Ping > Nathan - welding question
01-20-2004, 08:50 PM
#91
Guest
Posts: n/a
Re: Ping > Nathan - welding question
I agree with Nathan. That is one cool design. I've been looking around for a
better hinge ever since I built my bumper:
http://www.monograms-inc.com/jeep/jeepin-bumper.htm
Last year I rebuilt the hinge because the bearings had rusted into a solid mass
of iron oxide. <lol> This time I used bronze oil-lite bushings and while they
are better than the timpken bearings I used previously there is still room for
improvement. This idea has all kinds of merit. You could used sealed bearing
cups, or keep the zerk fitting and grease the hinge every now and then.
Good job, . . . and back to lurking for me ;-)
Dean
On Tue, 20 Jan 2004 22:31:58 GMT, "Nathan Collier" <JeepMail@7SlotGrille.com>
wrote:
>jerry,
>ive been in the jeeping game for awhile and i thought i had just about seen
>it all until i saw your tire mount. what awesome functional innovation!
>prior to seeing your pictures i think tom rein's shifter
>(http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing i
>had ever seen on any jeep. with a little modification, your design says
>"JEEP" to any real jeeper that sees it. its a pleasure to host these pics,
>and ill most definately be copying at least most of your design.
>
>ive set up a temporary page just to show off the pics of your bumper. if
>you would like it to be a permanent page linked to off the main jeepers page
>just let me know. maybe send me some pics of the front with some details.
>
>http://7slotgrille.com/jeepers/yj/jerry
>
>GOOD JOB!
better hinge ever since I built my bumper:
http://www.monograms-inc.com/jeep/jeepin-bumper.htm
Last year I rebuilt the hinge because the bearings had rusted into a solid mass
of iron oxide. <lol> This time I used bronze oil-lite bushings and while they
are better than the timpken bearings I used previously there is still room for
improvement. This idea has all kinds of merit. You could used sealed bearing
cups, or keep the zerk fitting and grease the hinge every now and then.
Good job, . . . and back to lurking for me ;-)
Dean
On Tue, 20 Jan 2004 22:31:58 GMT, "Nathan Collier" <JeepMail@7SlotGrille.com>
wrote:
>jerry,
>ive been in the jeeping game for awhile and i thought i had just about seen
>it all until i saw your tire mount. what awesome functional innovation!
>prior to seeing your pictures i think tom rein's shifter
>(http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing i
>had ever seen on any jeep. with a little modification, your design says
>"JEEP" to any real jeeper that sees it. its a pleasure to host these pics,
>and ill most definately be copying at least most of your design.
>
>ive set up a temporary page just to show off the pics of your bumper. if
>you would like it to be a permanent page linked to off the main jeepers page
>just let me know. maybe send me some pics of the front with some details.
>
>http://7slotgrille.com/jeepers/yj/jerry
>
>GOOD JOB!
01-20-2004, 09:18 PM
#92
Guest
Posts: n/a
Re: Ping > Nathan - welding question
Thanks for all the kind words.
Jerry
"Dean" <do.not.email.me@post.it.to.the.group.com> wrote in message
news:qmlr00l5gcgklq7mvvrpa4birp058kmg9a@4ax.com...
> I agree with Nathan. That is one cool design. I've been looking around
for a
> better hinge ever since I built my bumper:
>
> http://www.monograms-inc.com/jeep/jeepin-bumper.htm
>
> Last year I rebuilt the hinge because the bearings had rusted into a solid
mass
> of iron oxide. <lol> This time I used bronze oil-lite bushings and while
they
> are better than the timpken bearings I used previously there is still room
for
> improvement. This idea has all kinds of merit. You could used sealed
bearing
> cups, or keep the zerk fitting and grease the hinge every now and then.
>
> Good job, . . . and back to lurking for me ;-)
>
> Dean
>
>
> On Tue, 20 Jan 2004 22:31:58 GMT, "Nathan Collier"
<JeepMail@7SlotGrille.com>
> wrote:
>
> >jerry,
> >ive been in the jeeping game for awhile and i thought i had just about
seen
> >it all until i saw your tire mount. what awesome functional innovation!
> >prior to seeing your pictures i think tom rein's shifter
> >(http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing
i
> >had ever seen on any jeep. with a little modification, your design says
> >"JEEP" to any real jeeper that sees it. its a pleasure to host these
pics,
> >and ill most definately be copying at least most of your design.
> >
> >ive set up a temporary page just to show off the pics of your bumper. if
> >you would like it to be a permanent page linked to off the main jeepers
page
> >just let me know. maybe send me some pics of the front with some
details.
> >
> >http://7slotgrille.com/jeepers/yj/jerry
> >
> >GOOD JOB!
>
Jerry
"Dean" <do.not.email.me@post.it.to.the.group.com> wrote in message
news:qmlr00l5gcgklq7mvvrpa4birp058kmg9a@4ax.com...
> I agree with Nathan. That is one cool design. I've been looking around
for a
> better hinge ever since I built my bumper:
>
> http://www.monograms-inc.com/jeep/jeepin-bumper.htm
>
> Last year I rebuilt the hinge because the bearings had rusted into a solid
mass
> of iron oxide. <lol> This time I used bronze oil-lite bushings and while
they
> are better than the timpken bearings I used previously there is still room
for
> improvement. This idea has all kinds of merit. You could used sealed
bearing
> cups, or keep the zerk fitting and grease the hinge every now and then.
>
> Good job, . . . and back to lurking for me ;-)
>
> Dean
>
>
> On Tue, 20 Jan 2004 22:31:58 GMT, "Nathan Collier"
<JeepMail@7SlotGrille.com>
> wrote:
>
> >jerry,
> >ive been in the jeeping game for awhile and i thought i had just about
seen
> >it all until i saw your tire mount. what awesome functional innovation!
> >prior to seeing your pictures i think tom rein's shifter
> >(http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing
i
> >had ever seen on any jeep. with a little modification, your design says
> >"JEEP" to any real jeeper that sees it. its a pleasure to host these
pics,
> >and ill most definately be copying at least most of your design.
> >
> >ive set up a temporary page just to show off the pics of your bumper. if
> >you would like it to be a permanent page linked to off the main jeepers
page
> >just let me know. maybe send me some pics of the front with some
details.
> >
> >http://7slotgrille.com/jeepers/yj/jerry
> >
> >GOOD JOB!
>
01-20-2004, 09:18 PM
#93
Guest
Posts: n/a
Re: Ping > Nathan - welding question
Thanks for all the kind words.
Jerry
"Dean" <do.not.email.me@post.it.to.the.group.com> wrote in message
news:qmlr00l5gcgklq7mvvrpa4birp058kmg9a@4ax.com...
> I agree with Nathan. That is one cool design. I've been looking around
for a
> better hinge ever since I built my bumper:
>
> http://www.monograms-inc.com/jeep/jeepin-bumper.htm
>
> Last year I rebuilt the hinge because the bearings had rusted into a solid
mass
> of iron oxide. <lol> This time I used bronze oil-lite bushings and while
they
> are better than the timpken bearings I used previously there is still room
for
> improvement. This idea has all kinds of merit. You could used sealed
bearing
> cups, or keep the zerk fitting and grease the hinge every now and then.
>
> Good job, . . . and back to lurking for me ;-)
>
> Dean
>
>
> On Tue, 20 Jan 2004 22:31:58 GMT, "Nathan Collier"
<JeepMail@7SlotGrille.com>
> wrote:
>
> >jerry,
> >ive been in the jeeping game for awhile and i thought i had just about
seen
> >it all until i saw your tire mount. what awesome functional innovation!
> >prior to seeing your pictures i think tom rein's shifter
> >(http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing
i
> >had ever seen on any jeep. with a little modification, your design says
> >"JEEP" to any real jeeper that sees it. its a pleasure to host these
pics,
> >and ill most definately be copying at least most of your design.
> >
> >ive set up a temporary page just to show off the pics of your bumper. if
> >you would like it to be a permanent page linked to off the main jeepers
page
> >just let me know. maybe send me some pics of the front with some
details.
> >
> >http://7slotgrille.com/jeepers/yj/jerry
> >
> >GOOD JOB!
>
Jerry
"Dean" <do.not.email.me@post.it.to.the.group.com> wrote in message
news:qmlr00l5gcgklq7mvvrpa4birp058kmg9a@4ax.com...
> I agree with Nathan. That is one cool design. I've been looking around
for a
> better hinge ever since I built my bumper:
>
> http://www.monograms-inc.com/jeep/jeepin-bumper.htm
>
> Last year I rebuilt the hinge because the bearings had rusted into a solid
mass
> of iron oxide. <lol> This time I used bronze oil-lite bushings and while
they
> are better than the timpken bearings I used previously there is still room
for
> improvement. This idea has all kinds of merit. You could used sealed
bearing
> cups, or keep the zerk fitting and grease the hinge every now and then.
>
> Good job, . . . and back to lurking for me ;-)
>
> Dean
>
>
> On Tue, 20 Jan 2004 22:31:58 GMT, "Nathan Collier"
<JeepMail@7SlotGrille.com>
> wrote:
>
> >jerry,
> >ive been in the jeeping game for awhile and i thought i had just about
seen
> >it all until i saw your tire mount. what awesome functional innovation!
> >prior to seeing your pictures i think tom rein's shifter
> >(http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing
i
> >had ever seen on any jeep. with a little modification, your design says
> >"JEEP" to any real jeeper that sees it. its a pleasure to host these
pics,
> >and ill most definately be copying at least most of your design.
> >
> >ive set up a temporary page just to show off the pics of your bumper. if
> >you would like it to be a permanent page linked to off the main jeepers
page
> >just let me know. maybe send me some pics of the front with some
details.
> >
> >http://7slotgrille.com/jeepers/yj/jerry
> >
> >GOOD JOB!
>
01-20-2004, 09:18 PM
#94
Guest
Posts: n/a
Re: Ping > Nathan - welding question
Thanks for all the kind words.
Jerry
"Dean" <do.not.email.me@post.it.to.the.group.com> wrote in message
news:qmlr00l5gcgklq7mvvrpa4birp058kmg9a@4ax.com...
> I agree with Nathan. That is one cool design. I've been looking around
for a
> better hinge ever since I built my bumper:
>
> http://www.monograms-inc.com/jeep/jeepin-bumper.htm
>
> Last year I rebuilt the hinge because the bearings had rusted into a solid
mass
> of iron oxide. <lol> This time I used bronze oil-lite bushings and while
they
> are better than the timpken bearings I used previously there is still room
for
> improvement. This idea has all kinds of merit. You could used sealed
bearing
> cups, or keep the zerk fitting and grease the hinge every now and then.
>
> Good job, . . . and back to lurking for me ;-)
>
> Dean
>
>
> On Tue, 20 Jan 2004 22:31:58 GMT, "Nathan Collier"
<JeepMail@7SlotGrille.com>
> wrote:
>
> >jerry,
> >ive been in the jeeping game for awhile and i thought i had just about
seen
> >it all until i saw your tire mount. what awesome functional innovation!
> >prior to seeing your pictures i think tom rein's shifter
> >(http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing
i
> >had ever seen on any jeep. with a little modification, your design says
> >"JEEP" to any real jeeper that sees it. its a pleasure to host these
pics,
> >and ill most definately be copying at least most of your design.
> >
> >ive set up a temporary page just to show off the pics of your bumper. if
> >you would like it to be a permanent page linked to off the main jeepers
page
> >just let me know. maybe send me some pics of the front with some
details.
> >
> >http://7slotgrille.com/jeepers/yj/jerry
> >
> >GOOD JOB!
>
Jerry
"Dean" <do.not.email.me@post.it.to.the.group.com> wrote in message
news:qmlr00l5gcgklq7mvvrpa4birp058kmg9a@4ax.com...
> I agree with Nathan. That is one cool design. I've been looking around
for a
> better hinge ever since I built my bumper:
>
> http://www.monograms-inc.com/jeep/jeepin-bumper.htm
>
> Last year I rebuilt the hinge because the bearings had rusted into a solid
mass
> of iron oxide. <lol> This time I used bronze oil-lite bushings and while
they
> are better than the timpken bearings I used previously there is still room
for
> improvement. This idea has all kinds of merit. You could used sealed
bearing
> cups, or keep the zerk fitting and grease the hinge every now and then.
>
> Good job, . . . and back to lurking for me ;-)
>
> Dean
>
>
> On Tue, 20 Jan 2004 22:31:58 GMT, "Nathan Collier"
<JeepMail@7SlotGrille.com>
> wrote:
>
> >jerry,
> >ive been in the jeeping game for awhile and i thought i had just about
seen
> >it all until i saw your tire mount. what awesome functional innovation!
> >prior to seeing your pictures i think tom rein's shifter
> >(http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing
i
> >had ever seen on any jeep. with a little modification, your design says
> >"JEEP" to any real jeeper that sees it. its a pleasure to host these
pics,
> >and ill most definately be copying at least most of your design.
> >
> >ive set up a temporary page just to show off the pics of your bumper. if
> >you would like it to be a permanent page linked to off the main jeepers
page
> >just let me know. maybe send me some pics of the front with some
details.
> >
> >http://7slotgrille.com/jeepers/yj/jerry
> >
> >GOOD JOB!
>
01-20-2004, 09:30 PM
#95
Guest
Posts: n/a
Re: Ping > Nathan - welding question
I really appreciate your compliments, it means much knowing that a
weldor/fabricator by trade found merit in something that I did out in the
garage.
I would be honored to be added to your site in a more permanent fashion.
Thank you for inviting me. I will take some more pics of the whole vehicle
in the near future and forward them to you. YJ is a constant
work-in-progress, but still the favorite daily driver for myself and wifey.
Thanks again for all of your compliments.
Jerry
"Nathan Collier" <JeepMail@7SlotGrille.com> wrote in message
news:y%hPb.28424$cQ1.2013040@twister.southeast.rr. com...
> jerry,
> ive been in the jeeping game for awhile and i thought i had just about
seen
> it all until i saw your tire mount. what awesome functional innovation!
> prior to seeing your pictures i think tom rein's shifter
> (http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing
i
> had ever seen on any jeep. with a little modification, your design says
> "JEEP" to any real jeeper that sees it. its a pleasure to host these
pics,
> and ill most definately be copying at least most of your design.
>
> ive set up a temporary page just to show off the pics of your bumper. if
> you would like it to be a permanent page linked to off the main jeepers
page
> just let me know. maybe send me some pics of the front with some details.
>
> http://7slotgrille.com/jeepers/yj/jerry
>
> GOOD JOB!
> --
> Nathan W. Collier
> http://7SlotGrille.com
> http://UtilityOffRoad.com
>
>
>
weldor/fabricator by trade found merit in something that I did out in the
garage.
I would be honored to be added to your site in a more permanent fashion.
Thank you for inviting me. I will take some more pics of the whole vehicle
in the near future and forward them to you. YJ is a constant
work-in-progress, but still the favorite daily driver for myself and wifey.
Thanks again for all of your compliments.
Jerry
"Nathan Collier" <JeepMail@7SlotGrille.com> wrote in message
news:y%hPb.28424$cQ1.2013040@twister.southeast.rr. com...
> jerry,
> ive been in the jeeping game for awhile and i thought i had just about
seen
> it all until i saw your tire mount. what awesome functional innovation!
> prior to seeing your pictures i think tom rein's shifter
> (http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing
i
> had ever seen on any jeep. with a little modification, your design says
> "JEEP" to any real jeeper that sees it. its a pleasure to host these
pics,
> and ill most definately be copying at least most of your design.
>
> ive set up a temporary page just to show off the pics of your bumper. if
> you would like it to be a permanent page linked to off the main jeepers
page
> just let me know. maybe send me some pics of the front with some details.
>
> http://7slotgrille.com/jeepers/yj/jerry
>
> GOOD JOB!
> --
> Nathan W. Collier
> http://7SlotGrille.com
> http://UtilityOffRoad.com
>
>
>
01-20-2004, 09:30 PM
#96
Guest
Posts: n/a
Re: Ping > Nathan - welding question
I really appreciate your compliments, it means much knowing that a
weldor/fabricator by trade found merit in something that I did out in the
garage.
I would be honored to be added to your site in a more permanent fashion.
Thank you for inviting me. I will take some more pics of the whole vehicle
in the near future and forward them to you. YJ is a constant
work-in-progress, but still the favorite daily driver for myself and wifey.
Thanks again for all of your compliments.
Jerry
"Nathan Collier" <JeepMail@7SlotGrille.com> wrote in message
news:y%hPb.28424$cQ1.2013040@twister.southeast.rr. com...
> jerry,
> ive been in the jeeping game for awhile and i thought i had just about
seen
> it all until i saw your tire mount. what awesome functional innovation!
> prior to seeing your pictures i think tom rein's shifter
> (http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing
i
> had ever seen on any jeep. with a little modification, your design says
> "JEEP" to any real jeeper that sees it. its a pleasure to host these
pics,
> and ill most definately be copying at least most of your design.
>
> ive set up a temporary page just to show off the pics of your bumper. if
> you would like it to be a permanent page linked to off the main jeepers
page
> just let me know. maybe send me some pics of the front with some details.
>
> http://7slotgrille.com/jeepers/yj/jerry
>
> GOOD JOB!
> --
> Nathan W. Collier
> http://7SlotGrille.com
> http://UtilityOffRoad.com
>
>
>
weldor/fabricator by trade found merit in something that I did out in the
garage.
I would be honored to be added to your site in a more permanent fashion.
Thank you for inviting me. I will take some more pics of the whole vehicle
in the near future and forward them to you. YJ is a constant
work-in-progress, but still the favorite daily driver for myself and wifey.
Thanks again for all of your compliments.
Jerry
"Nathan Collier" <JeepMail@7SlotGrille.com> wrote in message
news:y%hPb.28424$cQ1.2013040@twister.southeast.rr. com...
> jerry,
> ive been in the jeeping game for awhile and i thought i had just about
seen
> it all until i saw your tire mount. what awesome functional innovation!
> prior to seeing your pictures i think tom rein's shifter
> (http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing
i
> had ever seen on any jeep. with a little modification, your design says
> "JEEP" to any real jeeper that sees it. its a pleasure to host these
pics,
> and ill most definately be copying at least most of your design.
>
> ive set up a temporary page just to show off the pics of your bumper. if
> you would like it to be a permanent page linked to off the main jeepers
page
> just let me know. maybe send me some pics of the front with some details.
>
> http://7slotgrille.com/jeepers/yj/jerry
>
> GOOD JOB!
> --
> Nathan W. Collier
> http://7SlotGrille.com
> http://UtilityOffRoad.com
>
>
>
01-20-2004, 09:30 PM
#97
Guest
Posts: n/a
Re: Ping > Nathan - welding question
I really appreciate your compliments, it means much knowing that a
weldor/fabricator by trade found merit in something that I did out in the
garage.
I would be honored to be added to your site in a more permanent fashion.
Thank you for inviting me. I will take some more pics of the whole vehicle
in the near future and forward them to you. YJ is a constant
work-in-progress, but still the favorite daily driver for myself and wifey.
Thanks again for all of your compliments.
Jerry
"Nathan Collier" <JeepMail@7SlotGrille.com> wrote in message
news:y%hPb.28424$cQ1.2013040@twister.southeast.rr. com...
> jerry,
> ive been in the jeeping game for awhile and i thought i had just about
seen
> it all until i saw your tire mount. what awesome functional innovation!
> prior to seeing your pictures i think tom rein's shifter
> (http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing
i
> had ever seen on any jeep. with a little modification, your design says
> "JEEP" to any real jeeper that sees it. its a pleasure to host these
pics,
> and ill most definately be copying at least most of your design.
>
> ive set up a temporary page just to show off the pics of your bumper. if
> you would like it to be a permanent page linked to off the main jeepers
page
> just let me know. maybe send me some pics of the front with some details.
>
> http://7slotgrille.com/jeepers/yj/jerry
>
> GOOD JOB!
> --
> Nathan W. Collier
> http://7SlotGrille.com
> http://UtilityOffRoad.com
>
>
>
weldor/fabricator by trade found merit in something that I did out in the
garage.
I would be honored to be added to your site in a more permanent fashion.
Thank you for inviting me. I will take some more pics of the whole vehicle
in the near future and forward them to you. YJ is a constant
work-in-progress, but still the favorite daily driver for myself and wifey.
Thanks again for all of your compliments.
Jerry
"Nathan Collier" <JeepMail@7SlotGrille.com> wrote in message
news:y%hPb.28424$cQ1.2013040@twister.southeast.rr. com...
> jerry,
> ive been in the jeeping game for awhile and i thought i had just about
seen
> it all until i saw your tire mount. what awesome functional innovation!
> prior to seeing your pictures i think tom rein's shifter
> (http://7slotgrille.com/jeepers/tj/tom/5.jpg) was about the coolest thing
i
> had ever seen on any jeep. with a little modification, your design says
> "JEEP" to any real jeeper that sees it. its a pleasure to host these
pics,
> and ill most definately be copying at least most of your design.
>
> ive set up a temporary page just to show off the pics of your bumper. if
> you would like it to be a permanent page linked to off the main jeepers
page
> just let me know. maybe send me some pics of the front with some details.
>
> http://7slotgrille.com/jeepers/yj/jerry
>
> GOOD JOB!
> --
> Nathan W. Collier
> http://7SlotGrille.com
> http://UtilityOffRoad.com
>
>
>
01-20-2004, 09:46 PM
#98
Guest
Posts: n/a
Re: Ping > Nathan - welding question
"Jerry Newton" <figatmcttelecom.com> wrote in message
news:400de36a_1@newspeer2.tds.net...
> I really appreciate your compliments
all i did was call it like i see it brother, youre the one that built one
hell of a tire carrier! jeepers are unique in many ways...but the most
prominant (to me) being the preference of raw simplistic function over how
"pretty" something is. your tire carrier SCREAMS "jeeper" and would look
out of place on any other type of vehicle.
> I will take some more pics of the whole vehicle
> in the near future and forward them to you.
good deal....ill leave the page as is and add the frontal pictures to the
page and link it off the main jeepers page.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
news:400de36a_1@newspeer2.tds.net...
> I really appreciate your compliments
all i did was call it like i see it brother, youre the one that built one
hell of a tire carrier! jeepers are unique in many ways...but the most
prominant (to me) being the preference of raw simplistic function over how
"pretty" something is. your tire carrier SCREAMS "jeeper" and would look
out of place on any other type of vehicle.
> I will take some more pics of the whole vehicle
> in the near future and forward them to you.
good deal....ill leave the page as is and add the frontal pictures to the
page and link it off the main jeepers page.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
01-20-2004, 09:46 PM
#99
Guest
Posts: n/a
Re: Ping > Nathan - welding question
"Jerry Newton" <figatmcttelecom.com> wrote in message
news:400de36a_1@newspeer2.tds.net...
> I really appreciate your compliments
all i did was call it like i see it brother, youre the one that built one
hell of a tire carrier! jeepers are unique in many ways...but the most
prominant (to me) being the preference of raw simplistic function over how
"pretty" something is. your tire carrier SCREAMS "jeeper" and would look
out of place on any other type of vehicle.
> I will take some more pics of the whole vehicle
> in the near future and forward them to you.
good deal....ill leave the page as is and add the frontal pictures to the
page and link it off the main jeepers page.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
news:400de36a_1@newspeer2.tds.net...
> I really appreciate your compliments
all i did was call it like i see it brother, youre the one that built one
hell of a tire carrier! jeepers are unique in many ways...but the most
prominant (to me) being the preference of raw simplistic function over how
"pretty" something is. your tire carrier SCREAMS "jeeper" and would look
out of place on any other type of vehicle.
> I will take some more pics of the whole vehicle
> in the near future and forward them to you.
good deal....ill leave the page as is and add the frontal pictures to the
page and link it off the main jeepers page.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
01-20-2004, 09:46 PM
#100
Guest
Posts: n/a
Re: Ping > Nathan - welding question
"Jerry Newton" <figatmcttelecom.com> wrote in message
news:400de36a_1@newspeer2.tds.net...
> I really appreciate your compliments
all i did was call it like i see it brother, youre the one that built one
hell of a tire carrier! jeepers are unique in many ways...but the most
prominant (to me) being the preference of raw simplistic function over how
"pretty" something is. your tire carrier SCREAMS "jeeper" and would look
out of place on any other type of vehicle.
> I will take some more pics of the whole vehicle
> in the near future and forward them to you.
good deal....ill leave the page as is and add the frontal pictures to the
page and link it off the main jeepers page.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com
news:400de36a_1@newspeer2.tds.net...
> I really appreciate your compliments
all i did was call it like i see it brother, youre the one that built one
hell of a tire carrier! jeepers are unique in many ways...but the most
prominant (to me) being the preference of raw simplistic function over how
"pretty" something is. your tire carrier SCREAMS "jeeper" and would look
out of place on any other type of vehicle.
> I will take some more pics of the whole vehicle
> in the near future and forward them to you.
good deal....ill leave the page as is and add the frontal pictures to the
page and link it off the main jeepers page.
--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com