Dropped it on it's side. You gotta love the boy ...

How ya doin JohnEJeep?




"John in Vegas" <johnina99tj@netscape.net> wrote in message
news:KvBAf.11309$eR.8708@fed1read03...
> No more White Trash, it fell victim to the somebody made me an offer that
> at the time was prudent to accept. When the situation improved, I replaced
> W/T with a 98 GC, but Im not allowed to drive it offroad (but she isnt
> with me all the time haha)
> I still have the 99 tj and it now is locked F/R with the atlas t-case and
> 4.88 gears. My son was driving it about 1.5-2 yrs ago and flopped it on
> its side, I cried for days.
>
> John in Vegas
>
> Jerry Bransford wrote:
>
>> Hiya John, I thought you fell off the face of the earth! You still have
>> White Trash?
>>
>> John in Vegas wrote:
>>
>>> well I got them. I just used some penetrating oil and a sledge and to
>>> install i used the impact with a spacer. oh well, I guess that diff oil
>>> needed to be changed anyway,it had about 6k on it.
>>>
>>> John in Vegas
>>>
>>> Mike Romain wrote:
>>>
>>>> Hey John, how's it going?
>>>>
>>>> I am not sure, but can't you just take the drum off and pop the studs
>>>> out with a C-clamp and large socket to catch the stud or a hand vise
>>>> and
>>>> socket? I don't think I would want to hammer them out, but...
>>>>
>>>> My 44's axles also just unbolt from the outside, no slide hammer
>>>> needed.
>>>>
>>>> Mike
>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> 88 Cherokee 235 BFG AT's
>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>>> (More Off Road album links at bottom of the view page)
>>>>
>>>> John in Vegas wrote:
>>>>
>>>>> I have a 99tj with D44 and a detroit in it. I need to pull the axle
>>>>> shaft to replace the wheel studs. I could use some info on going
>>>>> about
>>>>> this. I cant see where there would be any C clips on the detoit, so I
>>>>> wanted to check with you guys before I start to try to slide hammer
>>>>> the
>>>>> axle out.
>>>>> Been a long time since I was on here.
>>>>> Thanks
>>>>>
>>>>> John in Vegas
>>>
>>>
>>>
>>
>

 

well i guess thats why i couldnt find them.

John in Vegas

Jeff Strickland wrote:
> If you really have a D44, you don't have any c-clips anyway.
>
>
>
>
>
> "John in Vegas" <johnina99tj@netscape.net> wrote in message
> news:UHwAf.11278$eR.3778@fed1read03...
>
>> I have a 99tj with D44 and a detroit in it. I need to pull the axle
>> shaft to replace the wheel studs. I could use some info on going
>> about this. I cant see where there would be any C clips on the
>> detoit, so I wanted to check with you guys before I start to try to
>> slide hammer the axle out.
>> Been a long time since I was on here.
>> Thanks
>>
>> John in Vegas
>>
>

 

well i guess thats why i couldnt find them.

John in Vegas

Jeff Strickland wrote:
> If you really have a D44, you don't have any c-clips anyway.
>
>
>
>
>
> "John in Vegas" <johnina99tj@netscape.net> wrote in message
> news:UHwAf.11278$eR.3778@fed1read03...
>
>> I have a 99tj with D44 and a detroit in it. I need to pull the axle
>> shaft to replace the wheel studs. I could use some info on going
>> about this. I cant see where there would be any C clips on the
>> detoit, so I wanted to check with you guys before I start to try to
>> slide hammer the axle out.
>> Been a long time since I was on here.
>> Thanks
>>
>> John in Vegas
>>
>

 

well i guess thats why i couldnt find them.

John in Vegas

Jeff Strickland wrote:
> If you really have a D44, you don't have any c-clips anyway.
>
>
>
>
>
> "John in Vegas" <johnina99tj@netscape.net> wrote in message
> news:UHwAf.11278$eR.3778@fed1read03...
>
>> I have a 99tj with D44 and a detroit in it. I need to pull the axle
>> shaft to replace the wheel studs. I could use some info on going
>> about this. I cant see where there would be any C clips on the
>> detoit, so I wanted to check with you guys before I start to try to
>> slide hammer the axle out.
>> Been a long time since I was on here.
>> Thanks
>>
>> John in Vegas
>>
>

 

doing great. The boys b-day is tomarrow and I got him a yamaha ttr90 (
the X called child protective services on me for that little flop. They
said quads and motorcycles were ok, JEEPs again and Ill be hearing from
them again)) to keep him in the dirt. What can a dad do?

John in Vegas

Jeff Strickland wrote:

> Dropped it on it's side. You gotta love the boy ...
>
> How ya doin JohnEJeep?
>
>
>
>
> "John in Vegas" <johnina99tj@netscape.net> wrote in message
> news:KvBAf.11309$eR.8708@fed1read03...
>
>> No more White Trash, it fell victim to the somebody made me an offer
>> that at the time was prudent to accept. When the situation improved, I
>> replaced W/T with a 98 GC, but Im not allowed to drive it offroad (but
>> she isnt with me all the time haha)
>> I still have the 99 tj and it now is locked F/R with the atlas t-case
>> and 4.88 gears. My son was driving it about 1.5-2 yrs ago and
>> flopped it on its side, I cried for days.
>>
>> John in Vegas
>>
>> Jerry Bransford wrote:
>>
>>> Hiya John, I thought you fell off the face of the earth! You still
>>> have White Trash?
>>>
>>> John in Vegas wrote:
>>>
>>>> well I got them. I just used some penetrating oil and a sledge and
>>>> to install i used the impact with a spacer. oh well, I guess that
>>>> diff oil needed to be changed anyway,it had about 6k on it.
>>>>
>>>> John in Vegas
>>>>
>>>> Mike Romain wrote:
>>>>
>>>>> Hey John, how's it going?
>>>>>
>>>>> I am not sure, but can't you just take the drum off and pop the studs
>>>>> out with a C-clamp and large socket to catch the stud or a hand
>>>>> vise and
>>>>> socket? I don't think I would want to hammer them out, but...
>>>>>
>>>>> My 44's axles also just unbolt from the outside, no slide hammer
>>>>> needed.
>>>>>
>>>>> Mike
>>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>>> 88 Cherokee 235 BFG AT's
>>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>>>> (More Off Road album links at bottom of the view page)
>>>>>
>>>>> John in Vegas wrote:
>>>>>
>>>>>> I have a 99tj with D44 and a detroit in it. I need to pull the axle
>>>>>> shaft to replace the wheel studs. I could use some info on going
>>>>>> about
>>>>>> this. I cant see where there would be any C clips on the detoit,
>>>>>> so I
>>>>>> wanted to check with you guys before I start to try to slide
>>>>>> hammer the
>>>>>> axle out.
>>>>>> Been a long time since I was on here.
>>>>>> Thanks
>>>>>>
>>>>>> John in Vegas
>>>>
>>>>
>>>>
>>>>
>>>
>>
>

 

doing great. The boys b-day is tomarrow and I got him a yamaha ttr90 (
the X called child protective services on me for that little flop. They
said quads and motorcycles were ok, JEEPs again and Ill be hearing from
them again)) to keep him in the dirt. What can a dad do?

John in Vegas

Jeff Strickland wrote:

> Dropped it on it's side. You gotta love the boy ...
>
> How ya doin JohnEJeep?
>
>
>
>
> "John in Vegas" <johnina99tj@netscape.net> wrote in message
> news:KvBAf.11309$eR.8708@fed1read03...
>
>> No more White Trash, it fell victim to the somebody made me an offer
>> that at the time was prudent to accept. When the situation improved, I
>> replaced W/T with a 98 GC, but Im not allowed to drive it offroad (but
>> she isnt with me all the time haha)
>> I still have the 99 tj and it now is locked F/R with the atlas t-case
>> and 4.88 gears. My son was driving it about 1.5-2 yrs ago and
>> flopped it on its side, I cried for days.
>>
>> John in Vegas
>>
>> Jerry Bransford wrote:
>>
>>> Hiya John, I thought you fell off the face of the earth! You still
>>> have White Trash?
>>>
>>> John in Vegas wrote:
>>>
>>>> well I got them. I just used some penetrating oil and a sledge and
>>>> to install i used the impact with a spacer. oh well, I guess that
>>>> diff oil needed to be changed anyway,it had about 6k on it.
>>>>
>>>> John in Vegas
>>>>
>>>> Mike Romain wrote:
>>>>
>>>>> Hey John, how's it going?
>>>>>
>>>>> I am not sure, but can't you just take the drum off and pop the studs
>>>>> out with a C-clamp and large socket to catch the stud or a hand
>>>>> vise and
>>>>> socket? I don't think I would want to hammer them out, but...
>>>>>
>>>>> My 44's axles also just unbolt from the outside, no slide hammer
>>>>> needed.
>>>>>
>>>>> Mike
>>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>>> 88 Cherokee 235 BFG AT's
>>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>>>> (More Off Road album links at bottom of the view page)
>>>>>
>>>>> John in Vegas wrote:
>>>>>
>>>>>> I have a 99tj with D44 and a detroit in it. I need to pull the axle
>>>>>> shaft to replace the wheel studs. I could use some info on going
>>>>>> about
>>>>>> this. I cant see where there would be any C clips on the detoit,
>>>>>> so I
>>>>>> wanted to check with you guys before I start to try to slide
>>>>>> hammer the
>>>>>> axle out.
>>>>>> Been a long time since I was on here.
>>>>>> Thanks
>>>>>>
>>>>>> John in Vegas
>>>>
>>>>
>>>>
>>>>
>>>
>>
>

 

doing great. The boys b-day is tomarrow and I got him a yamaha ttr90 (
the X called child protective services on me for that little flop. They
said quads and motorcycles were ok, JEEPs again and Ill be hearing from
them again)) to keep him in the dirt. What can a dad do?

John in Vegas

Jeff Strickland wrote:

> Dropped it on it's side. You gotta love the boy ...
>
> How ya doin JohnEJeep?
>
>
>
>
> "John in Vegas" <johnina99tj@netscape.net> wrote in message
> news:KvBAf.11309$eR.8708@fed1read03...
>
>> No more White Trash, it fell victim to the somebody made me an offer
>> that at the time was prudent to accept. When the situation improved, I
>> replaced W/T with a 98 GC, but Im not allowed to drive it offroad (but
>> she isnt with me all the time haha)
>> I still have the 99 tj and it now is locked F/R with the atlas t-case
>> and 4.88 gears. My son was driving it about 1.5-2 yrs ago and
>> flopped it on its side, I cried for days.
>>
>> John in Vegas
>>
>> Jerry Bransford wrote:
>>
>>> Hiya John, I thought you fell off the face of the earth! You still
>>> have White Trash?
>>>
>>> John in Vegas wrote:
>>>
>>>> well I got them. I just used some penetrating oil and a sledge and
>>>> to install i used the impact with a spacer. oh well, I guess that
>>>> diff oil needed to be changed anyway,it had about 6k on it.
>>>>
>>>> John in Vegas
>>>>
>>>> Mike Romain wrote:
>>>>
>>>>> Hey John, how's it going?
>>>>>
>>>>> I am not sure, but can't you just take the drum off and pop the studs
>>>>> out with a C-clamp and large socket to catch the stud or a hand
>>>>> vise and
>>>>> socket? I don't think I would want to hammer them out, but...
>>>>>
>>>>> My 44's axles also just unbolt from the outside, no slide hammer
>>>>> needed.
>>>>>
>>>>> Mike
>>>>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>>> 88 Cherokee 235 BFG AT's
>>>>> Canadian Off Road Trips Photos: Non members can still view!
>>>>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>>>>> (More Off Road album links at bottom of the view page)
>>>>>
>>>>> John in Vegas wrote:
>>>>>
>>>>>> I have a 99tj with D44 and a detroit in it. I need to pull the axle
>>>>>> shaft to replace the wheel studs. I could use some info on going
>>>>>> about
>>>>>> this. I cant see where there would be any C clips on the detoit,
>>>>>> so I
>>>>>> wanted to check with you guys before I start to try to slide
>>>>>> hammer the
>>>>>> axle out.
>>>>>> Been a long time since I was on here.
>>>>>> Thanks
>>>>>>
>>>>>> John in Vegas
>>>>
>>>>
>>>>
>>>>
>>>
>>
>