Putting two tow straps together???
12-20-2005, 01:57 PM
#31
Guest
Posts: n/a
Re: Putting two tow straps together???
Great animations !
--
Billy_Ray@fuseSPAM.net (Remove the SPAM)
2002 WJ Brilliant Black Crystal Pearl Coat
Helping is why we are all here on RAMJ+W, or should be.
..
"Seahag" <Seahag@toadymail.net> wrote in message
news:43a82af5_3@newsfeed.slurp.net...
> Two bowlines?
>
> http://www.apparent-wind.com/knots/bowline/
>
> Seahag
>
> "4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
> news:2dJpf.13208$wg4.4127@edtnps84...
>> Any safer means of attaching two straps together, than with a wooden
>> doweling and still be able to get them apart??
>>
>> --
>> Jeff '03 TJ & '95 ZJ
>> http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
>> http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
>>
>
>
--
Billy_Ray@fuseSPAM.net (Remove the SPAM)
2002 WJ Brilliant Black Crystal Pearl Coat
Helping is why we are all here on RAMJ+W, or should be.
..
"Seahag" <Seahag@toadymail.net> wrote in message
news:43a82af5_3@newsfeed.slurp.net...
> Two bowlines?
>
> http://www.apparent-wind.com/knots/bowline/
>
> Seahag
>
> "4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
> news:2dJpf.13208$wg4.4127@edtnps84...
>> Any safer means of attaching two straps together, than with a wooden
>> doweling and still be able to get them apart??
>>
>> --
>> Jeff '03 TJ & '95 ZJ
>> http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
>> http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
>>
>
>
12-20-2005, 02:16 PM
#32
Guest
Posts: n/a
Re: Putting two tow straps together???
Jim Gemmill wrote:
>
> "Rusted" <no@email.com> wrote in message
> news:L1Wpf.20281$Lj2.15179@fe13.usenetserver.com.. .
> > bowlines don't slip, but put 8K of pulling power on them and they won't
> come
> > untied either.
> >
> >
> > "Seahag" <Seahag@toadymail.net> wrote in message
> > news:43a82af5_3@newsfeed.slurp.net...
> > > Two bowlines?
> > >
> > > http://www.apparent-wind.com/knots/bowline/
> > >
> > > Seahag
> > >
> > > "4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
> > > news:2dJpf.13208$wg4.4127@edtnps84...
> > >> Any safer means of attaching two straps together, than with a wooden
> > >> doweling and still be able to get them apart??
> > >>
> > >> --
> > >> Jeff '03 TJ & '95 ZJ
> > >> http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
> > >> http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
> > >>
> > >
> > >
> >
> >
> A bowline on a bite may be easier to untie after hard pull.
> SEE http://www.netknots.com/html/boating_knots.html
> for details
>
> >
If you make a knot, bowline or on a bight in a ****** strap that gets
used to pull something out of mud say, better make it a pretty one
because that knot will be very likely permanent.
There 'is' a reason they put loops on ****** straps. The loop on the
end is super easy to mate up with the loop on the next strap to make
extensions. These even get pretty tight, so folks stick a dowel or
stick in the mating area of the loops to help pry it open.
It is easy. You hold the loop of the first strap up in the air and put
the loop of the second strap 'over' it. You then take the far end of
the second strap and pass it 'through' the loop of the first strap.
This gives you a figure 8 knot that you can put a stick into to help it
open later.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
>
> "Rusted" <no@email.com> wrote in message
> news:L1Wpf.20281$Lj2.15179@fe13.usenetserver.com.. .
> > bowlines don't slip, but put 8K of pulling power on them and they won't
> come
> > untied either.
> >
> >
> > "Seahag" <Seahag@toadymail.net> wrote in message
> > news:43a82af5_3@newsfeed.slurp.net...
> > > Two bowlines?
> > >
> > > http://www.apparent-wind.com/knots/bowline/
> > >
> > > Seahag
> > >
> > > "4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
> > > news:2dJpf.13208$wg4.4127@edtnps84...
> > >> Any safer means of attaching two straps together, than with a wooden
> > >> doweling and still be able to get them apart??
> > >>
> > >> --
> > >> Jeff '03 TJ & '95 ZJ
> > >> http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
> > >> http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
> > >>
> > >
> > >
> >
> >
> A bowline on a bite may be easier to untie after hard pull.
> SEE http://www.netknots.com/html/boating_knots.html
> for details
>
> >
If you make a knot, bowline or on a bight in a ****** strap that gets
used to pull something out of mud say, better make it a pretty one
because that knot will be very likely permanent.
There 'is' a reason they put loops on ****** straps. The loop on the
end is super easy to mate up with the loop on the next strap to make
extensions. These even get pretty tight, so folks stick a dowel or
stick in the mating area of the loops to help pry it open.
It is easy. You hold the loop of the first strap up in the air and put
the loop of the second strap 'over' it. You then take the far end of
the second strap and pass it 'through' the loop of the first strap.
This gives you a figure 8 knot that you can put a stick into to help it
open later.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
12-20-2005, 02:16 PM
#33
Guest
Posts: n/a
Re: Putting two tow straps together???
Jim Gemmill wrote:
>
> "Rusted" <no@email.com> wrote in message
> news:L1Wpf.20281$Lj2.15179@fe13.usenetserver.com.. .
> > bowlines don't slip, but put 8K of pulling power on them and they won't
> come
> > untied either.
> >
> >
> > "Seahag" <Seahag@toadymail.net> wrote in message
> > news:43a82af5_3@newsfeed.slurp.net...
> > > Two bowlines?
> > >
> > > http://www.apparent-wind.com/knots/bowline/
> > >
> > > Seahag
> > >
> > > "4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
> > > news:2dJpf.13208$wg4.4127@edtnps84...
> > >> Any safer means of attaching two straps together, than with a wooden
> > >> doweling and still be able to get them apart??
> > >>
> > >> --
> > >> Jeff '03 TJ & '95 ZJ
> > >> http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
> > >> http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
> > >>
> > >
> > >
> >
> >
> A bowline on a bite may be easier to untie after hard pull.
> SEE http://www.netknots.com/html/boating_knots.html
> for details
>
> >
If you make a knot, bowline or on a bight in a ****** strap that gets
used to pull something out of mud say, better make it a pretty one
because that knot will be very likely permanent.
There 'is' a reason they put loops on ****** straps. The loop on the
end is super easy to mate up with the loop on the next strap to make
extensions. These even get pretty tight, so folks stick a dowel or
stick in the mating area of the loops to help pry it open.
It is easy. You hold the loop of the first strap up in the air and put
the loop of the second strap 'over' it. You then take the far end of
the second strap and pass it 'through' the loop of the first strap.
This gives you a figure 8 knot that you can put a stick into to help it
open later.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
>
> "Rusted" <no@email.com> wrote in message
> news:L1Wpf.20281$Lj2.15179@fe13.usenetserver.com.. .
> > bowlines don't slip, but put 8K of pulling power on them and they won't
> come
> > untied either.
> >
> >
> > "Seahag" <Seahag@toadymail.net> wrote in message
> > news:43a82af5_3@newsfeed.slurp.net...
> > > Two bowlines?
> > >
> > > http://www.apparent-wind.com/knots/bowline/
> > >
> > > Seahag
> > >
> > > "4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
> > > news:2dJpf.13208$wg4.4127@edtnps84...
> > >> Any safer means of attaching two straps together, than with a wooden
> > >> doweling and still be able to get them apart??
> > >>
> > >> --
> > >> Jeff '03 TJ & '95 ZJ
> > >> http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
> > >> http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
> > >>
> > >
> > >
> >
> >
> A bowline on a bite may be easier to untie after hard pull.
> SEE http://www.netknots.com/html/boating_knots.html
> for details
>
> >
If you make a knot, bowline or on a bight in a ****** strap that gets
used to pull something out of mud say, better make it a pretty one
because that knot will be very likely permanent.
There 'is' a reason they put loops on ****** straps. The loop on the
end is super easy to mate up with the loop on the next strap to make
extensions. These even get pretty tight, so folks stick a dowel or
stick in the mating area of the loops to help pry it open.
It is easy. You hold the loop of the first strap up in the air and put
the loop of the second strap 'over' it. You then take the far end of
the second strap and pass it 'through' the loop of the first strap.
This gives you a figure 8 knot that you can put a stick into to help it
open later.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
12-20-2005, 02:16 PM
#34
Guest
Posts: n/a
Re: Putting two tow straps together???
Jim Gemmill wrote:
>
> "Rusted" <no@email.com> wrote in message
> news:L1Wpf.20281$Lj2.15179@fe13.usenetserver.com.. .
> > bowlines don't slip, but put 8K of pulling power on them and they won't
> come
> > untied either.
> >
> >
> > "Seahag" <Seahag@toadymail.net> wrote in message
> > news:43a82af5_3@newsfeed.slurp.net...
> > > Two bowlines?
> > >
> > > http://www.apparent-wind.com/knots/bowline/
> > >
> > > Seahag
> > >
> > > "4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
> > > news:2dJpf.13208$wg4.4127@edtnps84...
> > >> Any safer means of attaching two straps together, than with a wooden
> > >> doweling and still be able to get them apart??
> > >>
> > >> --
> > >> Jeff '03 TJ & '95 ZJ
> > >> http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
> > >> http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
> > >>
> > >
> > >
> >
> >
> A bowline on a bite may be easier to untie after hard pull.
> SEE http://www.netknots.com/html/boating_knots.html
> for details
>
> >
If you make a knot, bowline or on a bight in a ****** strap that gets
used to pull something out of mud say, better make it a pretty one
because that knot will be very likely permanent.
There 'is' a reason they put loops on ****** straps. The loop on the
end is super easy to mate up with the loop on the next strap to make
extensions. These even get pretty tight, so folks stick a dowel or
stick in the mating area of the loops to help pry it open.
It is easy. You hold the loop of the first strap up in the air and put
the loop of the second strap 'over' it. You then take the far end of
the second strap and pass it 'through' the loop of the first strap.
This gives you a figure 8 knot that you can put a stick into to help it
open later.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
>
> "Rusted" <no@email.com> wrote in message
> news:L1Wpf.20281$Lj2.15179@fe13.usenetserver.com.. .
> > bowlines don't slip, but put 8K of pulling power on them and they won't
> come
> > untied either.
> >
> >
> > "Seahag" <Seahag@toadymail.net> wrote in message
> > news:43a82af5_3@newsfeed.slurp.net...
> > > Two bowlines?
> > >
> > > http://www.apparent-wind.com/knots/bowline/
> > >
> > > Seahag
> > >
> > > "4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
> > > news:2dJpf.13208$wg4.4127@edtnps84...
> > >> Any safer means of attaching two straps together, than with a wooden
> > >> doweling and still be able to get them apart??
> > >>
> > >> --
> > >> Jeff '03 TJ & '95 ZJ
> > >> http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
> > >> http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
> > >>
> > >
> > >
> >
> >
> A bowline on a bite may be easier to untie after hard pull.
> SEE http://www.netknots.com/html/boating_knots.html
> for details
>
> >
If you make a knot, bowline or on a bight in a ****** strap that gets
used to pull something out of mud say, better make it a pretty one
because that knot will be very likely permanent.
There 'is' a reason they put loops on ****** straps. The loop on the
end is super easy to mate up with the loop on the next strap to make
extensions. These even get pretty tight, so folks stick a dowel or
stick in the mating area of the loops to help pry it open.
It is easy. You hold the loop of the first strap up in the air and put
the loop of the second strap 'over' it. You then take the far end of
the second strap and pass it 'through' the loop of the first strap.
This gives you a figure 8 knot that you can put a stick into to help it
open later.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Aug./05 http://www.imagestation.com/album/in...?id=2120343242
(More Off Road album links at bottom of the view page)
12-20-2005, 03:26 PM
#35
Guest
Posts: n/a
Re: Putting two tow straps together???
Mike said it all, how could such a simple subject have generated so much
controversy. Oh, of course... this is the Internet.
Mike Romain wrote:
> Jim Gemmill wrote:
>
>>"Rusted" <no@email.com> wrote in message
>>news:L1Wpf.20281$Lj2.15179@fe13.usenetserver.com ...
>>
>>>bowlines don't slip, but put 8K of pulling power on them and they won't
>>
>>come
>>
>>>untied either.
>>>
>>>
>>>"Seahag" <Seahag@toadymail.net> wrote in message
>>>news:43a82af5_3@newsfeed.slurp.net...
>>>
>>>>Two bowlines?
>>>>
>>>>http://www.apparent-wind.com/knots/bowline/
>>>>
>>>>Seahag
>>>>
>>>>"4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
>>>>news:2dJpf.13208$wg4.4127@edtnps84...
>>>>
>>>>>Any safer means of attaching two straps together, than with a wooden
>>>>>doweling and still be able to get them apart??
>>>>>
>>>>>--
>>>>>Jeff '03 TJ & '95 ZJ
>>>>>http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
>>>>>http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
>>>>>
>>>>
>>>>
>>>
>>A bowline on a bite may be easier to untie after hard pull.
>>SEE http://www.netknots.com/html/boating_knots.html
>>for details
>>
>>
>
> If you make a knot, bowline or on a bight in a ****** strap that gets
> used to pull something out of mud say, better make it a pretty one
> because that knot will be very likely permanent.
>
> There 'is' a reason they put loops on ****** straps. The loop on the
> end is super easy to mate up with the loop on the next strap to make
> extensions. These even get pretty tight, so folks stick a dowel or
> stick in the mating area of the loops to help pry it open.
>
> It is easy. You hold the loop of the first strap up in the air and put
> the loop of the second strap 'over' it. You then take the far end of
> the second strap and pass it 'through' the loop of the first strap.
> This gives you a figure 8 knot that you can put a stick into to help it
> open later.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
> (More Off Road album links at bottom of the view page)
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
controversy. Oh, of course... this is the Internet.
Mike Romain wrote:
> Jim Gemmill wrote:
>
>>"Rusted" <no@email.com> wrote in message
>>news:L1Wpf.20281$Lj2.15179@fe13.usenetserver.com ...
>>
>>>bowlines don't slip, but put 8K of pulling power on them and they won't
>>
>>come
>>
>>>untied either.
>>>
>>>
>>>"Seahag" <Seahag@toadymail.net> wrote in message
>>>news:43a82af5_3@newsfeed.slurp.net...
>>>
>>>>Two bowlines?
>>>>
>>>>http://www.apparent-wind.com/knots/bowline/
>>>>
>>>>Seahag
>>>>
>>>>"4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
>>>>news:2dJpf.13208$wg4.4127@edtnps84...
>>>>
>>>>>Any safer means of attaching two straps together, than with a wooden
>>>>>doweling and still be able to get them apart??
>>>>>
>>>>>--
>>>>>Jeff '03 TJ & '95 ZJ
>>>>>http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
>>>>>http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
>>>>>
>>>>
>>>>
>>>
>>A bowline on a bite may be easier to untie after hard pull.
>>SEE http://www.netknots.com/html/boating_knots.html
>>for details
>>
>>
>
> If you make a knot, bowline or on a bight in a ****** strap that gets
> used to pull something out of mud say, better make it a pretty one
> because that knot will be very likely permanent.
>
> There 'is' a reason they put loops on ****** straps. The loop on the
> end is super easy to mate up with the loop on the next strap to make
> extensions. These even get pretty tight, so folks stick a dowel or
> stick in the mating area of the loops to help pry it open.
>
> It is easy. You hold the loop of the first strap up in the air and put
> the loop of the second strap 'over' it. You then take the far end of
> the second strap and pass it 'through' the loop of the first strap.
> This gives you a figure 8 knot that you can put a stick into to help it
> open later.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
> (More Off Road album links at bottom of the view page)
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
12-20-2005, 03:26 PM
#36
Guest
Posts: n/a
Re: Putting two tow straps together???
Mike said it all, how could such a simple subject have generated so much
controversy. Oh, of course... this is the Internet.
Mike Romain wrote:
> Jim Gemmill wrote:
>
>>"Rusted" <no@email.com> wrote in message
>>news:L1Wpf.20281$Lj2.15179@fe13.usenetserver.com ...
>>
>>>bowlines don't slip, but put 8K of pulling power on them and they won't
>>
>>come
>>
>>>untied either.
>>>
>>>
>>>"Seahag" <Seahag@toadymail.net> wrote in message
>>>news:43a82af5_3@newsfeed.slurp.net...
>>>
>>>>Two bowlines?
>>>>
>>>>http://www.apparent-wind.com/knots/bowline/
>>>>
>>>>Seahag
>>>>
>>>>"4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
>>>>news:2dJpf.13208$wg4.4127@edtnps84...
>>>>
>>>>>Any safer means of attaching two straps together, than with a wooden
>>>>>doweling and still be able to get them apart??
>>>>>
>>>>>--
>>>>>Jeff '03 TJ & '95 ZJ
>>>>>http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
>>>>>http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
>>>>>
>>>>
>>>>
>>>
>>A bowline on a bite may be easier to untie after hard pull.
>>SEE http://www.netknots.com/html/boating_knots.html
>>for details
>>
>>
>
> If you make a knot, bowline or on a bight in a ****** strap that gets
> used to pull something out of mud say, better make it a pretty one
> because that knot will be very likely permanent.
>
> There 'is' a reason they put loops on ****** straps. The loop on the
> end is super easy to mate up with the loop on the next strap to make
> extensions. These even get pretty tight, so folks stick a dowel or
> stick in the mating area of the loops to help pry it open.
>
> It is easy. You hold the loop of the first strap up in the air and put
> the loop of the second strap 'over' it. You then take the far end of
> the second strap and pass it 'through' the loop of the first strap.
> This gives you a figure 8 knot that you can put a stick into to help it
> open later.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
> (More Off Road album links at bottom of the view page)
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
controversy. Oh, of course... this is the Internet.
Mike Romain wrote:
> Jim Gemmill wrote:
>
>>"Rusted" <no@email.com> wrote in message
>>news:L1Wpf.20281$Lj2.15179@fe13.usenetserver.com ...
>>
>>>bowlines don't slip, but put 8K of pulling power on them and they won't
>>
>>come
>>
>>>untied either.
>>>
>>>
>>>"Seahag" <Seahag@toadymail.net> wrote in message
>>>news:43a82af5_3@newsfeed.slurp.net...
>>>
>>>>Two bowlines?
>>>>
>>>>http://www.apparent-wind.com/knots/bowline/
>>>>
>>>>Seahag
>>>>
>>>>"4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
>>>>news:2dJpf.13208$wg4.4127@edtnps84...
>>>>
>>>>>Any safer means of attaching two straps together, than with a wooden
>>>>>doweling and still be able to get them apart??
>>>>>
>>>>>--
>>>>>Jeff '03 TJ & '95 ZJ
>>>>>http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
>>>>>http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
>>>>>
>>>>
>>>>
>>>
>>A bowline on a bite may be easier to untie after hard pull.
>>SEE http://www.netknots.com/html/boating_knots.html
>>for details
>>
>>
>
> If you make a knot, bowline or on a bight in a ****** strap that gets
> used to pull something out of mud say, better make it a pretty one
> because that knot will be very likely permanent.
>
> There 'is' a reason they put loops on ****** straps. The loop on the
> end is super easy to mate up with the loop on the next strap to make
> extensions. These even get pretty tight, so folks stick a dowel or
> stick in the mating area of the loops to help pry it open.
>
> It is easy. You hold the loop of the first strap up in the air and put
> the loop of the second strap 'over' it. You then take the far end of
> the second strap and pass it 'through' the loop of the first strap.
> This gives you a figure 8 knot that you can put a stick into to help it
> open later.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
> (More Off Road album links at bottom of the view page)
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
12-20-2005, 03:26 PM
#37
Guest
Posts: n/a
Re: Putting two tow straps together???
Mike said it all, how could such a simple subject have generated so much
controversy. Oh, of course... this is the Internet.
Mike Romain wrote:
> Jim Gemmill wrote:
>
>>"Rusted" <no@email.com> wrote in message
>>news:L1Wpf.20281$Lj2.15179@fe13.usenetserver.com ...
>>
>>>bowlines don't slip, but put 8K of pulling power on them and they won't
>>
>>come
>>
>>>untied either.
>>>
>>>
>>>"Seahag" <Seahag@toadymail.net> wrote in message
>>>news:43a82af5_3@newsfeed.slurp.net...
>>>
>>>>Two bowlines?
>>>>
>>>>http://www.apparent-wind.com/knots/bowline/
>>>>
>>>>Seahag
>>>>
>>>>"4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
>>>>news:2dJpf.13208$wg4.4127@edtnps84...
>>>>
>>>>>Any safer means of attaching two straps together, than with a wooden
>>>>>doweling and still be able to get them apart??
>>>>>
>>>>>--
>>>>>Jeff '03 TJ & '95 ZJ
>>>>>http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
>>>>>http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
>>>>>
>>>>
>>>>
>>>
>>A bowline on a bite may be easier to untie after hard pull.
>>SEE http://www.netknots.com/html/boating_knots.html
>>for details
>>
>>
>
> If you make a knot, bowline or on a bight in a ****** strap that gets
> used to pull something out of mud say, better make it a pretty one
> because that knot will be very likely permanent.
>
> There 'is' a reason they put loops on ****** straps. The loop on the
> end is super easy to mate up with the loop on the next strap to make
> extensions. These even get pretty tight, so folks stick a dowel or
> stick in the mating area of the loops to help pry it open.
>
> It is easy. You hold the loop of the first strap up in the air and put
> the loop of the second strap 'over' it. You then take the far end of
> the second strap and pass it 'through' the loop of the first strap.
> This gives you a figure 8 knot that you can put a stick into to help it
> open later.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
> (More Off Road album links at bottom of the view page)
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
controversy. Oh, of course... this is the Internet.
Mike Romain wrote:
> Jim Gemmill wrote:
>
>>"Rusted" <no@email.com> wrote in message
>>news:L1Wpf.20281$Lj2.15179@fe13.usenetserver.com ...
>>
>>>bowlines don't slip, but put 8K of pulling power on them and they won't
>>
>>come
>>
>>>untied either.
>>>
>>>
>>>"Seahag" <Seahag@toadymail.net> wrote in message
>>>news:43a82af5_3@newsfeed.slurp.net...
>>>
>>>>Two bowlines?
>>>>
>>>>http://www.apparent-wind.com/knots/bowline/
>>>>
>>>>Seahag
>>>>
>>>>"4X4PLAY" <jrhiltz@eastlink.ca> wrote in message
>>>>news:2dJpf.13208$wg4.4127@edtnps84...
>>>>
>>>>>Any safer means of attaching two straps together, than with a wooden
>>>>>doweling and still be able to get them apart??
>>>>>
>>>>>--
>>>>>Jeff '03 TJ & '95 ZJ
>>>>>http://img400.imageshack.us/img400/554/gardenpic0lh.jpg
>>>>>http://img477.imageshack.us/img477/4696/jeepsgif3iq.gif
>>>>>
>>>>
>>>>
>>>
>>A bowline on a bite may be easier to untie after hard pull.
>>SEE http://www.netknots.com/html/boating_knots.html
>>for details
>>
>>
>
> If you make a knot, bowline or on a bight in a ****** strap that gets
> used to pull something out of mud say, better make it a pretty one
> because that knot will be very likely permanent.
>
> There 'is' a reason they put loops on ****** straps. The loop on the
> end is super easy to mate up with the loop on the next strap to make
> extensions. These even get pretty tight, so folks stick a dowel or
> stick in the mating area of the loops to help pry it open.
>
> It is easy. You hold the loop of the first strap up in the air and put
> the loop of the second strap 'over' it. You then take the far end of
> the second strap and pass it 'through' the loop of the first strap.
> This gives you a figure 8 knot that you can put a stick into to help it
> open later.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Aug./05 http://www.imagestation.com/album/in...?id=2120343242
> (More Off Road album links at bottom of the view page)
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
12-20-2005, 04:02 PM
#38
Guest
Posts: n/a
Re: Putting two tow straps together???
http://www.----------.com/temp/TowStrapBreakshort.mpg
God Bless America, Bill O|||||||O
mailto:--------------------
Carl wrote:
>
> D-shackle, if they have loop ends.
>
> Carl
God Bless America, Bill O|||||||O
mailto:--------------------
Carl wrote:
>
> D-shackle, if they have loop ends.
>
> Carl
12-20-2005, 04:02 PM
#39
Guest
Posts: n/a
Re: Putting two tow straps together???
http://www.----------.com/temp/TowStrapBreakshort.mpg
God Bless America, Bill O|||||||O
mailto:--------------------
Carl wrote:
>
> D-shackle, if they have loop ends.
>
> Carl
God Bless America, Bill O|||||||O
mailto:--------------------
Carl wrote:
>
> D-shackle, if they have loop ends.
>
> Carl
12-20-2005, 04:02 PM
#40
Guest
Posts: n/a
Re: Putting two tow straps together???
http://www.----------.com/temp/TowStrapBreakshort.mpg
God Bless America, Bill O|||||||O
mailto:--------------------
Carl wrote:
>
> D-shackle, if they have loop ends.
>
> Carl
God Bless America, Bill O|||||||O
mailto:--------------------
Carl wrote:
>
> D-shackle, if they have loop ends.
>
> Carl
