|
Re: poor shifting
On Fri, 13 May 2005 14:14:30 GMT, Greg wrote:
> As I still haven't done mine, but will, what is the cane loop/air lock > for? You can demonstrate this in the house: Fill the sink with water Hold a cup with the opening facing down Push the cup into the sink Now, how much water is in the cup? If you simply point the hose up, you have merely increased the necessary water level before you end up in the exact same situation. However, by pointing the opening down you create a situation where the air in the hose will prevent water from entering even if the water is well over the top of the hose. -D > "Mike Romain" <romainm@sympatico.ca> wrote in message > news:4284AD87.8A720D4C@sympatico.ca... >> There is the trouble, you don't 'have' a vent line. Jeep decided to >> protect every other part of the vehicle except the transmission. >> >> I pulled the stooopid button vent out of mine and tapped in a piece of >> steel gas line to make a nipple for the vent line. I used transmission >> hose and ran it up by the battery then inverted the top in a cane handle >> loop. to make an air lock. Pointed the end down. >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's >> >> Jeep wrote: >>> >>> well it seems that water was the main cause of mine going bad...now >>> looking >>> for the best ideas on relocating the vent lines?/ Bill ya got a link for >>> that?? >>> Jeff >>> -- Q: What is the difference between open-source and commercial software? A: If you have a problem with commercial software you can call a phone number and they will tell you it might be solved in a future version. For open-source sofware there isn't a phone number to call, but you get the solution within a day. www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org |
Re: poor shifting
Yup, just what he said. The stock ones come with a fitting that has a
nipple end up with a cap over it. The cap acts just like the below mentioned cup. Mike Derrick Hudson wrote: > > On Fri, 13 May 2005 14:14:30 GMT, Greg wrote: > > As I still haven't done mine, but will, what is the cane loop/air lock > > for? > > You can demonstrate this in the house: > Fill the sink with water > Hold a cup with the opening facing down > Push the cup into the sink > Now, how much water is in the cup? > > If you simply point the hose up, you have merely increased the > necessary water level before you end up in the exact same situation. > However, by pointing the opening down you create a situation where the > air in the hose will prevent water from entering even if the water is > well over the top of the hose. > > -D > > > > "Mike Romain" <romainm@sympatico.ca> wrote in message > > news:4284AD87.8A720D4C@sympatico.ca... > >> There is the trouble, you don't 'have' a vent line. Jeep decided to > >> protect every other part of the vehicle except the transmission. > >> > >> I pulled the stooopid button vent out of mine and tapped in a piece of > >> steel gas line to make a nipple for the vent line. I used transmission > >> hose and ran it up by the battery then inverted the top in a cane handle > >> loop. to make an air lock. Pointed the end down. > >> > >> Mike > >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > >> 88 Cherokee 235 BFG AT's > >> > >> Jeep wrote: > >>> > >>> well it seems that water was the main cause of mine going bad...now > >>> looking > >>> for the best ideas on relocating the vent lines?/ Bill ya got a link for > >>> that?? > >>> Jeff > >>> > > -- > Q: What is the difference between open-source and commercial software? > A: If you have a problem with commercial software you can call a phone > number and they will tell you it might be solved in a future version. > For open-source sofware there isn't a phone number to call, but you > get the solution within a day. > > www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org |
Re: poor shifting
Yup, just what he said. The stock ones come with a fitting that has a
nipple end up with a cap over it. The cap acts just like the below mentioned cup. Mike Derrick Hudson wrote: > > On Fri, 13 May 2005 14:14:30 GMT, Greg wrote: > > As I still haven't done mine, but will, what is the cane loop/air lock > > for? > > You can demonstrate this in the house: > Fill the sink with water > Hold a cup with the opening facing down > Push the cup into the sink > Now, how much water is in the cup? > > If you simply point the hose up, you have merely increased the > necessary water level before you end up in the exact same situation. > However, by pointing the opening down you create a situation where the > air in the hose will prevent water from entering even if the water is > well over the top of the hose. > > -D > > > > "Mike Romain" <romainm@sympatico.ca> wrote in message > > news:4284AD87.8A720D4C@sympatico.ca... > >> There is the trouble, you don't 'have' a vent line. Jeep decided to > >> protect every other part of the vehicle except the transmission. > >> > >> I pulled the stooopid button vent out of mine and tapped in a piece of > >> steel gas line to make a nipple for the vent line. I used transmission > >> hose and ran it up by the battery then inverted the top in a cane handle > >> loop. to make an air lock. Pointed the end down. > >> > >> Mike > >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > >> 88 Cherokee 235 BFG AT's > >> > >> Jeep wrote: > >>> > >>> well it seems that water was the main cause of mine going bad...now > >>> looking > >>> for the best ideas on relocating the vent lines?/ Bill ya got a link for > >>> that?? > >>> Jeff > >>> > > -- > Q: What is the difference between open-source and commercial software? > A: If you have a problem with commercial software you can call a phone > number and they will tell you it might be solved in a future version. > For open-source sofware there isn't a phone number to call, but you > get the solution within a day. > > www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org |
Re: poor shifting
Yup, just what he said. The stock ones come with a fitting that has a
nipple end up with a cap over it. The cap acts just like the below mentioned cup. Mike Derrick Hudson wrote: > > On Fri, 13 May 2005 14:14:30 GMT, Greg wrote: > > As I still haven't done mine, but will, what is the cane loop/air lock > > for? > > You can demonstrate this in the house: > Fill the sink with water > Hold a cup with the opening facing down > Push the cup into the sink > Now, how much water is in the cup? > > If you simply point the hose up, you have merely increased the > necessary water level before you end up in the exact same situation. > However, by pointing the opening down you create a situation where the > air in the hose will prevent water from entering even if the water is > well over the top of the hose. > > -D > > > > "Mike Romain" <romainm@sympatico.ca> wrote in message > > news:4284AD87.8A720D4C@sympatico.ca... > >> There is the trouble, you don't 'have' a vent line. Jeep decided to > >> protect every other part of the vehicle except the transmission. > >> > >> I pulled the stooopid button vent out of mine and tapped in a piece of > >> steel gas line to make a nipple for the vent line. I used transmission > >> hose and ran it up by the battery then inverted the top in a cane handle > >> loop. to make an air lock. Pointed the end down. > >> > >> Mike > >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > >> 88 Cherokee 235 BFG AT's > >> > >> Jeep wrote: > >>> > >>> well it seems that water was the main cause of mine going bad...now > >>> looking > >>> for the best ideas on relocating the vent lines?/ Bill ya got a link for > >>> that?? > >>> Jeff > >>> > > -- > Q: What is the difference between open-source and commercial software? > A: If you have a problem with commercial software you can call a phone > number and they will tell you it might be solved in a future version. > For open-source sofware there isn't a phone number to call, but you > get the solution within a day. > > www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org |
Re: poor shifting
Yup, just what he said. The stock ones come with a fitting that has a
nipple end up with a cap over it. The cap acts just like the below mentioned cup. Mike Derrick Hudson wrote: > > On Fri, 13 May 2005 14:14:30 GMT, Greg wrote: > > As I still haven't done mine, but will, what is the cane loop/air lock > > for? > > You can demonstrate this in the house: > Fill the sink with water > Hold a cup with the opening facing down > Push the cup into the sink > Now, how much water is in the cup? > > If you simply point the hose up, you have merely increased the > necessary water level before you end up in the exact same situation. > However, by pointing the opening down you create a situation where the > air in the hose will prevent water from entering even if the water is > well over the top of the hose. > > -D > > > > "Mike Romain" <romainm@sympatico.ca> wrote in message > > news:4284AD87.8A720D4C@sympatico.ca... > >> There is the trouble, you don't 'have' a vent line. Jeep decided to > >> protect every other part of the vehicle except the transmission. > >> > >> I pulled the stooopid button vent out of mine and tapped in a piece of > >> steel gas line to make a nipple for the vent line. I used transmission > >> hose and ran it up by the battery then inverted the top in a cane handle > >> loop. to make an air lock. Pointed the end down. > >> > >> Mike > >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > >> 88 Cherokee 235 BFG AT's > >> > >> Jeep wrote: > >>> > >>> well it seems that water was the main cause of mine going bad...now > >>> looking > >>> for the best ideas on relocating the vent lines?/ Bill ya got a link for > >>> that?? > >>> Jeff > >>> > > -- > Q: What is the difference between open-source and commercial software? > A: If you have a problem with commercial software you can call a phone > number and they will tell you it might be solved in a future version. > For open-source sofware there isn't a phone number to call, but you > get the solution within a day. > > www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org |
| All times are GMT -4. The time now is 03:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands