Question for Bill - AW-4 handle
06-20-2005, 05:54 PM
#1
Guest
Posts: n/a
Question for Bill - AW-4 handle
Bill - I'm betting you will probably know the answer and may even have a
picture...
For a '99 XJ with the AW-4 tranny, is there any way to remove the T from
the shifter shaft? I never have liked it and would like to replace it
with something like a Hurst shifter T handle. I've seen Hurst T handles
with integrated buttons that are used for hill holder brakes. I'd bet
that button could replace the AW-4's T handle button (assuming the AW-4
button activates a solenoid instead of a mechanical linkage).
I've been told I can just pull the T off the shaft, but I'm afraid to do
that - I suspect that shaft is just held in with some plastic thingies.
Anyone know how to do this or have pictures?
picture...
For a '99 XJ with the AW-4 tranny, is there any way to remove the T from
the shifter shaft? I never have liked it and would like to replace it
with something like a Hurst shifter T handle. I've seen Hurst T handles
with integrated buttons that are used for hill holder brakes. I'd bet
that button could replace the AW-4's T handle button (assuming the AW-4
button activates a solenoid instead of a mechanical linkage).
I've been told I can just pull the T off the shaft, but I'm afraid to do
that - I suspect that shaft is just held in with some plastic thingies.
Anyone know how to do this or have pictures?
06-20-2005, 06:55 PM
#2
Guest
Posts: n/a
Re: Question for Bill - AW-4 handle
Leave the Hurst to the Real transmissions:
http://www.----------.com/B%26Msticker.jpg Our litigious society has
forced us to use ignition brake interlocks:
http://www.----------.com/xjShiftInterlock.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Clap Trap wrote:
>
> Bill - I'm betting you will probably know the answer and may even have a
> picture...
>
> For a '99 XJ with the AW-4 tranny, is there any way to remove the T from
> the shifter shaft? I never have liked it and would like to replace it
> with something like a Hurst shifter T handle. I've seen Hurst T handles
> with integrated buttons that are used for hill holder brakes. I'd bet
> that button could replace the AW-4's T handle button (assuming the AW-4
> button activates a solenoid instead of a mechanical linkage).
>
> I've been told I can just pull the T off the shaft, but I'm afraid to do
> that - I suspect that shaft is just held in with some plastic thingies.
>
> Anyone know how to do this or have pictures?
http://www.----------.com/B%26Msticker.jpg Our litigious society has
forced us to use ignition brake interlocks:
http://www.----------.com/xjShiftInterlock.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Clap Trap wrote:
>
> Bill - I'm betting you will probably know the answer and may even have a
> picture...
>
> For a '99 XJ with the AW-4 tranny, is there any way to remove the T from
> the shifter shaft? I never have liked it and would like to replace it
> with something like a Hurst shifter T handle. I've seen Hurst T handles
> with integrated buttons that are used for hill holder brakes. I'd bet
> that button could replace the AW-4's T handle button (assuming the AW-4
> button activates a solenoid instead of a mechanical linkage).
>
> I've been told I can just pull the T off the shaft, but I'm afraid to do
> that - I suspect that shaft is just held in with some plastic thingies.
>
> Anyone know how to do this or have pictures?
06-20-2005, 06:55 PM
#3
Guest
Posts: n/a
Re: Question for Bill - AW-4 handle
Leave the Hurst to the Real transmissions:
http://www.----------.com/B%26Msticker.jpg Our litigious society has
forced us to use ignition brake interlocks:
http://www.----------.com/xjShiftInterlock.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Clap Trap wrote:
>
> Bill - I'm betting you will probably know the answer and may even have a
> picture...
>
> For a '99 XJ with the AW-4 tranny, is there any way to remove the T from
> the shifter shaft? I never have liked it and would like to replace it
> with something like a Hurst shifter T handle. I've seen Hurst T handles
> with integrated buttons that are used for hill holder brakes. I'd bet
> that button could replace the AW-4's T handle button (assuming the AW-4
> button activates a solenoid instead of a mechanical linkage).
>
> I've been told I can just pull the T off the shaft, but I'm afraid to do
> that - I suspect that shaft is just held in with some plastic thingies.
>
> Anyone know how to do this or have pictures?
http://www.----------.com/B%26Msticker.jpg Our litigious society has
forced us to use ignition brake interlocks:
http://www.----------.com/xjShiftInterlock.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Clap Trap wrote:
>
> Bill - I'm betting you will probably know the answer and may even have a
> picture...
>
> For a '99 XJ with the AW-4 tranny, is there any way to remove the T from
> the shifter shaft? I never have liked it and would like to replace it
> with something like a Hurst shifter T handle. I've seen Hurst T handles
> with integrated buttons that are used for hill holder brakes. I'd bet
> that button could replace the AW-4's T handle button (assuming the AW-4
> button activates a solenoid instead of a mechanical linkage).
>
> I've been told I can just pull the T off the shaft, but I'm afraid to do
> that - I suspect that shaft is just held in with some plastic thingies.
>
> Anyone know how to do this or have pictures?
06-20-2005, 06:55 PM
#4
Guest
Posts: n/a
Re: Question for Bill - AW-4 handle
Leave the Hurst to the Real transmissions:
http://www.----------.com/B%26Msticker.jpg Our litigious society has
forced us to use ignition brake interlocks:
http://www.----------.com/xjShiftInterlock.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Clap Trap wrote:
>
> Bill - I'm betting you will probably know the answer and may even have a
> picture...
>
> For a '99 XJ with the AW-4 tranny, is there any way to remove the T from
> the shifter shaft? I never have liked it and would like to replace it
> with something like a Hurst shifter T handle. I've seen Hurst T handles
> with integrated buttons that are used for hill holder brakes. I'd bet
> that button could replace the AW-4's T handle button (assuming the AW-4
> button activates a solenoid instead of a mechanical linkage).
>
> I've been told I can just pull the T off the shaft, but I'm afraid to do
> that - I suspect that shaft is just held in with some plastic thingies.
>
> Anyone know how to do this or have pictures?
http://www.----------.com/B%26Msticker.jpg Our litigious society has
forced us to use ignition brake interlocks:
http://www.----------.com/xjShiftInterlock.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Clap Trap wrote:
>
> Bill - I'm betting you will probably know the answer and may even have a
> picture...
>
> For a '99 XJ with the AW-4 tranny, is there any way to remove the T from
> the shifter shaft? I never have liked it and would like to replace it
> with something like a Hurst shifter T handle. I've seen Hurst T handles
> with integrated buttons that are used for hill holder brakes. I'd bet
> that button could replace the AW-4's T handle button (assuming the AW-4
> button activates a solenoid instead of a mechanical linkage).
>
> I've been told I can just pull the T off the shaft, but I'm afraid to do
> that - I suspect that shaft is just held in with some plastic thingies.
>
> Anyone know how to do this or have pictures?
06-20-2005, 06:55 PM
#5
Guest
Posts: n/a
Re: Question for Bill - AW-4 handle
Leave the Hurst to the Real transmissions:
http://www.----------.com/B%26Msticker.jpg Our litigious society has
forced us to use ignition brake interlocks:
http://www.----------.com/xjShiftInterlock.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Clap Trap wrote:
>
> Bill - I'm betting you will probably know the answer and may even have a
> picture...
>
> For a '99 XJ with the AW-4 tranny, is there any way to remove the T from
> the shifter shaft? I never have liked it and would like to replace it
> with something like a Hurst shifter T handle. I've seen Hurst T handles
> with integrated buttons that are used for hill holder brakes. I'd bet
> that button could replace the AW-4's T handle button (assuming the AW-4
> button activates a solenoid instead of a mechanical linkage).
>
> I've been told I can just pull the T off the shaft, but I'm afraid to do
> that - I suspect that shaft is just held in with some plastic thingies.
>
> Anyone know how to do this or have pictures?
http://www.----------.com/B%26Msticker.jpg Our litigious society has
forced us to use ignition brake interlocks:
http://www.----------.com/xjShiftInterlock.pdf
God Bless America, ßill O|||||||O
mailto:--------------------
Clap Trap wrote:
>
> Bill - I'm betting you will probably know the answer and may even have a
> picture...
>
> For a '99 XJ with the AW-4 tranny, is there any way to remove the T from
> the shifter shaft? I never have liked it and would like to replace it
> with something like a Hurst shifter T handle. I've seen Hurst T handles
> with integrated buttons that are used for hill holder brakes. I'd bet
> that button could replace the AW-4's T handle button (assuming the AW-4
> button activates a solenoid instead of a mechanical linkage).
>
> I've been told I can just pull the T off the shaft, but I'm afraid to do
> that - I suspect that shaft is just held in with some plastic thingies.
>
> Anyone know how to do this or have pictures?
06-20-2005, 08:25 PM
#6
Guest
Posts: n/a
Re: Question for Bill - AW-4 handle
Thanks for the picts Bill.
They show the T handle is a separate piece from the shaft, but nothing
indicates how to remove it. I don't want to mess with any of the
cabling or anything. Just removing the handle shouldn't require
anything other than hooking the button switch to the button on a B&M
type T handle so it should work. If I could just figure out how to get
that handle off.
They show the T handle is a separate piece from the shaft, but nothing
indicates how to remove it. I don't want to mess with any of the
cabling or anything. Just removing the handle shouldn't require
anything other than hooking the button switch to the button on a B&M
type T handle so it should work. If I could just figure out how to get
that handle off.
06-20-2005, 08:25 PM
#7
Guest
Posts: n/a
Re: Question for Bill - AW-4 handle
Thanks for the picts Bill.
They show the T handle is a separate piece from the shaft, but nothing
indicates how to remove it. I don't want to mess with any of the
cabling or anything. Just removing the handle shouldn't require
anything other than hooking the button switch to the button on a B&M
type T handle so it should work. If I could just figure out how to get
that handle off.
They show the T handle is a separate piece from the shaft, but nothing
indicates how to remove it. I don't want to mess with any of the
cabling or anything. Just removing the handle shouldn't require
anything other than hooking the button switch to the button on a B&M
type T handle so it should work. If I could just figure out how to get
that handle off.
06-20-2005, 08:25 PM
#8
Guest
Posts: n/a
Re: Question for Bill - AW-4 handle
Thanks for the picts Bill.
They show the T handle is a separate piece from the shaft, but nothing
indicates how to remove it. I don't want to mess with any of the
cabling or anything. Just removing the handle shouldn't require
anything other than hooking the button switch to the button on a B&M
type T handle so it should work. If I could just figure out how to get
that handle off.
They show the T handle is a separate piece from the shaft, but nothing
indicates how to remove it. I don't want to mess with any of the
cabling or anything. Just removing the handle shouldn't require
anything other than hooking the button switch to the button on a B&M
type T handle so it should work. If I could just figure out how to get
that handle off.
06-20-2005, 08:25 PM
#9
Guest
Posts: n/a
Re: Question for Bill - AW-4 handle
Thanks for the picts Bill.
They show the T handle is a separate piece from the shaft, but nothing
indicates how to remove it. I don't want to mess with any of the
cabling or anything. Just removing the handle shouldn't require
anything other than hooking the button switch to the button on a B&M
type T handle so it should work. If I could just figure out how to get
that handle off.
They show the T handle is a separate piece from the shaft, but nothing
indicates how to remove it. I don't want to mess with any of the
cabling or anything. Just removing the handle shouldn't require
anything other than hooking the button switch to the button on a B&M
type T handle so it should work. If I could just figure out how to get
that handle off.
06-20-2005, 09:29 PM
#10
Guest
Posts: n/a
Re: Question for Bill - AW-4 handle
This may not help, but the last console automatic car I drove had a small
allen screw in the front of the handle that held it onto the stick. It was
also a 76 Dodge Aspen.
HTH
Carl
"Clap Trap" <nowhere@the.net> wrote in message
news:88a38$42b73b2a$18d60a3d$10027@KNOLOGY.NET...
> Bill - I'm betting you will probably know the answer and may even have a
> picture...
>
> For a '99 XJ with the AW-4 tranny, is there any way to remove the T from
> the shifter shaft? I never have liked it and would like to replace it
> with something like a Hurst shifter T handle. I've seen Hurst T handles
> with integrated buttons that are used for hill holder brakes. I'd bet
> that button could replace the AW-4's T handle button (assuming the AW-4
> button activates a solenoid instead of a mechanical linkage).
>
> I've been told I can just pull the T off the shaft, but I'm afraid to do
> that - I suspect that shaft is just held in with some plastic thingies.
>
> Anyone know how to do this or have pictures?
allen screw in the front of the handle that held it onto the stick. It was
also a 76 Dodge Aspen.
HTH
Carl
"Clap Trap" <nowhere@the.net> wrote in message
news:88a38$42b73b2a$18d60a3d$10027@KNOLOGY.NET...
> Bill - I'm betting you will probably know the answer and may even have a
> picture...
>
> For a '99 XJ with the AW-4 tranny, is there any way to remove the T from
> the shifter shaft? I never have liked it and would like to replace it
> with something like a Hurst shifter T handle. I've seen Hurst T handles
> with integrated buttons that are used for hill holder brakes. I'd bet
> that button could replace the AW-4's T handle button (assuming the AW-4
> button activates a solenoid instead of a mechanical linkage).
>
> I've been told I can just pull the T off the shaft, but I'm afraid to do
> that - I suspect that shaft is just held in with some plastic thingies.
>
> Anyone know how to do this or have pictures?
