Putting in front speakers for jeep wrangler
01-19-2006, 07:38 AM
#21
Guest
Posts: n/a
Re: Putting in front speakers for jeep wrangler
In article <5a74769e4c8ad@uwe>, Jeff via CarKB.com <u16314@uwe> wrote:
#I have a 93 jeep wrangler and my front two speakers do not work. So i took
#out the old ones. The passenger side speaker was easy but the driver side one
#was about impossible to take out. with out removing the dash I finally got it
#out and was wondering if there is an easier way to put the new one in on the
#driver side.
I used wing nuts when installing the front speakers on my YJ. It made
life a lot easier than trying to fit a nut driver up in there.
/herb
#I have a 93 jeep wrangler and my front two speakers do not work. So i took
#out the old ones. The passenger side speaker was easy but the driver side one
#was about impossible to take out. with out removing the dash I finally got it
#out and was wondering if there is an easier way to put the new one in on the
#driver side.
I used wing nuts when installing the front speakers on my YJ. It made
life a lot easier than trying to fit a nut driver up in there.
/herb
01-19-2006, 07:38 AM
#22
Guest
Posts: n/a
Re: Putting in front speakers for jeep wrangler
In article <5a74769e4c8ad@uwe>, Jeff via CarKB.com <u16314@uwe> wrote:
#I have a 93 jeep wrangler and my front two speakers do not work. So i took
#out the old ones. The passenger side speaker was easy but the driver side one
#was about impossible to take out. with out removing the dash I finally got it
#out and was wondering if there is an easier way to put the new one in on the
#driver side.
I used wing nuts when installing the front speakers on my YJ. It made
life a lot easier than trying to fit a nut driver up in there.
/herb
#I have a 93 jeep wrangler and my front two speakers do not work. So i took
#out the old ones. The passenger side speaker was easy but the driver side one
#was about impossible to take out. with out removing the dash I finally got it
#out and was wondering if there is an easier way to put the new one in on the
#driver side.
I used wing nuts when installing the front speakers on my YJ. It made
life a lot easier than trying to fit a nut driver up in there.
/herb
01-19-2006, 08:54 PM
#23
Guest
Posts: n/a
Re: Putting in front speakers for jeep wrangler
Thanks everyone for your information i finally got my speakers in. I used the
method someone else metioned by taking the bolts off the driver side and then
put the end off a screw drive and using wingnuts to tighten the speakers down.
Thanks so much everybody for your info on this project!!
Jeff
--
Message posted via http://www.carkb.com
method someone else metioned by taking the bolts off the driver side and then
put the end off a screw drive and using wingnuts to tighten the speakers down.
Thanks so much everybody for your info on this project!!
Jeff
--
Message posted via http://www.carkb.com
01-19-2006, 08:54 PM
#24
Guest
Posts: n/a
Re: Putting in front speakers for jeep wrangler
Thanks everyone for your information i finally got my speakers in. I used the
method someone else metioned by taking the bolts off the driver side and then
put the end off a screw drive and using wingnuts to tighten the speakers down.
Thanks so much everybody for your info on this project!!
Jeff
--
Message posted via http://www.carkb.com
method someone else metioned by taking the bolts off the driver side and then
put the end off a screw drive and using wingnuts to tighten the speakers down.
Thanks so much everybody for your info on this project!!
Jeff
--
Message posted via http://www.carkb.com
01-19-2006, 08:54 PM
#25
Guest
Posts: n/a
Re: Putting in front speakers for jeep wrangler
Thanks everyone for your information i finally got my speakers in. I used the
method someone else metioned by taking the bolts off the driver side and then
put the end off a screw drive and using wingnuts to tighten the speakers down.
Thanks so much everybody for your info on this project!!
Jeff
--
Message posted via http://www.carkb.com
method someone else metioned by taking the bolts off the driver side and then
put the end off a screw drive and using wingnuts to tighten the speakers down.
Thanks so much everybody for your info on this project!!
Jeff
--
Message posted via http://www.carkb.com
Thread
Thread Starter
Forum
Replies
Last Post
BassClefJeeper
Jeep Mailing List
12
01-08-2005 06:23 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)