Problems shifting gears in 92 Jeep wrangler
08-03-2007, 03:27 PM
#11
Guest
Posts: n/a
Re: Re: Problems shifting gears in 92 Jeep wrangler
Another easy thing to check is the bell house to engine bolts, freind has
had his come loose twice on his YJ.
"SnoMan" <admin@snoman.com> wrote in message
news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
> <jeep@_removethisbit_milne.info> wrote:
>
>>Are you driving it in 4x4 on tarmac ?
>>
>>Dave
>
> Good point but I think I would also start by changing tranny fluid as
> many neglect this.
>
>>
>><bgambart@hotmail.com> wrote in message
>>news:1186146158.865744.148820@57g2000hsv.googleg roups.com...
>>> Hi there,
>>>
>>> I have problems shifting gears. It starts out fine, but after a while
>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>> cannot get out of it. If this happens while I am stationary not even
>>> the breaks can keep the jeep from moving forward. The drive train is
>>> making a little more noise a high speeds as well. Do I need to change
>>> the oil in the tranny, or is this something wrong with the clutch????
>>>
>>>
>>> Any help with this will be greately appreciated.
>>> Thanks
>>>
>>
> -----------------
> TheSnoMan.com
had his come loose twice on his YJ.
"SnoMan" <admin@snoman.com> wrote in message
news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
> <jeep@_removethisbit_milne.info> wrote:
>
>>Are you driving it in 4x4 on tarmac ?
>>
>>Dave
>
> Good point but I think I would also start by changing tranny fluid as
> many neglect this.
>
>>
>><bgambart@hotmail.com> wrote in message
>>news:1186146158.865744.148820@57g2000hsv.googleg roups.com...
>>> Hi there,
>>>
>>> I have problems shifting gears. It starts out fine, but after a while
>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>> cannot get out of it. If this happens while I am stationary not even
>>> the breaks can keep the jeep from moving forward. The drive train is
>>> making a little more noise a high speeds as well. Do I need to change
>>> the oil in the tranny, or is this something wrong with the clutch????
>>>
>>>
>>> Any help with this will be greately appreciated.
>>> Thanks
>>>
>>
> -----------------
> TheSnoMan.com
08-03-2007, 03:27 PM
#12
Guest
Posts: n/a
Re: Re: Problems shifting gears in 92 Jeep wrangler
Another easy thing to check is the bell house to engine bolts, freind has
had his come loose twice on his YJ.
"SnoMan" <admin@snoman.com> wrote in message
news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
> <jeep@_removethisbit_milne.info> wrote:
>
>>Are you driving it in 4x4 on tarmac ?
>>
>>Dave
>
> Good point but I think I would also start by changing tranny fluid as
> many neglect this.
>
>>
>><bgambart@hotmail.com> wrote in message
>>news:1186146158.865744.148820@57g2000hsv.googleg roups.com...
>>> Hi there,
>>>
>>> I have problems shifting gears. It starts out fine, but after a while
>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>> cannot get out of it. If this happens while I am stationary not even
>>> the breaks can keep the jeep from moving forward. The drive train is
>>> making a little more noise a high speeds as well. Do I need to change
>>> the oil in the tranny, or is this something wrong with the clutch????
>>>
>>>
>>> Any help with this will be greately appreciated.
>>> Thanks
>>>
>>
> -----------------
> TheSnoMan.com
had his come loose twice on his YJ.
"SnoMan" <admin@snoman.com> wrote in message
news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
> <jeep@_removethisbit_milne.info> wrote:
>
>>Are you driving it in 4x4 on tarmac ?
>>
>>Dave
>
> Good point but I think I would also start by changing tranny fluid as
> many neglect this.
>
>>
>><bgambart@hotmail.com> wrote in message
>>news:1186146158.865744.148820@57g2000hsv.googleg roups.com...
>>> Hi there,
>>>
>>> I have problems shifting gears. It starts out fine, but after a while
>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>> cannot get out of it. If this happens while I am stationary not even
>>> the breaks can keep the jeep from moving forward. The drive train is
>>> making a little more noise a high speeds as well. Do I need to change
>>> the oil in the tranny, or is this something wrong with the clutch????
>>>
>>>
>>> Any help with this will be greately appreciated.
>>> Thanks
>>>
>>
> -----------------
> TheSnoMan.com
08-03-2007, 03:27 PM
#13
Guest
Posts: n/a
Re: Re: Problems shifting gears in 92 Jeep wrangler
Another easy thing to check is the bell house to engine bolts, freind has
had his come loose twice on his YJ.
"SnoMan" <admin@snoman.com> wrote in message
news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
> <jeep@_removethisbit_milne.info> wrote:
>
>>Are you driving it in 4x4 on tarmac ?
>>
>>Dave
>
> Good point but I think I would also start by changing tranny fluid as
> many neglect this.
>
>>
>><bgambart@hotmail.com> wrote in message
>>news:1186146158.865744.148820@57g2000hsv.googleg roups.com...
>>> Hi there,
>>>
>>> I have problems shifting gears. It starts out fine, but after a while
>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>> cannot get out of it. If this happens while I am stationary not even
>>> the breaks can keep the jeep from moving forward. The drive train is
>>> making a little more noise a high speeds as well. Do I need to change
>>> the oil in the tranny, or is this something wrong with the clutch????
>>>
>>>
>>> Any help with this will be greately appreciated.
>>> Thanks
>>>
>>
> -----------------
> TheSnoMan.com
had his come loose twice on his YJ.
"SnoMan" <admin@snoman.com> wrote in message
news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
> <jeep@_removethisbit_milne.info> wrote:
>
>>Are you driving it in 4x4 on tarmac ?
>>
>>Dave
>
> Good point but I think I would also start by changing tranny fluid as
> many neglect this.
>
>>
>><bgambart@hotmail.com> wrote in message
>>news:1186146158.865744.148820@57g2000hsv.googleg roups.com...
>>> Hi there,
>>>
>>> I have problems shifting gears. It starts out fine, but after a while
>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>> cannot get out of it. If this happens while I am stationary not even
>>> the breaks can keep the jeep from moving forward. The drive train is
>>> making a little more noise a high speeds as well. Do I need to change
>>> the oil in the tranny, or is this something wrong with the clutch????
>>>
>>>
>>> Any help with this will be greately appreciated.
>>> Thanks
>>>
>>
> -----------------
> TheSnoMan.com
08-07-2007, 11:24 AM
#14
Guest
Posts: n/a
Re: Problems shifting gears in 92 Jeep wrangler
Lets see, there is a tool called a TORQUE WRENCH?
Greg wrote:
> Another easy thing to check is the bell house to engine bolts, freind has
> had his come loose twice on his YJ.
>
> "SnoMan" <admin@snoman.com> wrote in message
> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>> <jeep@_removethisbit_milne.info> wrote:
>>
>>> Are you driving it in 4x4 on tarmac ?
>>>
>>> Dave
>> Good point but I think I would also start by changing tranny fluid as
>> many neglect this.
>>
>>> <bgambart@hotmail.com> wrote in message
>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>> Hi there,
>>>>
>>>> I have problems shifting gears. It starts out fine, but after a while
>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>> cannot get out of it. If this happens while I am stationary not even
>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>> making a little more noise a high speeds as well. Do I need to change
>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>
>>>>
>>>> Any help with this will be greately appreciated.
>>>> Thanks
>>>>
>> -----------------
>> TheSnoMan.com
>
>
Greg wrote:
> Another easy thing to check is the bell house to engine bolts, freind has
> had his come loose twice on his YJ.
>
> "SnoMan" <admin@snoman.com> wrote in message
> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>> <jeep@_removethisbit_milne.info> wrote:
>>
>>> Are you driving it in 4x4 on tarmac ?
>>>
>>> Dave
>> Good point but I think I would also start by changing tranny fluid as
>> many neglect this.
>>
>>> <bgambart@hotmail.com> wrote in message
>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>> Hi there,
>>>>
>>>> I have problems shifting gears. It starts out fine, but after a while
>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>> cannot get out of it. If this happens while I am stationary not even
>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>> making a little more noise a high speeds as well. Do I need to change
>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>
>>>>
>>>> Any help with this will be greately appreciated.
>>>> Thanks
>>>>
>> -----------------
>> TheSnoMan.com
>
>
08-07-2007, 11:24 AM
#15
Guest
Posts: n/a
Re: Problems shifting gears in 92 Jeep wrangler
Lets see, there is a tool called a TORQUE WRENCH?
Greg wrote:
> Another easy thing to check is the bell house to engine bolts, freind has
> had his come loose twice on his YJ.
>
> "SnoMan" <admin@snoman.com> wrote in message
> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>> <jeep@_removethisbit_milne.info> wrote:
>>
>>> Are you driving it in 4x4 on tarmac ?
>>>
>>> Dave
>> Good point but I think I would also start by changing tranny fluid as
>> many neglect this.
>>
>>> <bgambart@hotmail.com> wrote in message
>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>> Hi there,
>>>>
>>>> I have problems shifting gears. It starts out fine, but after a while
>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>> cannot get out of it. If this happens while I am stationary not even
>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>> making a little more noise a high speeds as well. Do I need to change
>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>
>>>>
>>>> Any help with this will be greately appreciated.
>>>> Thanks
>>>>
>> -----------------
>> TheSnoMan.com
>
>
Greg wrote:
> Another easy thing to check is the bell house to engine bolts, freind has
> had his come loose twice on his YJ.
>
> "SnoMan" <admin@snoman.com> wrote in message
> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>> <jeep@_removethisbit_milne.info> wrote:
>>
>>> Are you driving it in 4x4 on tarmac ?
>>>
>>> Dave
>> Good point but I think I would also start by changing tranny fluid as
>> many neglect this.
>>
>>> <bgambart@hotmail.com> wrote in message
>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>> Hi there,
>>>>
>>>> I have problems shifting gears. It starts out fine, but after a while
>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>> cannot get out of it. If this happens while I am stationary not even
>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>> making a little more noise a high speeds as well. Do I need to change
>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>
>>>>
>>>> Any help with this will be greately appreciated.
>>>> Thanks
>>>>
>> -----------------
>> TheSnoMan.com
>
>
08-07-2007, 11:24 AM
#16
Guest
Posts: n/a
Re: Problems shifting gears in 92 Jeep wrangler
Lets see, there is a tool called a TORQUE WRENCH?
Greg wrote:
> Another easy thing to check is the bell house to engine bolts, freind has
> had his come loose twice on his YJ.
>
> "SnoMan" <admin@snoman.com> wrote in message
> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>> <jeep@_removethisbit_milne.info> wrote:
>>
>>> Are you driving it in 4x4 on tarmac ?
>>>
>>> Dave
>> Good point but I think I would also start by changing tranny fluid as
>> many neglect this.
>>
>>> <bgambart@hotmail.com> wrote in message
>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>> Hi there,
>>>>
>>>> I have problems shifting gears. It starts out fine, but after a while
>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>> cannot get out of it. If this happens while I am stationary not even
>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>> making a little more noise a high speeds as well. Do I need to change
>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>
>>>>
>>>> Any help with this will be greately appreciated.
>>>> Thanks
>>>>
>> -----------------
>> TheSnoMan.com
>
>
Greg wrote:
> Another easy thing to check is the bell house to engine bolts, freind has
> had his come loose twice on his YJ.
>
> "SnoMan" <admin@snoman.com> wrote in message
> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>> <jeep@_removethisbit_milne.info> wrote:
>>
>>> Are you driving it in 4x4 on tarmac ?
>>>
>>> Dave
>> Good point but I think I would also start by changing tranny fluid as
>> many neglect this.
>>
>>> <bgambart@hotmail.com> wrote in message
>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>> Hi there,
>>>>
>>>> I have problems shifting gears. It starts out fine, but after a while
>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>> cannot get out of it. If this happens while I am stationary not even
>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>> making a little more noise a high speeds as well. Do I need to change
>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>
>>>>
>>>> Any help with this will be greately appreciated.
>>>> Thanks
>>>>
>> -----------------
>> TheSnoMan.com
>
>
08-07-2007, 11:24 AM
#17
Guest
Posts: n/a
Re: Problems shifting gears in 92 Jeep wrangler
Lets see, there is a tool called a TORQUE WRENCH?
Greg wrote:
> Another easy thing to check is the bell house to engine bolts, freind has
> had his come loose twice on his YJ.
>
> "SnoMan" <admin@snoman.com> wrote in message
> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>> <jeep@_removethisbit_milne.info> wrote:
>>
>>> Are you driving it in 4x4 on tarmac ?
>>>
>>> Dave
>> Good point but I think I would also start by changing tranny fluid as
>> many neglect this.
>>
>>> <bgambart@hotmail.com> wrote in message
>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>> Hi there,
>>>>
>>>> I have problems shifting gears. It starts out fine, but after a while
>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>> cannot get out of it. If this happens while I am stationary not even
>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>> making a little more noise a high speeds as well. Do I need to change
>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>
>>>>
>>>> Any help with this will be greately appreciated.
>>>> Thanks
>>>>
>> -----------------
>> TheSnoMan.com
>
>
Greg wrote:
> Another easy thing to check is the bell house to engine bolts, freind has
> had his come loose twice on his YJ.
>
> "SnoMan" <admin@snoman.com> wrote in message
> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>> <jeep@_removethisbit_milne.info> wrote:
>>
>>> Are you driving it in 4x4 on tarmac ?
>>>
>>> Dave
>> Good point but I think I would also start by changing tranny fluid as
>> many neglect this.
>>
>>> <bgambart@hotmail.com> wrote in message
>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>> Hi there,
>>>>
>>>> I have problems shifting gears. It starts out fine, but after a while
>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>> cannot get out of it. If this happens while I am stationary not even
>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>> making a little more noise a high speeds as well. Do I need to change
>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>
>>>>
>>>> Any help with this will be greately appreciated.
>>>> Thanks
>>>>
>> -----------------
>> TheSnoMan.com
>
>
08-07-2007, 11:47 AM
#18
Guest
Posts: n/a
Re: Problems shifting gears in 92 Jeep wrangler
A torque wrench prevents bolts from coming out now?
I always thought it was for tightening bolts to a certain degree. Silly me,
I've been using thread lock all these years with the torque wrench and all I
needed was the wrench.
"RoyJ" <spamless@microsoft.net> wrote in message
news:v80ui.14952$zA4.13530@newsread3.news.pas.eart hlink.net...
> Lets see, there is a tool called a TORQUE WRENCH?
>
> Greg wrote:
>> Another easy thing to check is the bell house to engine bolts, freind
>> has had his come loose twice on his YJ.
>>
>> "SnoMan" <admin@snoman.com> wrote in message
>> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>>> <jeep@_removethisbit_milne.info> wrote:
>>>
>>>> Are you driving it in 4x4 on tarmac ?
>>>>
>>>> Dave
>>> Good point but I think I would also start by changing tranny fluid as
>>> many neglect this.
>>>
>>>> <bgambart@hotmail.com> wrote in message
>>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>>> Hi there,
>>>>>
>>>>> I have problems shifting gears. It starts out fine, but after a while
>>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>>> cannot get out of it. If this happens while I am stationary not even
>>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>>> making a little more noise a high speeds as well. Do I need to change
>>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>>
>>>>>
>>>>> Any help with this will be greately appreciated.
>>>>> Thanks
>>>>>
>>> -----------------
>>> TheSnoMan.com
>>
I always thought it was for tightening bolts to a certain degree. Silly me,
I've been using thread lock all these years with the torque wrench and all I
needed was the wrench.
"RoyJ" <spamless@microsoft.net> wrote in message
news:v80ui.14952$zA4.13530@newsread3.news.pas.eart hlink.net...
> Lets see, there is a tool called a TORQUE WRENCH?
>
> Greg wrote:
>> Another easy thing to check is the bell house to engine bolts, freind
>> has had his come loose twice on his YJ.
>>
>> "SnoMan" <admin@snoman.com> wrote in message
>> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>>> <jeep@_removethisbit_milne.info> wrote:
>>>
>>>> Are you driving it in 4x4 on tarmac ?
>>>>
>>>> Dave
>>> Good point but I think I would also start by changing tranny fluid as
>>> many neglect this.
>>>
>>>> <bgambart@hotmail.com> wrote in message
>>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>>> Hi there,
>>>>>
>>>>> I have problems shifting gears. It starts out fine, but after a while
>>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>>> cannot get out of it. If this happens while I am stationary not even
>>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>>> making a little more noise a high speeds as well. Do I need to change
>>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>>
>>>>>
>>>>> Any help with this will be greately appreciated.
>>>>> Thanks
>>>>>
>>> -----------------
>>> TheSnoMan.com
>>
08-07-2007, 11:47 AM
#19
Guest
Posts: n/a
Re: Problems shifting gears in 92 Jeep wrangler
A torque wrench prevents bolts from coming out now?
I always thought it was for tightening bolts to a certain degree. Silly me,
I've been using thread lock all these years with the torque wrench and all I
needed was the wrench.
"RoyJ" <spamless@microsoft.net> wrote in message
news:v80ui.14952$zA4.13530@newsread3.news.pas.eart hlink.net...
> Lets see, there is a tool called a TORQUE WRENCH?
>
> Greg wrote:
>> Another easy thing to check is the bell house to engine bolts, freind
>> has had his come loose twice on his YJ.
>>
>> "SnoMan" <admin@snoman.com> wrote in message
>> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>>> <jeep@_removethisbit_milne.info> wrote:
>>>
>>>> Are you driving it in 4x4 on tarmac ?
>>>>
>>>> Dave
>>> Good point but I think I would also start by changing tranny fluid as
>>> many neglect this.
>>>
>>>> <bgambart@hotmail.com> wrote in message
>>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>>> Hi there,
>>>>>
>>>>> I have problems shifting gears. It starts out fine, but after a while
>>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>>> cannot get out of it. If this happens while I am stationary not even
>>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>>> making a little more noise a high speeds as well. Do I need to change
>>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>>
>>>>>
>>>>> Any help with this will be greately appreciated.
>>>>> Thanks
>>>>>
>>> -----------------
>>> TheSnoMan.com
>>
I always thought it was for tightening bolts to a certain degree. Silly me,
I've been using thread lock all these years with the torque wrench and all I
needed was the wrench.
"RoyJ" <spamless@microsoft.net> wrote in message
news:v80ui.14952$zA4.13530@newsread3.news.pas.eart hlink.net...
> Lets see, there is a tool called a TORQUE WRENCH?
>
> Greg wrote:
>> Another easy thing to check is the bell house to engine bolts, freind
>> has had his come loose twice on his YJ.
>>
>> "SnoMan" <admin@snoman.com> wrote in message
>> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>>> <jeep@_removethisbit_milne.info> wrote:
>>>
>>>> Are you driving it in 4x4 on tarmac ?
>>>>
>>>> Dave
>>> Good point but I think I would also start by changing tranny fluid as
>>> many neglect this.
>>>
>>>> <bgambart@hotmail.com> wrote in message
>>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>>> Hi there,
>>>>>
>>>>> I have problems shifting gears. It starts out fine, but after a while
>>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>>> cannot get out of it. If this happens while I am stationary not even
>>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>>> making a little more noise a high speeds as well. Do I need to change
>>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>>
>>>>>
>>>>> Any help with this will be greately appreciated.
>>>>> Thanks
>>>>>
>>> -----------------
>>> TheSnoMan.com
>>
08-07-2007, 11:47 AM
#20
Guest
Posts: n/a
Re: Problems shifting gears in 92 Jeep wrangler
A torque wrench prevents bolts from coming out now?
I always thought it was for tightening bolts to a certain degree. Silly me,
I've been using thread lock all these years with the torque wrench and all I
needed was the wrench.
"RoyJ" <spamless@microsoft.net> wrote in message
news:v80ui.14952$zA4.13530@newsread3.news.pas.eart hlink.net...
> Lets see, there is a tool called a TORQUE WRENCH?
>
> Greg wrote:
>> Another easy thing to check is the bell house to engine bolts, freind
>> has had his come loose twice on his YJ.
>>
>> "SnoMan" <admin@snoman.com> wrote in message
>> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>>> <jeep@_removethisbit_milne.info> wrote:
>>>
>>>> Are you driving it in 4x4 on tarmac ?
>>>>
>>>> Dave
>>> Good point but I think I would also start by changing tranny fluid as
>>> many neglect this.
>>>
>>>> <bgambart@hotmail.com> wrote in message
>>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>>> Hi there,
>>>>>
>>>>> I have problems shifting gears. It starts out fine, but after a while
>>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>>> cannot get out of it. If this happens while I am stationary not even
>>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>>> making a little more noise a high speeds as well. Do I need to change
>>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>>
>>>>>
>>>>> Any help with this will be greately appreciated.
>>>>> Thanks
>>>>>
>>> -----------------
>>> TheSnoMan.com
>>
I always thought it was for tightening bolts to a certain degree. Silly me,
I've been using thread lock all these years with the torque wrench and all I
needed was the wrench.
"RoyJ" <spamless@microsoft.net> wrote in message
news:v80ui.14952$zA4.13530@newsread3.news.pas.eart hlink.net...
> Lets see, there is a tool called a TORQUE WRENCH?
>
> Greg wrote:
>> Another easy thing to check is the bell house to engine bolts, freind
>> has had his come loose twice on his YJ.
>>
>> "SnoMan" <admin@snoman.com> wrote in message
>> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com...
>>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
>>> <jeep@_removethisbit_milne.info> wrote:
>>>
>>>> Are you driving it in 4x4 on tarmac ?
>>>>
>>>> Dave
>>> Good point but I think I would also start by changing tranny fluid as
>>> many neglect this.
>>>
>>>> <bgambart@hotmail.com> wrote in message
>>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com...
>>>>> Hi there,
>>>>>
>>>>> I have problems shifting gears. It starts out fine, but after a while
>>>>> it gets harder to shift gears, eventually I get stuck in one gear and
>>>>> cannot get out of it. If this happens while I am stationary not even
>>>>> the breaks can keep the jeep from moving forward. The drive train is
>>>>> making a little more noise a high speeds as well. Do I need to change
>>>>> the oil in the tranny, or is this something wrong with the clutch????
>>>>>
>>>>>
>>>>> Any help with this will be greately appreciated.
>>>>> Thanks
>>>>>
>>> -----------------
>>> TheSnoMan.com
>>