Position of window crank when window is up?
08-10-2006, 10:07 PM
#21
Guest
Posts: n/a
Re: Position of window crank when window is up?
Another consideration is the location of the Passenger Door window crank.
Personally, I'd make the tow the same AFTER I accomodated my knee.
"Nick ------" <nixon8890@gmail.com> wrote in message
news:1155256764.042496.141000@75g2000cwc.googlegro ups.com...
> Thanks folks, I'm going with the 11- 12 oclock positions.
>
> Jeff Strickland wrote:
>> Wherever you want ...
>>
>> I'd select a location that did not interfer with where I like my knee to
>> rest.
>>
>>
>>
>>
>> "Nick ------" <nixon8890@gmail.com> wrote in message
>> news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
>> > Folks,
>> >
>> > Does anyone know the position of the window crank (handle) when the
>> > window is fully rolled up? I have a Jeep TJ and disassembled both
>> > inside door panels. I didn't note the crank position on the shaft.
>> >
>> > Any insight appreciated.
>> >
>> > Thanks,
>> > Nick
>> >
>
Personally, I'd make the tow the same AFTER I accomodated my knee.
"Nick ------" <nixon8890@gmail.com> wrote in message
news:1155256764.042496.141000@75g2000cwc.googlegro ups.com...
> Thanks folks, I'm going with the 11- 12 oclock positions.
>
> Jeff Strickland wrote:
>> Wherever you want ...
>>
>> I'd select a location that did not interfer with where I like my knee to
>> rest.
>>
>>
>>
>>
>> "Nick ------" <nixon8890@gmail.com> wrote in message
>> news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
>> > Folks,
>> >
>> > Does anyone know the position of the window crank (handle) when the
>> > window is fully rolled up? I have a Jeep TJ and disassembled both
>> > inside door panels. I didn't note the crank position on the shaft.
>> >
>> > Any insight appreciated.
>> >
>> > Thanks,
>> > Nick
>> >
>
08-11-2006, 09:37 AM
#22
Guest
Posts: n/a
Re: Position of window crank when window is up?
Hey Nick,
JoBo is right.
If you were to use a clock face as a reference it would be between 2:00 and
3:00.
That way it is slightly elevated to that it won't hit your knee while the
window is up, and rests in the down position also out of the way of your
behind.
Kate
2O]]]]]]]O6 Rubicon
"Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
>A generic answer would be out of the way of your leg/knee but I don't know
>how it was originally.
>
> JoBo
>
> "Nick ------" <nixon8890@gmail.com> wrote in message
> news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
>> Folks,
>>
>> Does anyone know the position of the window crank (handle) when the
>> window is fully rolled up? I have a Jeep TJ and disassembled both
>> inside door panels. I didn't note the crank position on the shaft.
>>
>> Any insight appreciated.
>>
>> Thanks,
>> Nick
>>
>
>
JoBo is right.
If you were to use a clock face as a reference it would be between 2:00 and
3:00.
That way it is slightly elevated to that it won't hit your knee while the
window is up, and rests in the down position also out of the way of your
behind.
Kate
2O]]]]]]]O6 Rubicon
"Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
>A generic answer would be out of the way of your leg/knee but I don't know
>how it was originally.
>
> JoBo
>
> "Nick ------" <nixon8890@gmail.com> wrote in message
> news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
>> Folks,
>>
>> Does anyone know the position of the window crank (handle) when the
>> window is fully rolled up? I have a Jeep TJ and disassembled both
>> inside door panels. I didn't note the crank position on the shaft.
>>
>> Any insight appreciated.
>>
>> Thanks,
>> Nick
>>
>
>
08-11-2006, 09:37 AM
#23
Guest
Posts: n/a
Re: Position of window crank when window is up?
Hey Nick,
JoBo is right.
If you were to use a clock face as a reference it would be between 2:00 and
3:00.
That way it is slightly elevated to that it won't hit your knee while the
window is up, and rests in the down position also out of the way of your
behind.
Kate
2O]]]]]]]O6 Rubicon
"Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
>A generic answer would be out of the way of your leg/knee but I don't know
>how it was originally.
>
> JoBo
>
> "Nick ------" <nixon8890@gmail.com> wrote in message
> news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
>> Folks,
>>
>> Does anyone know the position of the window crank (handle) when the
>> window is fully rolled up? I have a Jeep TJ and disassembled both
>> inside door panels. I didn't note the crank position on the shaft.
>>
>> Any insight appreciated.
>>
>> Thanks,
>> Nick
>>
>
>
JoBo is right.
If you were to use a clock face as a reference it would be between 2:00 and
3:00.
That way it is slightly elevated to that it won't hit your knee while the
window is up, and rests in the down position also out of the way of your
behind.
Kate
2O]]]]]]]O6 Rubicon
"Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
>A generic answer would be out of the way of your leg/knee but I don't know
>how it was originally.
>
> JoBo
>
> "Nick ------" <nixon8890@gmail.com> wrote in message
> news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
>> Folks,
>>
>> Does anyone know the position of the window crank (handle) when the
>> window is fully rolled up? I have a Jeep TJ and disassembled both
>> inside door panels. I didn't note the crank position on the shaft.
>>
>> Any insight appreciated.
>>
>> Thanks,
>> Nick
>>
>
>
08-11-2006, 09:37 AM
#24
Guest
Posts: n/a
Re: Position of window crank when window is up?
Hey Nick,
JoBo is right.
If you were to use a clock face as a reference it would be between 2:00 and
3:00.
That way it is slightly elevated to that it won't hit your knee while the
window is up, and rests in the down position also out of the way of your
behind.
Kate
2O]]]]]]]O6 Rubicon
"Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
>A generic answer would be out of the way of your leg/knee but I don't know
>how it was originally.
>
> JoBo
>
> "Nick ------" <nixon8890@gmail.com> wrote in message
> news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
>> Folks,
>>
>> Does anyone know the position of the window crank (handle) when the
>> window is fully rolled up? I have a Jeep TJ and disassembled both
>> inside door panels. I didn't note the crank position on the shaft.
>>
>> Any insight appreciated.
>>
>> Thanks,
>> Nick
>>
>
>
JoBo is right.
If you were to use a clock face as a reference it would be between 2:00 and
3:00.
That way it is slightly elevated to that it won't hit your knee while the
window is up, and rests in the down position also out of the way of your
behind.
Kate
2O]]]]]]]O6 Rubicon
"Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
>A generic answer would be out of the way of your leg/knee but I don't know
>how it was originally.
>
> JoBo
>
> "Nick ------" <nixon8890@gmail.com> wrote in message
> news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
>> Folks,
>>
>> Does anyone know the position of the window crank (handle) when the
>> window is fully rolled up? I have a Jeep TJ and disassembled both
>> inside door panels. I didn't note the crank position on the shaft.
>>
>> Any insight appreciated.
>>
>> Thanks,
>> Nick
>>
>
>
08-11-2006, 09:37 AM
#25
Guest
Posts: n/a
Re: Position of window crank when window is up?
Hey Nick,
JoBo is right.
If you were to use a clock face as a reference it would be between 2:00 and
3:00.
That way it is slightly elevated to that it won't hit your knee while the
window is up, and rests in the down position also out of the way of your
behind.
Kate
2O]]]]]]]O6 Rubicon
"Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
>A generic answer would be out of the way of your leg/knee but I don't know
>how it was originally.
>
> JoBo
>
> "Nick ------" <nixon8890@gmail.com> wrote in message
> news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
>> Folks,
>>
>> Does anyone know the position of the window crank (handle) when the
>> window is fully rolled up? I have a Jeep TJ and disassembled both
>> inside door panels. I didn't note the crank position on the shaft.
>>
>> Any insight appreciated.
>>
>> Thanks,
>> Nick
>>
>
>
JoBo is right.
If you were to use a clock face as a reference it would be between 2:00 and
3:00.
That way it is slightly elevated to that it won't hit your knee while the
window is up, and rests in the down position also out of the way of your
behind.
Kate
2O]]]]]]]O6 Rubicon
"Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
>A generic answer would be out of the way of your leg/knee but I don't know
>how it was originally.
>
> JoBo
>
> "Nick ------" <nixon8890@gmail.com> wrote in message
> news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
>> Folks,
>>
>> Does anyone know the position of the window crank (handle) when the
>> window is fully rolled up? I have a Jeep TJ and disassembled both
>> inside door panels. I didn't note the crank position on the shaft.
>>
>> Any insight appreciated.
>>
>> Thanks,
>> Nick
>>
>
>
08-11-2006, 10:12 AM
#26
Guest
Posts: n/a
Re: Position of window crank when window is up?
If you crank it up in a counter clockwise direction, having the handle
after 12:00 causes it to move down on mine when I hit bumps which
unwinds my window. On the passenger side it happens if I have the
handle before 12:00 because that side winds up clockwise. So I have one
at 11:00 and the other at 1:00.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kate wrote:
>
> Hey Nick,
> JoBo is right.
> If you were to use a clock face as a reference it would be between 2:00 and
> 3:00.
> That way it is slightly elevated to that it won't hit your knee while the
> window is up, and rests in the down position also out of the way of your
> behind.
>
> Kate
> 2O]]]]]]]O6 Rubicon
>
> "Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
> news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
> >A generic answer would be out of the way of your leg/knee but I don't know
> >how it was originally.
> >
> > JoBo
> >
> > "Nick ------" <nixon8890@gmail.com> wrote in message
> > news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> >> Folks,
> >>
> >> Does anyone know the position of the window crank (handle) when the
> >> window is fully rolled up? I have a Jeep TJ and disassembled both
> >> inside door panels. I didn't note the crank position on the shaft.
> >>
> >> Any insight appreciated.
> >>
> >> Thanks,
> >> Nick
> >>
> >
> >
after 12:00 causes it to move down on mine when I hit bumps which
unwinds my window. On the passenger side it happens if I have the
handle before 12:00 because that side winds up clockwise. So I have one
at 11:00 and the other at 1:00.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kate wrote:
>
> Hey Nick,
> JoBo is right.
> If you were to use a clock face as a reference it would be between 2:00 and
> 3:00.
> That way it is slightly elevated to that it won't hit your knee while the
> window is up, and rests in the down position also out of the way of your
> behind.
>
> Kate
> 2O]]]]]]]O6 Rubicon
>
> "Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
> news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
> >A generic answer would be out of the way of your leg/knee but I don't know
> >how it was originally.
> >
> > JoBo
> >
> > "Nick ------" <nixon8890@gmail.com> wrote in message
> > news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> >> Folks,
> >>
> >> Does anyone know the position of the window crank (handle) when the
> >> window is fully rolled up? I have a Jeep TJ and disassembled both
> >> inside door panels. I didn't note the crank position on the shaft.
> >>
> >> Any insight appreciated.
> >>
> >> Thanks,
> >> Nick
> >>
> >
> >
08-11-2006, 10:12 AM
#27
Guest
Posts: n/a
Re: Position of window crank when window is up?
If you crank it up in a counter clockwise direction, having the handle
after 12:00 causes it to move down on mine when I hit bumps which
unwinds my window. On the passenger side it happens if I have the
handle before 12:00 because that side winds up clockwise. So I have one
at 11:00 and the other at 1:00.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kate wrote:
>
> Hey Nick,
> JoBo is right.
> If you were to use a clock face as a reference it would be between 2:00 and
> 3:00.
> That way it is slightly elevated to that it won't hit your knee while the
> window is up, and rests in the down position also out of the way of your
> behind.
>
> Kate
> 2O]]]]]]]O6 Rubicon
>
> "Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
> news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
> >A generic answer would be out of the way of your leg/knee but I don't know
> >how it was originally.
> >
> > JoBo
> >
> > "Nick ------" <nixon8890@gmail.com> wrote in message
> > news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> >> Folks,
> >>
> >> Does anyone know the position of the window crank (handle) when the
> >> window is fully rolled up? I have a Jeep TJ and disassembled both
> >> inside door panels. I didn't note the crank position on the shaft.
> >>
> >> Any insight appreciated.
> >>
> >> Thanks,
> >> Nick
> >>
> >
> >
after 12:00 causes it to move down on mine when I hit bumps which
unwinds my window. On the passenger side it happens if I have the
handle before 12:00 because that side winds up clockwise. So I have one
at 11:00 and the other at 1:00.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kate wrote:
>
> Hey Nick,
> JoBo is right.
> If you were to use a clock face as a reference it would be between 2:00 and
> 3:00.
> That way it is slightly elevated to that it won't hit your knee while the
> window is up, and rests in the down position also out of the way of your
> behind.
>
> Kate
> 2O]]]]]]]O6 Rubicon
>
> "Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
> news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
> >A generic answer would be out of the way of your leg/knee but I don't know
> >how it was originally.
> >
> > JoBo
> >
> > "Nick ------" <nixon8890@gmail.com> wrote in message
> > news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> >> Folks,
> >>
> >> Does anyone know the position of the window crank (handle) when the
> >> window is fully rolled up? I have a Jeep TJ and disassembled both
> >> inside door panels. I didn't note the crank position on the shaft.
> >>
> >> Any insight appreciated.
> >>
> >> Thanks,
> >> Nick
> >>
> >
> >
08-11-2006, 10:12 AM
#28
Guest
Posts: n/a
Re: Position of window crank when window is up?
If you crank it up in a counter clockwise direction, having the handle
after 12:00 causes it to move down on mine when I hit bumps which
unwinds my window. On the passenger side it happens if I have the
handle before 12:00 because that side winds up clockwise. So I have one
at 11:00 and the other at 1:00.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kate wrote:
>
> Hey Nick,
> JoBo is right.
> If you were to use a clock face as a reference it would be between 2:00 and
> 3:00.
> That way it is slightly elevated to that it won't hit your knee while the
> window is up, and rests in the down position also out of the way of your
> behind.
>
> Kate
> 2O]]]]]]]O6 Rubicon
>
> "Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
> news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
> >A generic answer would be out of the way of your leg/knee but I don't know
> >how it was originally.
> >
> > JoBo
> >
> > "Nick ------" <nixon8890@gmail.com> wrote in message
> > news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> >> Folks,
> >>
> >> Does anyone know the position of the window crank (handle) when the
> >> window is fully rolled up? I have a Jeep TJ and disassembled both
> >> inside door panels. I didn't note the crank position on the shaft.
> >>
> >> Any insight appreciated.
> >>
> >> Thanks,
> >> Nick
> >>
> >
> >
after 12:00 causes it to move down on mine when I hit bumps which
unwinds my window. On the passenger side it happens if I have the
handle before 12:00 because that side winds up clockwise. So I have one
at 11:00 and the other at 1:00.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kate wrote:
>
> Hey Nick,
> JoBo is right.
> If you were to use a clock face as a reference it would be between 2:00 and
> 3:00.
> That way it is slightly elevated to that it won't hit your knee while the
> window is up, and rests in the down position also out of the way of your
> behind.
>
> Kate
> 2O]]]]]]]O6 Rubicon
>
> "Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
> news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
> >A generic answer would be out of the way of your leg/knee but I don't know
> >how it was originally.
> >
> > JoBo
> >
> > "Nick ------" <nixon8890@gmail.com> wrote in message
> > news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> >> Folks,
> >>
> >> Does anyone know the position of the window crank (handle) when the
> >> window is fully rolled up? I have a Jeep TJ and disassembled both
> >> inside door panels. I didn't note the crank position on the shaft.
> >>
> >> Any insight appreciated.
> >>
> >> Thanks,
> >> Nick
> >>
> >
> >
08-11-2006, 10:12 AM
#29
Guest
Posts: n/a
Re: Position of window crank when window is up?
If you crank it up in a counter clockwise direction, having the handle
after 12:00 causes it to move down on mine when I hit bumps which
unwinds my window. On the passenger side it happens if I have the
handle before 12:00 because that side winds up clockwise. So I have one
at 11:00 and the other at 1:00.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kate wrote:
>
> Hey Nick,
> JoBo is right.
> If you were to use a clock face as a reference it would be between 2:00 and
> 3:00.
> That way it is slightly elevated to that it won't hit your knee while the
> window is up, and rests in the down position also out of the way of your
> behind.
>
> Kate
> 2O]]]]]]]O6 Rubicon
>
> "Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
> news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
> >A generic answer would be out of the way of your leg/knee but I don't know
> >how it was originally.
> >
> > JoBo
> >
> > "Nick ------" <nixon8890@gmail.com> wrote in message
> > news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> >> Folks,
> >>
> >> Does anyone know the position of the window crank (handle) when the
> >> window is fully rolled up? I have a Jeep TJ and disassembled both
> >> inside door panels. I didn't note the crank position on the shaft.
> >>
> >> Any insight appreciated.
> >>
> >> Thanks,
> >> Nick
> >>
> >
> >
after 12:00 causes it to move down on mine when I hit bumps which
unwinds my window. On the passenger side it happens if I have the
handle before 12:00 because that side winds up clockwise. So I have one
at 11:00 and the other at 1:00.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kate wrote:
>
> Hey Nick,
> JoBo is right.
> If you were to use a clock face as a reference it would be between 2:00 and
> 3:00.
> That way it is slightly elevated to that it won't hit your knee while the
> window is up, and rests in the down position also out of the way of your
> behind.
>
> Kate
> 2O]]]]]]]O6 Rubicon
>
> "Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
> news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
> >A generic answer would be out of the way of your leg/knee but I don't know
> >how it was originally.
> >
> > JoBo
> >
> > "Nick ------" <nixon8890@gmail.com> wrote in message
> > news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
> >> Folks,
> >>
> >> Does anyone know the position of the window crank (handle) when the
> >> window is fully rolled up? I have a Jeep TJ and disassembled both
> >> inside door panels. I didn't note the crank position on the shaft.
> >>
> >> Any insight appreciated.
> >>
> >> Thanks,
> >> Nick
> >>
> >
> >
08-11-2006, 02:31 PM
#30
Guest
Posts: n/a
Re: Position of window crank when window is up?
Mine are both at about 2:15, they work just fine there for us.
When we had some minor paint work done on both doors the tech put the cranks
back on in the wrong spot (meaning not where they were from the factory) and
we bumped into them for a couple of days efore running in and having him
move them.
Mike proves here that not all settings will work for all people.
His *** is prolly a lot smaller than mine too, so I'll keep mine right where
it's at.
;ŹD
Kate
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:44DC9045.A458F9DF@sympatico.ca...
> If you crank it up in a counter clockwise direction, having the handle
> after 12:00 causes it to move down on mine when I hit bumps which
> unwinds my window. On the passenger side it happens if I have the
> handle before 12:00 because that side winds up clockwise. So I have one
> at 11:00 and the other at 1:00.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Kate wrote:
>>
>> Hey Nick,
>> JoBo is right.
>> If you were to use a clock face as a reference it would be between 2:00
>> and
>> 3:00.
>> That way it is slightly elevated to that it won't hit your knee while the
>> window is up, and rests in the down position also out of the way of your
>> behind.
>>
>> Kate
>> 2O]]]]]]]O6 Rubicon
>>
>> "Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
>> news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
>> >A generic answer would be out of the way of your leg/knee but I don't
>> >know
>> >how it was originally.
>> >
>> > JoBo
>> >
>> > "Nick ------" <nixon8890@gmail.com> wrote in message
>> > news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
>> >> Folks,
>> >>
>> >> Does anyone know the position of the window crank (handle) when the
>> >> window is fully rolled up? I have a Jeep TJ and disassembled both
>> >> inside door panels. I didn't note the crank position on the shaft.
>> >>
>> >> Any insight appreciated.
>> >>
>> >> Thanks,
>> >> Nick
>> >>
>> >
>> >
When we had some minor paint work done on both doors the tech put the cranks
back on in the wrong spot (meaning not where they were from the factory) and
we bumped into them for a couple of days efore running in and having him
move them.
Mike proves here that not all settings will work for all people.
His *** is prolly a lot smaller than mine too, so I'll keep mine right where
it's at.
;ŹD
Kate
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:44DC9045.A458F9DF@sympatico.ca...
> If you crank it up in a counter clockwise direction, having the handle
> after 12:00 causes it to move down on mine when I hit bumps which
> unwinds my window. On the passenger side it happens if I have the
> handle before 12:00 because that side winds up clockwise. So I have one
> at 11:00 and the other at 1:00.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> Kate wrote:
>>
>> Hey Nick,
>> JoBo is right.
>> If you were to use a clock face as a reference it would be between 2:00
>> and
>> 3:00.
>> That way it is slightly elevated to that it won't hit your knee while the
>> window is up, and rests in the down position also out of the way of your
>> behind.
>>
>> Kate
>> 2O]]]]]]]O6 Rubicon
>>
>> "Jo Bo" <jromas SPAM@columbus.rr.com> wrote in message
>> news:47NCg.64677$Eh1.20143@tornado.ohiordc.rr.com. ..
>> >A generic answer would be out of the way of your leg/knee but I don't
>> >know
>> >how it was originally.
>> >
>> > JoBo
>> >
>> > "Nick ------" <nixon8890@gmail.com> wrote in message
>> > news:1155243400.632599.281100@m79g2000cwm.googlegr oups.com...
>> >> Folks,
>> >>
>> >> Does anyone know the position of the window crank (handle) when the
>> >> window is fully rolled up? I have a Jeep TJ and disassembled both
>> >> inside door panels. I didn't note the crank position on the shaft.
>> >>
>> >> Any insight appreciated.
>> >>
>> >> Thanks,
>> >> Nick
>> >>
>> >
>> >