Question about intake manifold
04-04-2004, 09:42 PM
#1
Guest
Posts: n/a
Question about intake manifold
Hi. I just installed an Edelbrock Performer intake manifold on my
Jeep and was wondering if someone coud tell me what goes here...
http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
See the oil filler tube with the chrome cap on it? See the threaded
hole just to the left of it? There are two to the left of it
actually. The smaller one (I think) is for the coil mounting bracket,
but I don't know what the larger one is for. Ideas? Thank you.
"I can hammer it back into shape later."
Jeep and was wondering if someone coud tell me what goes here...
http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
See the oil filler tube with the chrome cap on it? See the threaded
hole just to the left of it? There are two to the left of it
actually. The smaller one (I think) is for the coil mounting bracket,
but I don't know what the larger one is for. Ideas? Thank you.
"I can hammer it back into shape later."
04-04-2004, 10:37 PM
#2
Guest
Posts: n/a
Re: Question about intake manifold
I see a couple of heater hoses.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Shaggie wrote:
>
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Shaggie wrote:
>
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
04-04-2004, 10:37 PM
#3
Guest
Posts: n/a
Re: Question about intake manifold
I see a couple of heater hoses.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Shaggie wrote:
>
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Shaggie wrote:
>
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
04-04-2004, 10:37 PM
#4
Guest
Posts: n/a
Re: Question about intake manifold
I see a couple of heater hoses.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Shaggie wrote:
>
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Shaggie wrote:
>
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
04-04-2004, 10:37 PM
#5
Guest
Posts: n/a
Re: Question about intake manifold
I see a couple of heater hoses.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Shaggie wrote:
>
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Shaggie wrote:
>
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
04-04-2004, 10:40 PM
#6
Guest
Posts: n/a
Re: Question about intake manifold
"Shaggie" <me@hotmail.com> wrote in message
news:c5e1705karg18277h1r8nnk3qgtsjq928c@4ax.com...
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
That hole looks like it goes into the coolant crossover package (if I'm
looking at the right one). Some mechanical water temp guages have a larger
connector than the electric ones, so that is usually why they put them
there. If all of your coolant lines are hooked up and this port is still
open, then you simply need to put a pipe plug in there.
Chris
04-04-2004, 10:40 PM
#7
Guest
Posts: n/a
Re: Question about intake manifold
"Shaggie" <me@hotmail.com> wrote in message
news:c5e1705karg18277h1r8nnk3qgtsjq928c@4ax.com...
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
That hole looks like it goes into the coolant crossover package (if I'm
looking at the right one). Some mechanical water temp guages have a larger
connector than the electric ones, so that is usually why they put them
there. If all of your coolant lines are hooked up and this port is still
open, then you simply need to put a pipe plug in there.
Chris
04-04-2004, 10:40 PM
#8
Guest
Posts: n/a
Re: Question about intake manifold
"Shaggie" <me@hotmail.com> wrote in message
news:c5e1705karg18277h1r8nnk3qgtsjq928c@4ax.com...
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
That hole looks like it goes into the coolant crossover package (if I'm
looking at the right one). Some mechanical water temp guages have a larger
connector than the electric ones, so that is usually why they put them
there. If all of your coolant lines are hooked up and this port is still
open, then you simply need to put a pipe plug in there.
Chris
04-04-2004, 10:40 PM
#9
Guest
Posts: n/a
Re: Question about intake manifold
"Shaggie" <me@hotmail.com> wrote in message
news:c5e1705karg18277h1r8nnk3qgtsjq928c@4ax.com...
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
That hole looks like it goes into the coolant crossover package (if I'm
looking at the right one). Some mechanical water temp guages have a larger
connector than the electric ones, so that is usually why they put them
there. If all of your coolant lines are hooked up and this port is still
open, then you simply need to put a pipe plug in there.
Chris
04-05-2004, 01:00 AM
#10
Guest
Posts: n/a
Re: Question about intake manifold
That is where the EGR CTO is on my pickup ('77 J10)
CJR
untie my address to reply
Shaggie wrote:
>
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
CJR
untie my address to reply
Shaggie wrote:
>
> Hi. I just installed an Edelbrock Performer intake manifold on my
> Jeep and was wondering if someone coud tell me what goes here...
> http://jeepadventures.dyndns.org/jeep/stage2/16.jpg
> See the oil filler tube with the chrome cap on it? See the threaded
> hole just to the left of it? There are two to the left of it
> actually. The smaller one (I think) is for the coil mounting bracket,
> but I don't know what the larger one is for. Ideas? Thank you.
>
> "I can hammer it back into shape later."
