POR 15 suggestion
10-28-2004, 01:41 PM
#2
Guest
Posts: n/a
Re: POR 15 suggestion
keep the brush away from the holes :-)
sorry, couldn't resist.
I used normal masking tape, and folded over a lip on each end so I could
remove it easily.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:r%9gd.233$o4.32736@news.uswest.net...
> Easy ways to keep POR 15 out of bolt holes on frame? It has been
suggested
> to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
> Any other tricks?
sorry, couldn't resist.
I used normal masking tape, and folded over a lip on each end so I could
remove it easily.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:r%9gd.233$o4.32736@news.uswest.net...
> Easy ways to keep POR 15 out of bolt holes on frame? It has been
suggested
> to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
> Any other tricks?
10-28-2004, 01:41 PM
#3
Guest
Posts: n/a
Re: POR 15 suggestion
keep the brush away from the holes :-)
sorry, couldn't resist.
I used normal masking tape, and folded over a lip on each end so I could
remove it easily.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:r%9gd.233$o4.32736@news.uswest.net...
> Easy ways to keep POR 15 out of bolt holes on frame? It has been
suggested
> to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
> Any other tricks?
sorry, couldn't resist.
I used normal masking tape, and folded over a lip on each end so I could
remove it easily.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:r%9gd.233$o4.32736@news.uswest.net...
> Easy ways to keep POR 15 out of bolt holes on frame? It has been
suggested
> to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
> Any other tricks?
10-28-2004, 01:41 PM
#4
Guest
Posts: n/a
Re: POR 15 suggestion
keep the brush away from the holes :-)
sorry, couldn't resist.
I used normal masking tape, and folded over a lip on each end so I could
remove it easily.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:r%9gd.233$o4.32736@news.uswest.net...
> Easy ways to keep POR 15 out of bolt holes on frame? It has been
suggested
> to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
> Any other tricks?
sorry, couldn't resist.
I used normal masking tape, and folded over a lip on each end so I could
remove it easily.
Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:r%9gd.233$o4.32736@news.uswest.net...
> Easy ways to keep POR 15 out of bolt holes on frame? It has been
suggested
> to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
> Any other tricks?
10-28-2004, 03:34 PM
#5
Guest
Posts: n/a
Re: POR 15 suggestion
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:r%9gd.233$o4.32736@news.uswest.net...
: Easy ways to keep POR 15 out of bolt holes on frame? It has been
suggested
: to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
: Any other tricks?
:
:
Those squishy foam ear plugs.
http://tinyurl.com/56poe
-Brian
news:r%9gd.233$o4.32736@news.uswest.net...
: Easy ways to keep POR 15 out of bolt holes on frame? It has been
suggested
: to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
: Any other tricks?
:
:
Those squishy foam ear plugs.
http://tinyurl.com/56poe
-Brian
10-28-2004, 03:34 PM
#6
Guest
Posts: n/a
Re: POR 15 suggestion
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:r%9gd.233$o4.32736@news.uswest.net...
: Easy ways to keep POR 15 out of bolt holes on frame? It has been
suggested
: to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
: Any other tricks?
:
:
Those squishy foam ear plugs.
http://tinyurl.com/56poe
-Brian
news:r%9gd.233$o4.32736@news.uswest.net...
: Easy ways to keep POR 15 out of bolt holes on frame? It has been
suggested
: to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
: Any other tricks?
:
:
Those squishy foam ear plugs.
http://tinyurl.com/56poe
-Brian
10-28-2004, 03:34 PM
#7
Guest
Posts: n/a
Re: POR 15 suggestion
"Kevin S" <ksperle@nospam.hotmail.com> wrote in message
news:r%9gd.233$o4.32736@news.uswest.net...
: Easy ways to keep POR 15 out of bolt holes on frame? It has been
suggested
: to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
: Any other tricks?
:
:
Those squishy foam ear plugs.
http://tinyurl.com/56poe
-Brian
news:r%9gd.233$o4.32736@news.uswest.net...
: Easy ways to keep POR 15 out of bolt holes on frame? It has been
suggested
: to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
: Any other tricks?
:
:
Those squishy foam ear plugs.
http://tinyurl.com/56poe
-Brian
10-28-2004, 03:35 PM
#8
Guest
Posts: n/a
Re: POR 15 suggestion
What about stuffing a snug fitting dowel or something like that into
the hole, that way you can go right to the edge of the hole.
I'd paint the stuff on, then before it dried, would remove the dowels
before the POR15 setup (as long as the stuff didn't oooze into the
hole, I don't know how much the stuff moves around as it dries).
On Thu, 28 Oct 2004 11:30:41 -0600, "Kevin S"
<ksperle@nospam.hotmail.com> wrote:
>Easy ways to keep POR 15 out of bolt holes on frame? It has been suggested
>to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
>Any other tricks?
>
the hole, that way you can go right to the edge of the hole.
I'd paint the stuff on, then before it dried, would remove the dowels
before the POR15 setup (as long as the stuff didn't oooze into the
hole, I don't know how much the stuff moves around as it dries).
On Thu, 28 Oct 2004 11:30:41 -0600, "Kevin S"
<ksperle@nospam.hotmail.com> wrote:
>Easy ways to keep POR 15 out of bolt holes on frame? It has been suggested
>to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
>Any other tricks?
>
10-28-2004, 03:35 PM
#9
Guest
Posts: n/a
Re: POR 15 suggestion
What about stuffing a snug fitting dowel or something like that into
the hole, that way you can go right to the edge of the hole.
I'd paint the stuff on, then before it dried, would remove the dowels
before the POR15 setup (as long as the stuff didn't oooze into the
hole, I don't know how much the stuff moves around as it dries).
On Thu, 28 Oct 2004 11:30:41 -0600, "Kevin S"
<ksperle@nospam.hotmail.com> wrote:
>Easy ways to keep POR 15 out of bolt holes on frame? It has been suggested
>to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
>Any other tricks?
>
the hole, that way you can go right to the edge of the hole.
I'd paint the stuff on, then before it dried, would remove the dowels
before the POR15 setup (as long as the stuff didn't oooze into the
hole, I don't know how much the stuff moves around as it dries).
On Thu, 28 Oct 2004 11:30:41 -0600, "Kevin S"
<ksperle@nospam.hotmail.com> wrote:
>Easy ways to keep POR 15 out of bolt holes on frame? It has been suggested
>to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
>Any other tricks?
>
10-28-2004, 03:35 PM
#10
Guest
Posts: n/a
Re: POR 15 suggestion
What about stuffing a snug fitting dowel or something like that into
the hole, that way you can go right to the edge of the hole.
I'd paint the stuff on, then before it dried, would remove the dowels
before the POR15 setup (as long as the stuff didn't oooze into the
hole, I don't know how much the stuff moves around as it dries).
On Thu, 28 Oct 2004 11:30:41 -0600, "Kevin S"
<ksperle@nospam.hotmail.com> wrote:
>Easy ways to keep POR 15 out of bolt holes on frame? It has been suggested
>to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
>Any other tricks?
>
the hole, that way you can go right to the edge of the hole.
I'd paint the stuff on, then before it dried, would remove the dowels
before the POR15 setup (as long as the stuff didn't oooze into the
hole, I don't know how much the stuff moves around as it dries).
On Thu, 28 Oct 2004 11:30:41 -0600, "Kevin S"
<ksperle@nospam.hotmail.com> wrote:
>Easy ways to keep POR 15 out of bolt holes on frame? It has been suggested
>to put bolts in the holes, vaseline, or just re-tap the holes afterwords.
>Any other tricks?
>
