Re: Quick question about YJ 4 banger...
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-9FB68D.17325028102003@corp.newsfeeds.com...
> In article <moomesa-F1D0CB.15075728102003@corp.newsfeeds.com>,
> Jeepers <moomesa@INVALIDfnbnet.net> wrote:
>
> > The valve cover is leaking on wife's YJ. Gasket or sealant?
> >
> >
>
> O.K. That's one vote for gasket, one for sealant. Before I remove
> the dang thing out at my place in the sticks, I'll need a tie breaker.
>
Buy both before you begin the job, and return the unused materials after you
are done. Not much of a tie breaker is it? ;o)

Earle

Re: Quick question about YJ 4 banger...
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-9FB68D.17325028102003@corp.newsfeeds.com...
> In article <moomesa-F1D0CB.15075728102003@corp.newsfeeds.com>,
> Jeepers <moomesa@INVALIDfnbnet.net> wrote:
>
> > The valve cover is leaking on wife's YJ. Gasket or sealant?
> >
> >
>
> O.K. That's one vote for gasket, one for sealant. Before I remove
> the dang thing out at my place in the sticks, I'll need a tie breaker.
>
Buy both before you begin the job, and return the unused materials after you
are done. Not much of a tie breaker is it? ;o)

Earle

Re: Quick question about YJ 4 banger...
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-9FB68D.17325028102003@corp.newsfeeds.com...
> In article <moomesa-F1D0CB.15075728102003@corp.newsfeeds.com>,
> Jeepers <moomesa@INVALIDfnbnet.net> wrote:
>
> > The valve cover is leaking on wife's YJ. Gasket or sealant?
> >
> >
>
> O.K. That's one vote for gasket, one for sealant. Before I remove
> the dang thing out at my place in the sticks, I'll need a tie breaker.
>
Buy both before you begin the job, and return the unused materials after you
are done. Not much of a tie breaker is it? ;o)

Earle

Re: Quick question about YJ 4 banger...
 

In article <bnmuic$12iikr$1@ID-147790.news.uni-berlin.de>,
"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote:

> Buy both before you begin the job, and return the unused materials after you
> are done. Not much of a tie breaker is it? ;o)
>
> Earle

Not too bad. I have all kinds of good sealant, and I try to avoid
AutoBone® when I can.


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Re: Quick question about YJ 4 banger...
 

In article <bnmuic$12iikr$1@ID-147790.news.uni-berlin.de>,
"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote:

> Buy both before you begin the job, and return the unused materials after you
> are done. Not much of a tie breaker is it? ;o)
>
> Earle

Not too bad. I have all kinds of good sealant, and I try to avoid
AutoBone® when I can.


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Re: Quick question about YJ 4 banger...
 

In article <bnmuic$12iikr$1@ID-147790.news.uni-berlin.de>,
"Earle Horton" <enfermero_diabolico@registerednurses.com> wrote:

> Buy both before you begin the job, and return the unused materials after you
> are done. Not much of a tie breaker is it? ;o)
>
> Earle

Not too bad. I have all kinds of good sealant, and I try to avoid
AutoBone® when I can.


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Re: Quick question about YJ 4 banger...
 

In article <9DDnb.39559$Ol.917893@read1.cgocable.net>,
"Redge Egder" <RedgeEgder@hotmail.com> wrote:

> For a more permanent solution I'd go with the gasket

O.K., 1 for gasket

> (ie, for the valve cover). For a less permanent solution such as
> regularily replacing diff fluids, etc... I'd go with a blue silicone
> gasket maker.

1 for gasket maker

> Where I'm located a gasket maker is about $3/tube where
> a gasket is considerably more moola and almost never in stock.

:^) Still a tie!


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Re: Quick question about YJ 4 banger...
 

In article <9DDnb.39559$Ol.917893@read1.cgocable.net>,
"Redge Egder" <RedgeEgder@hotmail.com> wrote:

> For a more permanent solution I'd go with the gasket

O.K., 1 for gasket

> (ie, for the valve cover). For a less permanent solution such as
> regularily replacing diff fluids, etc... I'd go with a blue silicone
> gasket maker.

1 for gasket maker

> Where I'm located a gasket maker is about $3/tube where
> a gasket is considerably more moola and almost never in stock.

:^) Still a tie!


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Re: Quick question about YJ 4 banger...
 

In article <9DDnb.39559$Ol.917893@read1.cgocable.net>,
"Redge Egder" <RedgeEgder@hotmail.com> wrote:

> For a more permanent solution I'd go with the gasket

O.K., 1 for gasket

> (ie, for the valve cover). For a less permanent solution such as
> regularily replacing diff fluids, etc... I'd go with a blue silicone
> gasket maker.

1 for gasket maker

> Where I'm located a gasket maker is about $3/tube where
> a gasket is considerably more moola and almost never in stock.

:^) Still a tie!


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Re: Quick question about YJ 4 banger...
 

OK, put the gasket on, then when you accidentally torque the bolts a
little too tight and spit and squeeze out gasket from under the bolts,
then you have the silicone.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Jeepers wrote:
>
> O.K. That's one vote for gasket, one for sealant. Before I remove the
> dang thing out at my place in the sticks, I'll need a tie breaker.