJs. They have the filler.

I put the same rad in my 87 XJ with a closed system and never
regretted it. Much easier to fill, burp and flush than the closed
system.

Someone has obviously converted your 88 to a better rad. Did this
person convert to an open system and get rid of all the closed system
hardware?

I suggest you return the rad and get the rad with a filler tube. You
won't regret it.

Merrill

On Jan 20, 10:08 pm, cowboy67 <cowboy67...@yahoo.com> wrote:
> Howdy all,
>
> I bought a radiator online for my 1988 Jeep Comanche
> Pioneer(Olympic), part number 78. When I received it, it looks
> similar, but is not the same. The issue is, the one currently
> installed has a 90 degree elbow with a radiator cap.
>
> The one purchased does not have this.
>
> My question, what is the radiator part number for one that would
> work.
>
> VIN: 1JTML65POJT119182
>
> Thanks in advance!!
>
> Jim