billy ray wrote:
> REMOVAL
>
> (1) Disconnect and isolate the battery negative
>
> cable.
>
> (2) Remove the trim panel from the inside of the
>
> front door. (Refer to 23 - BODY/DOOR - FRONT/
>
> TRIM PANEL - REMOVAL).
>
> (3) Disconnect the door wire harness connectors
>
> from the door module connector receptacles.
>
> (4) Remove the three screws that secure the door
>
> module to the front door trim panel (Fig. 8).

Thank-you Billy Ray..

It worked great!!

Do I need the whole assembly for the lock-out switch malfunction??

Would a bypass work??

Does anyone know a good deal on a new assembly??

Thank-you again!!

Jim
>
> (5) Remove the door module from the front door
>
> trim panel.
>
> INSTALLATION
>
> (1) Position the door module onto the front door
>
> trim panel.
>
> (2) Install and tighten the three screws that secure
>
> the door module to the front door trim panel. Tighten
>
> the screws to 2.2 N·m (20 in. lbs.).
>
> (3) Reconnect the door wire harness connectors to
>
> the door module connector receptacles.
>
> (4) Reinstall the trim panel onto the front door
>
> inner panel. (Refer to 23 - BODY/DOOR - FRONT/
>
> TRIM PANEL - INSTALLATION).
>
> (5) Reconnect the battery negative cable.
>
> "jim" <piglet80917@netscape.net> wrote in message
> news:1153848980.179220.157110@i3g2000cwc.googlegro ups.com...
> >I need HELP!!
> > My 2000 cherokee limited has a problem in the drivers armrest control
> > assembly.
> > My Haynes manual states that I should "pry out" the assembly and unplug
> > it.
> > I have tried this and cannot seem to get the assembly all the way out.
> > Can you help me on this??
> > Thank-you
> > Jim
> >

 

billy ray wrote:
> REMOVAL
>
> (1) Disconnect and isolate the battery negative
>
> cable.
>
> (2) Remove the trim panel from the inside of the
>
> front door. (Refer to 23 - BODY/DOOR - FRONT/
>
> TRIM PANEL - REMOVAL).
>
> (3) Disconnect the door wire harness connectors
>
> from the door module connector receptacles.
>
> (4) Remove the three screws that secure the door
>
> module to the front door trim panel (Fig. 8).

Thank-you Billy Ray..

It worked great!!

Do I need the whole assembly for the lock-out switch malfunction??

Would a bypass work??

Does anyone know a good deal on a new assembly??

Thank-you again!!

Jim
>
> (5) Remove the door module from the front door
>
> trim panel.
>
> INSTALLATION
>
> (1) Position the door module onto the front door
>
> trim panel.
>
> (2) Install and tighten the three screws that secure
>
> the door module to the front door trim panel. Tighten
>
> the screws to 2.2 N·m (20 in. lbs.).
>
> (3) Reconnect the door wire harness connectors to
>
> the door module connector receptacles.
>
> (4) Reinstall the trim panel onto the front door
>
> inner panel. (Refer to 23 - BODY/DOOR - FRONT/
>
> TRIM PANEL - INSTALLATION).
>
> (5) Reconnect the battery negative cable.
>
> "jim" <piglet80917@netscape.net> wrote in message
> news:1153848980.179220.157110@i3g2000cwc.googlegro ups.com...
> >I need HELP!!
> > My 2000 cherokee limited has a problem in the drivers armrest control
> > assembly.
> > My Haynes manual states that I should "pry out" the assembly and unplug
> > it.
> > I have tried this and cannot seem to get the assembly all the way out.
> > Can you help me on this??
> > Thank-you
> > Jim
> >

 

billy ray wrote:
> REMOVAL
>
> (1) Disconnect and isolate the battery negative
>
> cable.
>
> (2) Remove the trim panel from the inside of the
>
> front door. (Refer to 23 - BODY/DOOR - FRONT/
>
> TRIM PANEL - REMOVAL).
>
> (3) Disconnect the door wire harness connectors
>
> from the door module connector receptacles.
>
> (4) Remove the three screws that secure the door
>
> module to the front door trim panel (Fig. 8).

Thank-you Billy Ray..

It worked great!!

Do I need the whole assembly for the lock-out switch malfunction??

Would a bypass work??

Does anyone know a good deal on a new assembly??

Thank-you again!!

Jim
>
> (5) Remove the door module from the front door
>
> trim panel.
>
> INSTALLATION
>
> (1) Position the door module onto the front door
>
> trim panel.
>
> (2) Install and tighten the three screws that secure
>
> the door module to the front door trim panel. Tighten
>
> the screws to 2.2 N·m (20 in. lbs.).
>
> (3) Reconnect the door wire harness connectors to
>
> the door module connector receptacles.
>
> (4) Reinstall the trim panel onto the front door
>
> inner panel. (Refer to 23 - BODY/DOOR - FRONT/
>
> TRIM PANEL - INSTALLATION).
>
> (5) Reconnect the battery negative cable.
>
> "jim" <piglet80917@netscape.net> wrote in message
> news:1153848980.179220.157110@i3g2000cwc.googlegro ups.com...
> >I need HELP!!
> > My 2000 cherokee limited has a problem in the drivers armrest control
> > assembly.
> > My Haynes manual states that I should "pry out" the assembly and unplug
> > it.
> > I have tried this and cannot seem to get the assembly all the way out.
> > Can you help me on this??
> > Thank-you
> > Jim
> >