Question on plow mounting
08-19-2006, 08:08 PM
#1
Guest
Posts: n/a
Question on plow mounting
I just bought this plow setup for my '89 YJ
http://bsartist.com/plow.htm
I can't figure out where one pair of brackets go. It's the relatively
thin pair with a slight bend in them and an angle iron welded onto one
end. They are highlighted in the first picture. If anyone has any ideas
I would love to hear them.
Thanx much
Bill Smith
http://bsartist.com/plow.htm
I can't figure out where one pair of brackets go. It's the relatively
thin pair with a slight bend in them and an angle iron welded onto one
end. They are highlighted in the first picture. If anyone has any ideas
I would love to hear them.
Thanx much
Bill Smith
08-19-2006, 08:13 PM
#2
Guest
Posts: n/a
Re: Question on plow mounting
Hi Bill,
I would write the manufacturer, Google a web site.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
BSartist wrote:
>
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
I would write the manufacturer, Google a web site.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
BSartist wrote:
>
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
08-19-2006, 08:13 PM
#3
Guest
Posts: n/a
Re: Question on plow mounting
Hi Bill,
I would write the manufacturer, Google a web site.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
BSartist wrote:
>
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
I would write the manufacturer, Google a web site.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
BSartist wrote:
>
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
08-19-2006, 08:13 PM
#4
Guest
Posts: n/a
Re: Question on plow mounting
Hi Bill,
I would write the manufacturer, Google a web site.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
BSartist wrote:
>
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
I would write the manufacturer, Google a web site.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
BSartist wrote:
>
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
08-19-2006, 08:13 PM
#5
Guest
Posts: n/a
Re: Question on plow mounting
Hi Bill,
I would write the manufacturer, Google a web site.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
BSartist wrote:
>
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
I would write the manufacturer, Google a web site.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
BSartist wrote:
>
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
08-19-2006, 11:18 PM
#6
Guest
Posts: n/a
Re: Question on plow mounting
I had something like this about thirty years ago, with a plow that was
supposed to fit a Farmall tractor. I held pieces up to the tractor, looking
for bolt holes that matched up, and eventually it came to me. If you can
figure out where any of it goes, bolt that part on and then look for a place
to fit your mystery brackets. Is this plow absolutely, positively known to
fit your model Jeep?
Do you know which transmission you have? Some of the YJ transmissions are
considered marginal for heavy duty use like plowing. Folks around the
corner from me have a big clutch and some kind of granny low transmission in
the CJ they use for plowing their service station lot.
Earle
"BSartist" <bs@BSartist.com> wrote in message
news:1156032537.875841.127390@75g2000cwc.googlegro ups.com...
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
>
supposed to fit a Farmall tractor. I held pieces up to the tractor, looking
for bolt holes that matched up, and eventually it came to me. If you can
figure out where any of it goes, bolt that part on and then look for a place
to fit your mystery brackets. Is this plow absolutely, positively known to
fit your model Jeep?
Do you know which transmission you have? Some of the YJ transmissions are
considered marginal for heavy duty use like plowing. Folks around the
corner from me have a big clutch and some kind of granny low transmission in
the CJ they use for plowing their service station lot.
Earle
"BSartist" <bs@BSartist.com> wrote in message
news:1156032537.875841.127390@75g2000cwc.googlegro ups.com...
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
>
08-19-2006, 11:18 PM
#7
Guest
Posts: n/a
Re: Question on plow mounting
I had something like this about thirty years ago, with a plow that was
supposed to fit a Farmall tractor. I held pieces up to the tractor, looking
for bolt holes that matched up, and eventually it came to me. If you can
figure out where any of it goes, bolt that part on and then look for a place
to fit your mystery brackets. Is this plow absolutely, positively known to
fit your model Jeep?
Do you know which transmission you have? Some of the YJ transmissions are
considered marginal for heavy duty use like plowing. Folks around the
corner from me have a big clutch and some kind of granny low transmission in
the CJ they use for plowing their service station lot.
Earle
"BSartist" <bs@BSartist.com> wrote in message
news:1156032537.875841.127390@75g2000cwc.googlegro ups.com...
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
>
supposed to fit a Farmall tractor. I held pieces up to the tractor, looking
for bolt holes that matched up, and eventually it came to me. If you can
figure out where any of it goes, bolt that part on and then look for a place
to fit your mystery brackets. Is this plow absolutely, positively known to
fit your model Jeep?
Do you know which transmission you have? Some of the YJ transmissions are
considered marginal for heavy duty use like plowing. Folks around the
corner from me have a big clutch and some kind of granny low transmission in
the CJ they use for plowing their service station lot.
Earle
"BSartist" <bs@BSartist.com> wrote in message
news:1156032537.875841.127390@75g2000cwc.googlegro ups.com...
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
>
08-19-2006, 11:18 PM
#8
Guest
Posts: n/a
Re: Question on plow mounting
I had something like this about thirty years ago, with a plow that was
supposed to fit a Farmall tractor. I held pieces up to the tractor, looking
for bolt holes that matched up, and eventually it came to me. If you can
figure out where any of it goes, bolt that part on and then look for a place
to fit your mystery brackets. Is this plow absolutely, positively known to
fit your model Jeep?
Do you know which transmission you have? Some of the YJ transmissions are
considered marginal for heavy duty use like plowing. Folks around the
corner from me have a big clutch and some kind of granny low transmission in
the CJ they use for plowing their service station lot.
Earle
"BSartist" <bs@BSartist.com> wrote in message
news:1156032537.875841.127390@75g2000cwc.googlegro ups.com...
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
>
supposed to fit a Farmall tractor. I held pieces up to the tractor, looking
for bolt holes that matched up, and eventually it came to me. If you can
figure out where any of it goes, bolt that part on and then look for a place
to fit your mystery brackets. Is this plow absolutely, positively known to
fit your model Jeep?
Do you know which transmission you have? Some of the YJ transmissions are
considered marginal for heavy duty use like plowing. Folks around the
corner from me have a big clutch and some kind of granny low transmission in
the CJ they use for plowing their service station lot.
Earle
"BSartist" <bs@BSartist.com> wrote in message
news:1156032537.875841.127390@75g2000cwc.googlegro ups.com...
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
>
08-19-2006, 11:18 PM
#9
Guest
Posts: n/a
Re: Question on plow mounting
I had something like this about thirty years ago, with a plow that was
supposed to fit a Farmall tractor. I held pieces up to the tractor, looking
for bolt holes that matched up, and eventually it came to me. If you can
figure out where any of it goes, bolt that part on and then look for a place
to fit your mystery brackets. Is this plow absolutely, positively known to
fit your model Jeep?
Do you know which transmission you have? Some of the YJ transmissions are
considered marginal for heavy duty use like plowing. Folks around the
corner from me have a big clutch and some kind of granny low transmission in
the CJ they use for plowing their service station lot.
Earle
"BSartist" <bs@BSartist.com> wrote in message
news:1156032537.875841.127390@75g2000cwc.googlegro ups.com...
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
>
supposed to fit a Farmall tractor. I held pieces up to the tractor, looking
for bolt holes that matched up, and eventually it came to me. If you can
figure out where any of it goes, bolt that part on and then look for a place
to fit your mystery brackets. Is this plow absolutely, positively known to
fit your model Jeep?
Do you know which transmission you have? Some of the YJ transmissions are
considered marginal for heavy duty use like plowing. Folks around the
corner from me have a big clutch and some kind of granny low transmission in
the CJ they use for plowing their service station lot.
Earle
"BSartist" <bs@BSartist.com> wrote in message
news:1156032537.875841.127390@75g2000cwc.googlegro ups.com...
> I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
>
08-20-2006, 01:02 AM
#10
Guest
Posts: n/a
Re: Question on plow mounting
If I am not mistaken they go to each side of the frame and bolt to the cross
member of the plow frame to provide support.
Coasty
"BSartist" <bs@BSartist.com> wrote in message
news:1156032537.875841.127390@75g2000cwc.googlegro ups.com...
>I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
>
member of the plow frame to provide support.
Coasty
"BSartist" <bs@BSartist.com> wrote in message
news:1156032537.875841.127390@75g2000cwc.googlegro ups.com...
>I just bought this plow setup for my '89 YJ
>
> http://bsartist.com/plow.htm
>
> I can't figure out where one pair of brackets go. It's the relatively
> thin pair with a slight bend in them and an angle iron welded onto one
> end. They are highlighted in the first picture. If anyone has any ideas
> I would love to hear them.
>
> Thanx much
> Bill Smith
>
