Ping Jerry Bransford.
Guest
Posts: n/a
Ping Jerry Bransford.
>The ONLY thing in a 2000 TJ's front-end that can be aligned is the
>toe-in. Without using aftermarket parts, the caster and camber angles
>are fixed and not adjustable.
>
>The good news is you can easily and totally accurately set your own
>toe-in. I haven't paid to have my toe-in set in years since learning
>how to do my own. Set your own toe-in to 1/8" by using the easy
>instructions at http://www.4x4xplor.com/alignment.html All you need
>is a tape measure, a wrench, and a big set of pliers. A friend to hold
>one end of the tape measure while you measure is helpful. No worries,
>done with a little care this technique will produce a toe-in setting
>just as accurately as the high-school dropout at the local alignment
>shop can produce. That webpage also shows how to center your own
>steering wheel
Jerry
How much play should you have in the bushing where the tie rod
attaches to the back of the wheel?
Joe Carroll
2K-TJ
There are some simple truths...And the dogs know what they are."
Joseph Duemer
>toe-in. Without using aftermarket parts, the caster and camber angles
>are fixed and not adjustable.
>
>The good news is you can easily and totally accurately set your own
>toe-in. I haven't paid to have my toe-in set in years since learning
>how to do my own. Set your own toe-in to 1/8" by using the easy
>instructions at http://www.4x4xplor.com/alignment.html All you need
>is a tape measure, a wrench, and a big set of pliers. A friend to hold
>one end of the tape measure while you measure is helpful. No worries,
>done with a little care this technique will produce a toe-in setting
>just as accurately as the high-school dropout at the local alignment
>shop can produce. That webpage also shows how to center your own
>steering wheel
Jerry
How much play should you have in the bushing where the tie rod
attaches to the back of the wheel?
Joe Carroll
2K-TJ
There are some simple truths...And the dogs know what they are."
Joseph Duemer
Guest
Posts: n/a
Re: Ping Jerry Bransford.
That's connected via a ball joint so there will be some movement at the
ball joint. But it shouldn't rattle or have any slop in it, just where
the cup part is supposed to be able to move around the ball part of the
joint.
Jerry
Joe Carroll wrote:
>>The ONLY thing in a 2000 TJ's front-end that can be aligned is the
>>toe-in. Without using aftermarket parts, the caster and camber angles
>>are fixed and not adjustable.
>>
>>The good news is you can easily and totally accurately set your own
>>toe-in. I haven't paid to have my toe-in set in years since learning
>>how to do my own. Set your own toe-in to 1/8" by using the easy
>>instructions at http://www.4x4xplor.com/alignment.html All you need
>>is a tape measure, a wrench, and a big set of pliers. A friend to hold
>>one end of the tape measure while you measure is helpful. No worries,
>>done with a little care this technique will produce a toe-in setting
>>just as accurately as the high-school dropout at the local alignment
>>shop can produce. That webpage also shows how to center your own
>>steering wheel
>
>
> Jerry
> How much play should you have in the bushing where the tie rod
> attaches to the back of the wheel?
>
> Joe Carroll
>
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
ball joint. But it shouldn't rattle or have any slop in it, just where
the cup part is supposed to be able to move around the ball part of the
joint.
Jerry
Joe Carroll wrote:
>>The ONLY thing in a 2000 TJ's front-end that can be aligned is the
>>toe-in. Without using aftermarket parts, the caster and camber angles
>>are fixed and not adjustable.
>>
>>The good news is you can easily and totally accurately set your own
>>toe-in. I haven't paid to have my toe-in set in years since learning
>>how to do my own. Set your own toe-in to 1/8" by using the easy
>>instructions at http://www.4x4xplor.com/alignment.html All you need
>>is a tape measure, a wrench, and a big set of pliers. A friend to hold
>>one end of the tape measure while you measure is helpful. No worries,
>>done with a little care this technique will produce a toe-in setting
>>just as accurately as the high-school dropout at the local alignment
>>shop can produce. That webpage also shows how to center your own
>>steering wheel
>
>
> Jerry
> How much play should you have in the bushing where the tie rod
> attaches to the back of the wheel?
>
> Joe Carroll
>
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: Ping Jerry Bransford.
That's connected via a ball joint so there will be some movement at the
ball joint. But it shouldn't rattle or have any slop in it, just where
the cup part is supposed to be able to move around the ball part of the
joint.
Jerry
Joe Carroll wrote:
>>The ONLY thing in a 2000 TJ's front-end that can be aligned is the
>>toe-in. Without using aftermarket parts, the caster and camber angles
>>are fixed and not adjustable.
>>
>>The good news is you can easily and totally accurately set your own
>>toe-in. I haven't paid to have my toe-in set in years since learning
>>how to do my own. Set your own toe-in to 1/8" by using the easy
>>instructions at http://www.4x4xplor.com/alignment.html All you need
>>is a tape measure, a wrench, and a big set of pliers. A friend to hold
>>one end of the tape measure while you measure is helpful. No worries,
>>done with a little care this technique will produce a toe-in setting
>>just as accurately as the high-school dropout at the local alignment
>>shop can produce. That webpage also shows how to center your own
>>steering wheel
>
>
> Jerry
> How much play should you have in the bushing where the tie rod
> attaches to the back of the wheel?
>
> Joe Carroll
>
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
ball joint. But it shouldn't rattle or have any slop in it, just where
the cup part is supposed to be able to move around the ball part of the
joint.
Jerry
Joe Carroll wrote:
>>The ONLY thing in a 2000 TJ's front-end that can be aligned is the
>>toe-in. Without using aftermarket parts, the caster and camber angles
>>are fixed and not adjustable.
>>
>>The good news is you can easily and totally accurately set your own
>>toe-in. I haven't paid to have my toe-in set in years since learning
>>how to do my own. Set your own toe-in to 1/8" by using the easy
>>instructions at http://www.4x4xplor.com/alignment.html All you need
>>is a tape measure, a wrench, and a big set of pliers. A friend to hold
>>one end of the tape measure while you measure is helpful. No worries,
>>done with a little care this technique will produce a toe-in setting
>>just as accurately as the high-school dropout at the local alignment
>>shop can produce. That webpage also shows how to center your own
>>steering wheel
>
>
> Jerry
> How much play should you have in the bushing where the tie rod
> attaches to the back of the wheel?
>
> Joe Carroll
>
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: Ping Jerry Bransford.
That's connected via a ball joint so there will be some movement at the
ball joint. But it shouldn't rattle or have any slop in it, just where
the cup part is supposed to be able to move around the ball part of the
joint.
Jerry
Joe Carroll wrote:
>>The ONLY thing in a 2000 TJ's front-end that can be aligned is the
>>toe-in. Without using aftermarket parts, the caster and camber angles
>>are fixed and not adjustable.
>>
>>The good news is you can easily and totally accurately set your own
>>toe-in. I haven't paid to have my toe-in set in years since learning
>>how to do my own. Set your own toe-in to 1/8" by using the easy
>>instructions at http://www.4x4xplor.com/alignment.html All you need
>>is a tape measure, a wrench, and a big set of pliers. A friend to hold
>>one end of the tape measure while you measure is helpful. No worries,
>>done with a little care this technique will produce a toe-in setting
>>just as accurately as the high-school dropout at the local alignment
>>shop can produce. That webpage also shows how to center your own
>>steering wheel
>
>
> Jerry
> How much play should you have in the bushing where the tie rod
> attaches to the back of the wheel?
>
> Joe Carroll
>
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
ball joint. But it shouldn't rattle or have any slop in it, just where
the cup part is supposed to be able to move around the ball part of the
joint.
Jerry
Joe Carroll wrote:
>>The ONLY thing in a 2000 TJ's front-end that can be aligned is the
>>toe-in. Without using aftermarket parts, the caster and camber angles
>>are fixed and not adjustable.
>>
>>The good news is you can easily and totally accurately set your own
>>toe-in. I haven't paid to have my toe-in set in years since learning
>>how to do my own. Set your own toe-in to 1/8" by using the easy
>>instructions at http://www.4x4xplor.com/alignment.html All you need
>>is a tape measure, a wrench, and a big set of pliers. A friend to hold
>>one end of the tape measure while you measure is helpful. No worries,
>>done with a little care this technique will produce a toe-in setting
>>just as accurately as the high-school dropout at the local alignment
>>shop can produce. That webpage also shows how to center your own
>>steering wheel
>
>
> Jerry
> How much play should you have in the bushing where the tie rod
> attaches to the back of the wheel?
>
> Joe Carroll
>
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: Ping Jerry Bransford.
That's connected via a ball joint so there will be some movement at the
ball joint. But it shouldn't rattle or have any slop in it, just where
the cup part is supposed to be able to move around the ball part of the
joint.
Jerry
Joe Carroll wrote:
>>The ONLY thing in a 2000 TJ's front-end that can be aligned is the
>>toe-in. Without using aftermarket parts, the caster and camber angles
>>are fixed and not adjustable.
>>
>>The good news is you can easily and totally accurately set your own
>>toe-in. I haven't paid to have my toe-in set in years since learning
>>how to do my own. Set your own toe-in to 1/8" by using the easy
>>instructions at http://www.4x4xplor.com/alignment.html All you need
>>is a tape measure, a wrench, and a big set of pliers. A friend to hold
>>one end of the tape measure while you measure is helpful. No worries,
>>done with a little care this technique will produce a toe-in setting
>>just as accurately as the high-school dropout at the local alignment
>>shop can produce. That webpage also shows how to center your own
>>steering wheel
>
>
> Jerry
> How much play should you have in the bushing where the tie rod
> attaches to the back of the wheel?
>
> Joe Carroll
>
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
ball joint. But it shouldn't rattle or have any slop in it, just where
the cup part is supposed to be able to move around the ball part of the
joint.
Jerry
Joe Carroll wrote:
>>The ONLY thing in a 2000 TJ's front-end that can be aligned is the
>>toe-in. Without using aftermarket parts, the caster and camber angles
>>are fixed and not adjustable.
>>
>>The good news is you can easily and totally accurately set your own
>>toe-in. I haven't paid to have my toe-in set in years since learning
>>how to do my own. Set your own toe-in to 1/8" by using the easy
>>instructions at http://www.4x4xplor.com/alignment.html All you need
>>is a tape measure, a wrench, and a big set of pliers. A friend to hold
>>one end of the tape measure while you measure is helpful. No worries,
>>done with a little care this technique will produce a toe-in setting
>>just as accurately as the high-school dropout at the local alignment
>>shop can produce. That webpage also shows how to center your own
>>steering wheel
>
>
> Jerry
> How much play should you have in the bushing where the tie rod
> attaches to the back of the wheel?
>
> Joe Carroll
>
> 2K-TJ
>
> There are some simple truths...And the dogs know what they are."
> Joseph Duemer
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: Ping Jerry Bransford.
On Sat, 10 Sep 2005 12:07:08 -0700, Jerry Bransford <jerrypb@***.net>
wrote:
>That's connected via a ball joint so there will be some movement at the
>ball joint. But it shouldn't rattle or have any slop in it, just where
>the cup part is supposed to be able to move around the ball part of the
>joint.
>
>Jerry
>
Thanks,
I just didn't know how much movement it should have. I've got the toe
in set at 1/8 , still have some vibration at 55/60 mph but she's
running straight and true.. I'm guessing bad balance or wheel problem.
Thanks for your help
Joe Carroll
2K-TJ
There are some simple truths...And the dogs know what they are."
Joseph Duemer
wrote:
>That's connected via a ball joint so there will be some movement at the
>ball joint. But it shouldn't rattle or have any slop in it, just where
>the cup part is supposed to be able to move around the ball part of the
>joint.
>
>Jerry
>
Thanks,
I just didn't know how much movement it should have. I've got the toe
in set at 1/8 , still have some vibration at 55/60 mph but she's
running straight and true.. I'm guessing bad balance or wheel problem.
Thanks for your help
Joe Carroll
2K-TJ
There are some simple truths...And the dogs know what they are."
Joseph Duemer
Guest
Posts: n/a
Re: Ping Jerry Bransford.
On Sat, 10 Sep 2005 12:07:08 -0700, Jerry Bransford <jerrypb@***.net>
wrote:
>That's connected via a ball joint so there will be some movement at the
>ball joint. But it shouldn't rattle or have any slop in it, just where
>the cup part is supposed to be able to move around the ball part of the
>joint.
>
>Jerry
>
Thanks,
I just didn't know how much movement it should have. I've got the toe
in set at 1/8 , still have some vibration at 55/60 mph but she's
running straight and true.. I'm guessing bad balance or wheel problem.
Thanks for your help
Joe Carroll
2K-TJ
There are some simple truths...And the dogs know what they are."
Joseph Duemer
wrote:
>That's connected via a ball joint so there will be some movement at the
>ball joint. But it shouldn't rattle or have any slop in it, just where
>the cup part is supposed to be able to move around the ball part of the
>joint.
>
>Jerry
>
Thanks,
I just didn't know how much movement it should have. I've got the toe
in set at 1/8 , still have some vibration at 55/60 mph but she's
running straight and true.. I'm guessing bad balance or wheel problem.
Thanks for your help
Joe Carroll
2K-TJ
There are some simple truths...And the dogs know what they are."
Joseph Duemer
Guest
Posts: n/a
Re: Ping Jerry Bransford.
On Sat, 10 Sep 2005 12:07:08 -0700, Jerry Bransford <jerrypb@***.net>
wrote:
>That's connected via a ball joint so there will be some movement at the
>ball joint. But it shouldn't rattle or have any slop in it, just where
>the cup part is supposed to be able to move around the ball part of the
>joint.
>
>Jerry
>
Thanks,
I just didn't know how much movement it should have. I've got the toe
in set at 1/8 , still have some vibration at 55/60 mph but she's
running straight and true.. I'm guessing bad balance or wheel problem.
Thanks for your help
Joe Carroll
2K-TJ
There are some simple truths...And the dogs know what they are."
Joseph Duemer
wrote:
>That's connected via a ball joint so there will be some movement at the
>ball joint. But it shouldn't rattle or have any slop in it, just where
>the cup part is supposed to be able to move around the ball part of the
>joint.
>
>Jerry
>
Thanks,
I just didn't know how much movement it should have. I've got the toe
in set at 1/8 , still have some vibration at 55/60 mph but she's
running straight and true.. I'm guessing bad balance or wheel problem.
Thanks for your help
Joe Carroll
2K-TJ
There are some simple truths...And the dogs know what they are."
Joseph Duemer
Guest
Posts: n/a
Re: Ping Jerry Bransford.
On Sat, 10 Sep 2005 12:07:08 -0700, Jerry Bransford <jerrypb@***.net>
wrote:
>That's connected via a ball joint so there will be some movement at the
>ball joint. But it shouldn't rattle or have any slop in it, just where
>the cup part is supposed to be able to move around the ball part of the
>joint.
>
>Jerry
>
Thanks,
I just didn't know how much movement it should have. I've got the toe
in set at 1/8 , still have some vibration at 55/60 mph but she's
running straight and true.. I'm guessing bad balance or wheel problem.
Thanks for your help
Joe Carroll
2K-TJ
There are some simple truths...And the dogs know what they are."
Joseph Duemer
wrote:
>That's connected via a ball joint so there will be some movement at the
>ball joint. But it shouldn't rattle or have any slop in it, just where
>the cup part is supposed to be able to move around the ball part of the
>joint.
>
>Jerry
>
Thanks,
I just didn't know how much movement it should have. I've got the toe
in set at 1/8 , still have some vibration at 55/60 mph but she's
running straight and true.. I'm guessing bad balance or wheel problem.
Thanks for your help
Joe Carroll
2K-TJ
There are some simple truths...And the dogs know what they are."
Joseph Duemer
Thread
Thread Starter
Forum
Replies
Last Post
William Oliveri
Jeep Mailing List
6
Nov 13, 2003 10:16 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
