Poly Bushings for 2000 XJ
#11
Guest
Posts: n/a
Re: Poly Bushings for 2000 XJ
According to the Quad website, factory is 1 1/2, but in the
discription of it, all of them show 3" offset, there is a link
for live help on the site, may try that. The trans mount
should be available locally at a parts store, eg: Autozone or
Napa
Kevin in Iowa
99XJ
http://7slotgrille.com/jeepers/lwb/kevinxj/index.html
discription of it, all of them show 3" offset, there is a link
for live help on the site, may try that. The trans mount
should be available locally at a parts store, eg: Autozone or
Napa
Kevin in Iowa
99XJ
http://7slotgrille.com/jeepers/lwb/kevinxj/index.html
#12
Guest
Posts: n/a
Re: Poly Bushings for 2000 XJ
According to the Quad website, factory is 1 1/2, but in the
discription of it, all of them show 3" offset, there is a link
for live help on the site, may try that. The trans mount
should be available locally at a parts store, eg: Autozone or
Napa
Kevin in Iowa
99XJ
http://7slotgrille.com/jeepers/lwb/kevinxj/index.html
discription of it, all of them show 3" offset, there is a link
for live help on the site, may try that. The trans mount
should be available locally at a parts store, eg: Autozone or
Napa
Kevin in Iowa
99XJ
http://7slotgrille.com/jeepers/lwb/kevinxj/index.html
#13
Guest
Posts: n/a
Re: Poly Bushings for 2000 XJ
According to the Quad website, factory is 1 1/2, but in the
discription of it, all of them show 3" offset, there is a link
for live help on the site, may try that. The trans mount
should be available locally at a parts store, eg: Autozone or
Napa
Kevin in Iowa
99XJ
http://7slotgrille.com/jeepers/lwb/kevinxj/index.html
discription of it, all of them show 3" offset, there is a link
for live help on the site, may try that. The trans mount
should be available locally at a parts store, eg: Autozone or
Napa
Kevin in Iowa
99XJ
http://7slotgrille.com/jeepers/lwb/kevinxj/index.html
Thread
Thread Starter
Forum
Replies
Last Post
claudel
Jeep Mailing List
0
05-11-2005 12:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)