Pinion Seals
 

Just out of curiosity , is it unusual for both back pinion seals to
start leaking at the same time? 2000TJ at 76k.
Joe Carroll
2K-TJ

There are some simple truths...And the dogs know what they are."
Joseph Duemer

Re: Pinion Seals
 

Both?




"Joe Carroll" <jdcarroll2@NOSPAMearthlink.net> wrote in message
news:dbct611q1kmd1ni4qto71vgjhe86shdjac@4ax.com...
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer

Re: Pinion Seals
 

Both?




"Joe Carroll" <jdcarroll2@NOSPAMearthlink.net> wrote in message
news:dbct611q1kmd1ni4qto71vgjhe86shdjac@4ax.com...
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer

Re: Pinion Seals
 

Both?




"Joe Carroll" <jdcarroll2@NOSPAMearthlink.net> wrote in message
news:dbct611q1kmd1ni4qto71vgjhe86shdjac@4ax.com...
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer

Re: Pinion Seals
 

Both?




"Joe Carroll" <jdcarroll2@NOSPAMearthlink.net> wrote in message
news:dbct611q1kmd1ni4qto71vgjhe86shdjac@4ax.com...
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer

Re: Pinion Seals
 

Dana 35c? http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------

Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer

Re: Pinion Seals
 

Dana 35c? http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------

Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer

Re: Pinion Seals
 

Dana 35c? http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------

Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer

Re: Pinion Seals
 

Dana 35c? http://www.----------.com/dana35c/
God Bless America, ßill O|||||||O
mailto:--------------------

Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer

Re: Pinion Seals
 

That normally comes along with some bad u-joints or a bent driveshaft
causing vibration and yes, I see it lots.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer

Re: Pinion Seals
 

That normally comes along with some bad u-joints or a bent driveshaft
causing vibration and yes, I see it lots.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer

Re: Pinion Seals
 

That normally comes along with some bad u-joints or a bent driveshaft
causing vibration and yes, I see it lots.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer

Re: Pinion Seals
 

That normally comes along with some bad u-joints or a bent driveshaft
causing vibration and yes, I see it lots.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Joe Carroll wrote:
>
> Just out of curiosity , is it unusual for both back pinion seals to
> start leaking at the same time? 2000TJ at 76k.
> Joe Carroll
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer

Re: Pinion Seals
 

On Tue, 26 Apr 2005 18:13:45 -0400, Mike Romain <romainm@sympatico.ca>
wrote:

>That normally comes along with some bad u-joints or a bent driveshaft
>causing vibration and yes, I see it lots.
>

Yes 35c. That said I had the output shaft replaced orginally because
of vibration problems along with different drive shaft and new
u-joints. 12 months into new output shaft noise is back but no
noticeable vibration. Thought it was tire noise. checked underneath
and noticed both seals leaking bad.

Re: Pinion Seals
 

On Tue, 26 Apr 2005 18:13:45 -0400, Mike Romain <romainm@sympatico.ca>
wrote:

>That normally comes along with some bad u-joints or a bent driveshaft
>causing vibration and yes, I see it lots.
>

Yes 35c. That said I had the output shaft replaced orginally because
of vibration problems along with different drive shaft and new
u-joints. 12 months into new output shaft noise is back but no
noticeable vibration. Thought it was tire noise. checked underneath
and noticed both seals leaking bad.

Re: Pinion Seals
 

On Tue, 26 Apr 2005 18:13:45 -0400, Mike Romain <romainm@sympatico.ca>
wrote:

>That normally comes along with some bad u-joints or a bent driveshaft
>causing vibration and yes, I see it lots.
>

Yes 35c. That said I had the output shaft replaced orginally because
of vibration problems along with different drive shaft and new
u-joints. 12 months into new output shaft noise is back but no
noticeable vibration. Thought it was tire noise. checked underneath
and noticed both seals leaking bad.

Re: Pinion Seals
 

On Tue, 26 Apr 2005 18:13:45 -0400, Mike Romain <romainm@sympatico.ca>
wrote:

>That normally comes along with some bad u-joints or a bent driveshaft
>causing vibration and yes, I see it lots.
>

Yes 35c. That said I had the output shaft replaced orginally because
of vibration problems along with different drive shaft and new
u-joints. 12 months into new output shaft noise is back but no
noticeable vibration. Thought it was tire noise. checked underneath
and noticed both seals leaking bad.

Re: Pinion Seals
 

On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
<spamcatcher@yahoo.net> wrote:

>Both?
>
yes , at the tranny and the rear-axle

Re: Pinion Seals
 

On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
<spamcatcher@yahoo.net> wrote:

>Both?
>
yes , at the tranny and the rear-axle

Re: Pinion Seals
 

On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
<spamcatcher@yahoo.net> wrote:

>Both?
>
yes , at the tranny and the rear-axle

Re: Pinion Seals
 

On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
<spamcatcher@yahoo.net> wrote:

>Both?
>
yes , at the tranny and the rear-axle

Re: Pinion Seals
 

Got it. But there is only one Pinion and it lives in the diff, the tcase
seal is not a pinion seal. That's what confused me.




"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:qrit61d95npua78mg7jfp6a1pvd19i6up6@4ax.com...
> On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
> >Both?
> >
> yes , at the tranny and the rear-axle

Re: Pinion Seals
 

Got it. But there is only one Pinion and it lives in the diff, the tcase
seal is not a pinion seal. That's what confused me.




"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:qrit61d95npua78mg7jfp6a1pvd19i6up6@4ax.com...
> On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
> >Both?
> >
> yes , at the tranny and the rear-axle

Re: Pinion Seals
 

Got it. But there is only one Pinion and it lives in the diff, the tcase
seal is not a pinion seal. That's what confused me.




"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:qrit61d95npua78mg7jfp6a1pvd19i6up6@4ax.com...
> On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
> >Both?
> >
> yes , at the tranny and the rear-axle

Re: Pinion Seals
 

Got it. But there is only one Pinion and it lives in the diff, the tcase
seal is not a pinion seal. That's what confused me.




"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:qrit61d95npua78mg7jfp6a1pvd19i6up6@4ax.com...
> On Tue, 26 Apr 2005 14:58:10 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
> >Both?
> >
> yes , at the tranny and the rear-axle

Re: Pinion Seals
 

As I'm sure you know it's not your seals that are making the noise.
So replace your Universal Joints, again and make sure their timing, or
balance are good. That the shaft's not bent. Then double check their
angles against: http://www.4xshaft.com/driveline101.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Joe Carroll wrote:
>
> Yes 35c. That said I had the output shaft replaced orginally because
> of vibration problems along with different drive shaft and new
> u-joints. 12 months into new output shaft noise is back but no
> noticeable vibration. Thought it was tire noise. checked underneath
> and noticed both seals leaking bad.

Re: Pinion Seals
 

As I'm sure you know it's not your seals that are making the noise.
So replace your Universal Joints, again and make sure their timing, or
balance are good. That the shaft's not bent. Then double check their
angles against: http://www.4xshaft.com/driveline101.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Joe Carroll wrote:
>
> Yes 35c. That said I had the output shaft replaced orginally because
> of vibration problems along with different drive shaft and new
> u-joints. 12 months into new output shaft noise is back but no
> noticeable vibration. Thought it was tire noise. checked underneath
> and noticed both seals leaking bad.

Re: Pinion Seals
 

As I'm sure you know it's not your seals that are making the noise.
So replace your Universal Joints, again and make sure their timing, or
balance are good. That the shaft's not bent. Then double check their
angles against: http://www.4xshaft.com/driveline101.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Joe Carroll wrote:
>
> Yes 35c. That said I had the output shaft replaced orginally because
> of vibration problems along with different drive shaft and new
> u-joints. 12 months into new output shaft noise is back but no
> noticeable vibration. Thought it was tire noise. checked underneath
> and noticed both seals leaking bad.

Re: Pinion Seals
 

As I'm sure you know it's not your seals that are making the noise.
So replace your Universal Joints, again and make sure their timing, or
balance are good. That the shaft's not bent. Then double check their
angles against: http://www.4xshaft.com/driveline101.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Joe Carroll wrote:
>
> Yes 35c. That said I had the output shaft replaced orginally because
> of vibration problems along with different drive shaft and new
> u-joints. 12 months into new output shaft noise is back but no
> noticeable vibration. Thought it was tire noise. checked underneath
> and noticed both seals leaking bad.

Re: Pinion Seals
 

On Tue, 26 Apr 2005 16:20:51 -0700, "Jeff Strickland"
<spamcatcher@yahoo.net> wrote:

>Got it. But there is only one Pinion and it lives in the diff, the tcase
>seal is not a pinion seal. That's what confused me.
>
Got it, thought they were both pinion seals. What is tcase seal
called?

Re: Pinion Seals
 

On Tue, 26 Apr 2005 16:20:51 -0700, "Jeff Strickland"
<spamcatcher@yahoo.net> wrote:

>Got it. But there is only one Pinion and it lives in the diff, the tcase
>seal is not a pinion seal. That's what confused me.
>
Got it, thought they were both pinion seals. What is tcase seal
called?

Re: Pinion Seals
 

On Tue, 26 Apr 2005 16:20:51 -0700, "Jeff Strickland"
<spamcatcher@yahoo.net> wrote:

>Got it. But there is only one Pinion and it lives in the diff, the tcase
>seal is not a pinion seal. That's what confused me.
>
Got it, thought they were both pinion seals. What is tcase seal
called?

Re: Pinion Seals
 

On Tue, 26 Apr 2005 16:20:51 -0700, "Jeff Strickland"
<spamcatcher@yahoo.net> wrote:

>Got it. But there is only one Pinion and it lives in the diff, the tcase
>seal is not a pinion seal. That's what confused me.
>
Got it, thought they were both pinion seals. What is tcase seal
called?

Re: Pinion Seals
 

A tcase seal...

"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:c0lt61drbhrjfnpds79idhffh41rj3htco@4ax.com...
> On Tue, 26 Apr 2005 16:20:51 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
>>Got it. But there is only one Pinion and it lives in the diff, the tcase
>>seal is not a pinion seal. That's what confused me.
>>
> Got it, thought they were both pinion seals. What is tcase seal
> called?

Re: Pinion Seals
 

A tcase seal...

"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:c0lt61drbhrjfnpds79idhffh41rj3htco@4ax.com...
> On Tue, 26 Apr 2005 16:20:51 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
>>Got it. But there is only one Pinion and it lives in the diff, the tcase
>>seal is not a pinion seal. That's what confused me.
>>
> Got it, thought they were both pinion seals. What is tcase seal
> called?

Re: Pinion Seals
 

A tcase seal...

"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:c0lt61drbhrjfnpds79idhffh41rj3htco@4ax.com...
> On Tue, 26 Apr 2005 16:20:51 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
>>Got it. But there is only one Pinion and it lives in the diff, the tcase
>>seal is not a pinion seal. That's what confused me.
>>
> Got it, thought they were both pinion seals. What is tcase seal
> called?

Re: Pinion Seals
 

A tcase seal...

"Joe Carroll" <jdcarroll@qwest.net> wrote in message
news:c0lt61drbhrjfnpds79idhffh41rj3htco@4ax.com...
> On Tue, 26 Apr 2005 16:20:51 -0700, "Jeff Strickland"
> <spamcatcher@yahoo.net> wrote:
>
>>Got it. But there is only one Pinion and it lives in the diff, the tcase
>>seal is not a pinion seal. That's what confused me.
>>
> Got it, thought they were both pinion seals. What is tcase seal
> called?

Re: Pinion Seals
 

that's it!! this just got too complicated for me.

Matt Macchiarolo wrote:
> A tcase seal...
>
> "Joe Carroll" <jdcarroll@qwest.net> wrote in message
> news:c0lt61drbhrjfnpds79idhffh41rj3htco@4ax.com...
> > On Tue, 26 Apr 2005 16:20:51 -0700, "Jeff Strickland"
> > <spamcatcher@yahoo.net> wrote:
> >
> >>Got it. But there is only one Pinion and it lives in the diff, the
tcase
> >>seal is not a pinion seal. That's what confused me.
> >>
> > Got it, thought they were both pinion seals. What is tcase seal
> > called?

Re: Pinion Seals
 

that's it!! this just got too complicated for me.

Matt Macchiarolo wrote:
> A tcase seal...
>
> "Joe Carroll" <jdcarroll@qwest.net> wrote in message
> news:c0lt61drbhrjfnpds79idhffh41rj3htco@4ax.com...
> > On Tue, 26 Apr 2005 16:20:51 -0700, "Jeff Strickland"
> > <spamcatcher@yahoo.net> wrote:
> >
> >>Got it. But there is only one Pinion and it lives in the diff, the
tcase
> >>seal is not a pinion seal. That's what confused me.
> >>
> > Got it, thought they were both pinion seals. What is tcase seal
> > called?

Re: Pinion Seals
 

that's it!! this just got too complicated for me.

Matt Macchiarolo wrote:
> A tcase seal...
>
> "Joe Carroll" <jdcarroll@qwest.net> wrote in message
> news:c0lt61drbhrjfnpds79idhffh41rj3htco@4ax.com...
> > On Tue, 26 Apr 2005 16:20:51 -0700, "Jeff Strickland"
> > <spamcatcher@yahoo.net> wrote:
> >
> >>Got it. But there is only one Pinion and it lives in the diff, the
tcase
> >>seal is not a pinion seal. That's what confused me.
> >>
> > Got it, thought they were both pinion seals. What is tcase seal
> > called?