poor shifting
05-12-2005, 03:29 AM
#2
Guest
Posts: n/a
Re: poor shifting
I had rough shifting on my AX-15 trans. Switched from API GL-5 oil to
GM Synchromesh. Significant improvement, especially when cold. Also
available as Pennzoil Synchromesh: same as the GM stuff but cheaper:
http://www.pennzoil.com/products/gea...cro_fluid.html
The AX-15 has sintered brass synchros that don't tolerate sulfur in
regular GL-5 90 weight oil. Better to use API GL-3 rated lubes like
Synchromesh or Red Line MTL.
Steve
http://xjeep.dyndns.org
Mythic wrote:
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
> Thanks!
GM Synchromesh. Significant improvement, especially when cold. Also
available as Pennzoil Synchromesh: same as the GM stuff but cheaper:
http://www.pennzoil.com/products/gea...cro_fluid.html
The AX-15 has sintered brass synchros that don't tolerate sulfur in
regular GL-5 90 weight oil. Better to use API GL-3 rated lubes like
Synchromesh or Red Line MTL.
Steve
http://xjeep.dyndns.org
Mythic wrote:
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
> Thanks!
05-12-2005, 03:29 AM
#3
Guest
Posts: n/a
Re: poor shifting
I had rough shifting on my AX-15 trans. Switched from API GL-5 oil to
GM Synchromesh. Significant improvement, especially when cold. Also
available as Pennzoil Synchromesh: same as the GM stuff but cheaper:
http://www.pennzoil.com/products/gea...cro_fluid.html
The AX-15 has sintered brass synchros that don't tolerate sulfur in
regular GL-5 90 weight oil. Better to use API GL-3 rated lubes like
Synchromesh or Red Line MTL.
Steve
http://xjeep.dyndns.org
Mythic wrote:
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
> Thanks!
GM Synchromesh. Significant improvement, especially when cold. Also
available as Pennzoil Synchromesh: same as the GM stuff but cheaper:
http://www.pennzoil.com/products/gea...cro_fluid.html
The AX-15 has sintered brass synchros that don't tolerate sulfur in
regular GL-5 90 weight oil. Better to use API GL-3 rated lubes like
Synchromesh or Red Line MTL.
Steve
http://xjeep.dyndns.org
Mythic wrote:
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
> Thanks!
05-12-2005, 03:29 AM
#4
Guest
Posts: n/a
Re: poor shifting
I had rough shifting on my AX-15 trans. Switched from API GL-5 oil to
GM Synchromesh. Significant improvement, especially when cold. Also
available as Pennzoil Synchromesh: same as the GM stuff but cheaper:
http://www.pennzoil.com/products/gea...cro_fluid.html
The AX-15 has sintered brass synchros that don't tolerate sulfur in
regular GL-5 90 weight oil. Better to use API GL-3 rated lubes like
Synchromesh or Red Line MTL.
Steve
http://xjeep.dyndns.org
Mythic wrote:
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
> Thanks!
GM Synchromesh. Significant improvement, especially when cold. Also
available as Pennzoil Synchromesh: same as the GM stuff but cheaper:
http://www.pennzoil.com/products/gea...cro_fluid.html
The AX-15 has sintered brass synchros that don't tolerate sulfur in
regular GL-5 90 weight oil. Better to use API GL-3 rated lubes like
Synchromesh or Red Line MTL.
Steve
http://xjeep.dyndns.org
Mythic wrote:
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
> Thanks!
05-12-2005, 03:29 AM
#5
Guest
Posts: n/a
Re: poor shifting
I had rough shifting on my AX-15 trans. Switched from API GL-5 oil to
GM Synchromesh. Significant improvement, especially when cold. Also
available as Pennzoil Synchromesh: same as the GM stuff but cheaper:
http://www.pennzoil.com/products/gea...cro_fluid.html
The AX-15 has sintered brass synchros that don't tolerate sulfur in
regular GL-5 90 weight oil. Better to use API GL-3 rated lubes like
Synchromesh or Red Line MTL.
Steve
http://xjeep.dyndns.org
Mythic wrote:
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
> Thanks!
GM Synchromesh. Significant improvement, especially when cold. Also
available as Pennzoil Synchromesh: same as the GM stuff but cheaper:
http://www.pennzoil.com/products/gea...cro_fluid.html
The AX-15 has sintered brass synchros that don't tolerate sulfur in
regular GL-5 90 weight oil. Better to use API GL-3 rated lubes like
Synchromesh or Red Line MTL.
Steve
http://xjeep.dyndns.org
Mythic wrote:
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
> Thanks!
05-12-2005, 07:33 AM
#6
Guest
Posts: n/a
Re: poor shifting
Mythic did pass the time by typing:
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
Yep, let it warm up. :)
....
couldn't resist.
--
DougW
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
Yep, let it warm up. :)
....
couldn't resist.
--
DougW
05-12-2005, 07:33 AM
#7
Guest
Posts: n/a
Re: poor shifting
Mythic did pass the time by typing:
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
Yep, let it warm up. :)
....
couldn't resist.
--
DougW
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
Yep, let it warm up. :)
....
couldn't resist.
--
DougW
05-12-2005, 07:33 AM
#8
Guest
Posts: n/a
Re: poor shifting
Mythic did pass the time by typing:
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
Yep, let it warm up. :)
....
couldn't resist.
--
DougW
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
Yep, let it warm up. :)
....
couldn't resist.
--
DougW
05-12-2005, 07:33 AM
#9
Guest
Posts: n/a
Re: poor shifting
Mythic did pass the time by typing:
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
Yep, let it warm up. :)
....
couldn't resist.
--
DougW
> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts
> alot easier.
>
> Any ideas?
Yep, let it warm up. :)
....
couldn't resist.
--
DougW
05-12-2005, 07:33 AM
#10
Guest
Posts: n/a
Re: poor shifting
Mine was doing that and is now at the Tranny shop getting new
syncronizers...warranty can be a wonderful thing...
Jeff
"Steve" <xjlifter@bogus.com> wrote in message
news:vBDge.106096$3V3.102035@edtnps89...
>I had rough shifting on my AX-15 trans. Switched from API GL-5 oil to
> GM Synchromesh. Significant improvement, especially when cold. Also
> available as Pennzoil Synchromesh: same as the GM stuff but cheaper:
>
> http://www.pennzoil.com/products/gea...cro_fluid.html
>
> The AX-15 has sintered brass synchros that don't tolerate sulfur in
> regular GL-5 90 weight oil. Better to use API GL-3 rated lubes like
> Synchromesh or Red Line MTL.
>
> Steve
> http://xjeep.dyndns.org
>
> Mythic wrote:
>> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
>> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts alot
>> easier.
>>
>> Any ideas?
>> Thanks!
syncronizers...warranty can be a wonderful thing...
Jeff
"Steve" <xjlifter@bogus.com> wrote in message
news:vBDge.106096$3V3.102035@edtnps89...
>I had rough shifting on my AX-15 trans. Switched from API GL-5 oil to
> GM Synchromesh. Significant improvement, especially when cold. Also
> available as Pennzoil Synchromesh: same as the GM stuff but cheaper:
>
> http://www.pennzoil.com/products/gea...cro_fluid.html
>
> The AX-15 has sintered brass synchros that don't tolerate sulfur in
> regular GL-5 90 weight oil. Better to use API GL-3 rated lubes like
> Synchromesh or Red Line MTL.
>
> Steve
> http://xjeep.dyndns.org
>
> Mythic wrote:
>> Hey all, when my 97 jeep tj (5spd manual) is cold, it's hard to shift
>> from 1st to 2nd and vice versa. Once it's warmed up a bit, it shifts alot
>> easier.
>>
>> Any ideas?
>> Thanks!
