Radiator mount 86 CJ
#2
Guest
Posts: n/a
Re: Radiator mount 86 CJ
I have a couple new stock mounts kicking around, that is the one with
the smaller hole isn't it? If no one else has the size, I can look in
the garage tomorrow and give you a measurement. It isn't very thick if
I remember right. Maybe 5/8"??
I didn't end up using mine. The bottom edge of my chrome Laredo grill
insert is level with my one piece front clip's bottom edge and I had to
put that edge 1 3/8" above the frame rails to have the hood sit level
and in line with the body's flow.
I used two levels, one in the body and on the body's back rails and one
on the hood's or clip's top and kept shimming until I got it right, then
made a mount for it the right size.
Only 4 of the other stock mounts didn't need shims to fit my 'glass tub
either.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
TwoTracker wrote:
>
> Does anyone know the proper spacing for the radiator mount on an '86 CJ7 ?
> I am reassembling the front end and I have my choice of hockey pucks, hard
> plastic octagon support or mounting material that can be cut to length.
>
> Thanks!
the smaller hole isn't it? If no one else has the size, I can look in
the garage tomorrow and give you a measurement. It isn't very thick if
I remember right. Maybe 5/8"??
I didn't end up using mine. The bottom edge of my chrome Laredo grill
insert is level with my one piece front clip's bottom edge and I had to
put that edge 1 3/8" above the frame rails to have the hood sit level
and in line with the body's flow.
I used two levels, one in the body and on the body's back rails and one
on the hood's or clip's top and kept shimming until I got it right, then
made a mount for it the right size.
Only 4 of the other stock mounts didn't need shims to fit my 'glass tub
either.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
TwoTracker wrote:
>
> Does anyone know the proper spacing for the radiator mount on an '86 CJ7 ?
> I am reassembling the front end and I have my choice of hockey pucks, hard
> plastic octagon support or mounting material that can be cut to length.
>
> Thanks!
#3
Guest
Posts: n/a
Re: Radiator mount 86 CJ
I have a couple new stock mounts kicking around, that is the one with
the smaller hole isn't it? If no one else has the size, I can look in
the garage tomorrow and give you a measurement. It isn't very thick if
I remember right. Maybe 5/8"??
I didn't end up using mine. The bottom edge of my chrome Laredo grill
insert is level with my one piece front clip's bottom edge and I had to
put that edge 1 3/8" above the frame rails to have the hood sit level
and in line with the body's flow.
I used two levels, one in the body and on the body's back rails and one
on the hood's or clip's top and kept shimming until I got it right, then
made a mount for it the right size.
Only 4 of the other stock mounts didn't need shims to fit my 'glass tub
either.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
TwoTracker wrote:
>
> Does anyone know the proper spacing for the radiator mount on an '86 CJ7 ?
> I am reassembling the front end and I have my choice of hockey pucks, hard
> plastic octagon support or mounting material that can be cut to length.
>
> Thanks!
the smaller hole isn't it? If no one else has the size, I can look in
the garage tomorrow and give you a measurement. It isn't very thick if
I remember right. Maybe 5/8"??
I didn't end up using mine. The bottom edge of my chrome Laredo grill
insert is level with my one piece front clip's bottom edge and I had to
put that edge 1 3/8" above the frame rails to have the hood sit level
and in line with the body's flow.
I used two levels, one in the body and on the body's back rails and one
on the hood's or clip's top and kept shimming until I got it right, then
made a mount for it the right size.
Only 4 of the other stock mounts didn't need shims to fit my 'glass tub
either.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
TwoTracker wrote:
>
> Does anyone know the proper spacing for the radiator mount on an '86 CJ7 ?
> I am reassembling the front end and I have my choice of hockey pucks, hard
> plastic octagon support or mounting material that can be cut to length.
>
> Thanks!
#4
Guest
Posts: n/a
Re: Radiator mount 86 CJ
I have a couple new stock mounts kicking around, that is the one with
the smaller hole isn't it? If no one else has the size, I can look in
the garage tomorrow and give you a measurement. It isn't very thick if
I remember right. Maybe 5/8"??
I didn't end up using mine. The bottom edge of my chrome Laredo grill
insert is level with my one piece front clip's bottom edge and I had to
put that edge 1 3/8" above the frame rails to have the hood sit level
and in line with the body's flow.
I used two levels, one in the body and on the body's back rails and one
on the hood's or clip's top and kept shimming until I got it right, then
made a mount for it the right size.
Only 4 of the other stock mounts didn't need shims to fit my 'glass tub
either.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
TwoTracker wrote:
>
> Does anyone know the proper spacing for the radiator mount on an '86 CJ7 ?
> I am reassembling the front end and I have my choice of hockey pucks, hard
> plastic octagon support or mounting material that can be cut to length.
>
> Thanks!
the smaller hole isn't it? If no one else has the size, I can look in
the garage tomorrow and give you a measurement. It isn't very thick if
I remember right. Maybe 5/8"??
I didn't end up using mine. The bottom edge of my chrome Laredo grill
insert is level with my one piece front clip's bottom edge and I had to
put that edge 1 3/8" above the frame rails to have the hood sit level
and in line with the body's flow.
I used two levels, one in the body and on the body's back rails and one
on the hood's or clip's top and kept shimming until I got it right, then
made a mount for it the right size.
Only 4 of the other stock mounts didn't need shims to fit my 'glass tub
either.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
TwoTracker wrote:
>
> Does anyone know the proper spacing for the radiator mount on an '86 CJ7 ?
> I am reassembling the front end and I have my choice of hockey pucks, hard
> plastic octagon support or mounting material that can be cut to length.
>
> Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III
Jeep Mailing List
2
09-15-2003 05:53 PM
Jerry Bransford
Jeep Mailing List
0
09-15-2003 12:49 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)