looks great !

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ

"jasonp" <hick@up.com> wrote in message news:%zPlc.269$F04.132@clgrps13...
> I just thought I'd share a picture of my FIRST and current Jeep. Also,
what
> I think is a screaming deal!
>
> I am very new to Jeeps, but I'm loving it. When I first started looking I
> came to this and other newsgroups for information and found great value in
> all of your help.
>
> so...this is my Jeep and What I paid :)
>
> http://www.highriveralberta.com/jas/jeeppic.jpg
>
> I paid $2800CDN ($2050USD) for this badboy
>
> from the previous owner I received receipts for the following work (all
done
> in the last 18 months)
>
> transmission rebuild
> New clutch
> New tires
> Muffler
> battery
> he rebuilt the carb
> 2 new rims
> paint
> some stainless steele goodies (need door hinges)
> Plugs in dec
> other little bits
>
> When I bought it I spent $300 replacing the fuel pump and Ignition control
> module.
>
> I think I got a decent deal and wanted to share it with you guys. Thanks
for
> your help.....and continued help, im sure I'll have more newbie questions.
>
> Jason
>
>

 

The springs need to be done, so I'll lift it at the same time, bigger tires,
some exhaust work...from what I understand once you start it just keeps
going and going, but I'll start with that and see what happens

Jason

"serg" <sfonNOSPAM@yahoo.com> wrote in message
news:c78qac$vor0$1@ID-208627.news.uni-berlin.de...
> looks like u got a good starter-what are the plans for it??
>
> "jasonp" <hick@up.com> wrote in message news:%zPlc.269$F04.132@clgrps13...
> > I just thought I'd share a picture of my FIRST and current Jeep. Also,
> what
> > I think is a screaming deal!
> >
> > I am very new to Jeeps, but I'm loving it. When I first started looking
I
> > came to this and other newsgroups for information and found great value
in
> > all of your help.
> >
> > so...this is my Jeep and What I paid :)
> >
> > http://www.highriveralberta.com/jas/jeeppic.jpg
> >
> > I paid $2800CDN ($2050USD) for this badboy
> >
> > from the previous owner I received receipts for the following work (all
> done
> > in the last 18 months)
> >
> > transmission rebuild
> > New clutch
> > New tires
> > Muffler
> > battery
> > he rebuilt the carb
> > 2 new rims
> > paint
> > some stainless steele goodies (need door hinges)
> > Plugs in dec
> > other little bits
> >
> > When I bought it I spent $300 replacing the fuel pump and Ignition
control
> > module.
> >
> > I think I got a decent deal and wanted to share it with you guys. Thanks
> for
> > your help.....and continued help, im sure I'll have more newbie
questions.
> >
> > Jason
> >
> >
>
>

 

The springs need to be done, so I'll lift it at the same time, bigger tires,
some exhaust work...from what I understand once you start it just keeps
going and going, but I'll start with that and see what happens

Jason

"serg" <sfonNOSPAM@yahoo.com> wrote in message
news:c78qac$vor0$1@ID-208627.news.uni-berlin.de...
> looks like u got a good starter-what are the plans for it??
>
> "jasonp" <hick@up.com> wrote in message news:%zPlc.269$F04.132@clgrps13...
> > I just thought I'd share a picture of my FIRST and current Jeep. Also,
> what
> > I think is a screaming deal!
> >
> > I am very new to Jeeps, but I'm loving it. When I first started looking
I
> > came to this and other newsgroups for information and found great value
in
> > all of your help.
> >
> > so...this is my Jeep and What I paid :)
> >
> > http://www.highriveralberta.com/jas/jeeppic.jpg
> >
> > I paid $2800CDN ($2050USD) for this badboy
> >
> > from the previous owner I received receipts for the following work (all
> done
> > in the last 18 months)
> >
> > transmission rebuild
> > New clutch
> > New tires
> > Muffler
> > battery
> > he rebuilt the carb
> > 2 new rims
> > paint
> > some stainless steele goodies (need door hinges)
> > Plugs in dec
> > other little bits
> >
> > When I bought it I spent $300 replacing the fuel pump and Ignition
control
> > module.
> >
> > I think I got a decent deal and wanted to share it with you guys. Thanks
> for
> > your help.....and continued help, im sure I'll have more newbie
questions.
> >
> > Jason
> >
> >
>
>

 

The springs need to be done, so I'll lift it at the same time, bigger tires,
some exhaust work...from what I understand once you start it just keeps
going and going, but I'll start with that and see what happens

Jason

"serg" <sfonNOSPAM@yahoo.com> wrote in message
news:c78qac$vor0$1@ID-208627.news.uni-berlin.de...
> looks like u got a good starter-what are the plans for it??
>
> "jasonp" <hick@up.com> wrote in message news:%zPlc.269$F04.132@clgrps13...
> > I just thought I'd share a picture of my FIRST and current Jeep. Also,
> what
> > I think is a screaming deal!
> >
> > I am very new to Jeeps, but I'm loving it. When I first started looking
I
> > came to this and other newsgroups for information and found great value
in
> > all of your help.
> >
> > so...this is my Jeep and What I paid :)
> >
> > http://www.highriveralberta.com/jas/jeeppic.jpg
> >
> > I paid $2800CDN ($2050USD) for this badboy
> >
> > from the previous owner I received receipts for the following work (all
> done
> > in the last 18 months)
> >
> > transmission rebuild
> > New clutch
> > New tires
> > Muffler
> > battery
> > he rebuilt the carb
> > 2 new rims
> > paint
> > some stainless steele goodies (need door hinges)
> > Plugs in dec
> > other little bits
> >
> > When I bought it I spent $300 replacing the fuel pump and Ignition
control
> > module.
> >
> > I think I got a decent deal and wanted to share it with you guys. Thanks
> for
> > your help.....and continued help, im sure I'll have more newbie
questions.
> >
> > Jason
> >
> >
>
>

 

The springs need to be done, so I'll lift it at the same time, bigger tires,
some exhaust work...from what I understand once you start it just keeps
going and going, but I'll start with that and see what happens

Jason

"serg" <sfonNOSPAM@yahoo.com> wrote in message
news:c78qac$vor0$1@ID-208627.news.uni-berlin.de...
> looks like u got a good starter-what are the plans for it??
>
> "jasonp" <hick@up.com> wrote in message news:%zPlc.269$F04.132@clgrps13...
> > I just thought I'd share a picture of my FIRST and current Jeep. Also,
> what
> > I think is a screaming deal!
> >
> > I am very new to Jeeps, but I'm loving it. When I first started looking
I
> > came to this and other newsgroups for information and found great value
in
> > all of your help.
> >
> > so...this is my Jeep and What I paid :)
> >
> > http://www.highriveralberta.com/jas/jeeppic.jpg
> >
> > I paid $2800CDN ($2050USD) for this badboy
> >
> > from the previous owner I received receipts for the following work (all
> done
> > in the last 18 months)
> >
> > transmission rebuild
> > New clutch
> > New tires
> > Muffler
> > battery
> > he rebuilt the carb
> > 2 new rims
> > paint
> > some stainless steele goodies (need door hinges)
> > Plugs in dec
> > other little bits
> >
> > When I bought it I spent $300 replacing the fuel pump and Ignition
control
> > module.
> >
> > I think I got a decent deal and wanted to share it with you guys. Thanks
> for
> > your help.....and continued help, im sure I'll have more newbie
questions.
> >
> > Jason
> >
> >
>
>

 

Nice man.

Welcome to the club.

I am in Canada and went to a shop that does springs for big dump trucks
and highway tractors. They were all fighting over who would get to do
the springs in my 'little' truck. The boss laughed and said screw you
all, I'm doing it! LOL!

They ordered stock springs in with a pre-arched 'keeper' leaf and bent
the rest to make a 2.5" lift for me. It was less than $250.00 a set if
I remember right.

I bounce mine hard and they have held up great since 2000.

Canadian Tire also has an amazing number of parts for them including
kits for the carb for about $20.00

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

jasonp wrote:
>
> The springs need to be done, so I'll lift it at the same time, bigger tires,
> some exhaust work...from what I understand once you start it just keeps
> going and going, but I'll start with that and see what happens
>
> Jason
>
> "serg" <sfonNOSPAM@yahoo.com> wrote in message
> news:c78qac$vor0$1@ID-208627.news.uni-berlin.de...
> > looks like u got a good starter-what are the plans for it??
> >
> > "jasonp" <hick@up.com> wrote in message news:%zPlc.269$F04.132@clgrps13...
> > > I just thought I'd share a picture of my FIRST and current Jeep. Also,
> > what
> > > I think is a screaming deal!
> > >
> > > I am very new to Jeeps, but I'm loving it. When I first started looking
> I
> > > came to this and other newsgroups for information and found great value
> in
> > > all of your help.
> > >
> > > so...this is my Jeep and What I paid :)
> > >
> > > http://www.highriveralberta.com/jas/jeeppic.jpg
> > >
> > > I paid $2800CDN ($2050USD) for this badboy
> > >
> > > from the previous owner I received receipts for the following work (all
> > done
> > > in the last 18 months)
> > >
> > > transmission rebuild
> > > New clutch
> > > New tires
> > > Muffler
> > > battery
> > > he rebuilt the carb
> > > 2 new rims
> > > paint
> > > some stainless steele goodies (need door hinges)
> > > Plugs in dec
> > > other little bits
> > >
> > > When I bought it I spent $300 replacing the fuel pump and Ignition
> control
> > > module.
> > >
> > > I think I got a decent deal and wanted to share it with you guys. Thanks
> > for
> > > your help.....and continued help, im sure I'll have more newbie
> questions.
> > >
> > > Jason
> > >
> > >
> >
> >

 

Nice man.

Welcome to the club.

I am in Canada and went to a shop that does springs for big dump trucks
and highway tractors. They were all fighting over who would get to do
the springs in my 'little' truck. The boss laughed and said screw you
all, I'm doing it! LOL!

They ordered stock springs in with a pre-arched 'keeper' leaf and bent
the rest to make a 2.5" lift for me. It was less than $250.00 a set if
I remember right.

I bounce mine hard and they have held up great since 2000.

Canadian Tire also has an amazing number of parts for them including
kits for the carb for about $20.00

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

jasonp wrote:
>
> The springs need to be done, so I'll lift it at the same time, bigger tires,
> some exhaust work...from what I understand once you start it just keeps
> going and going, but I'll start with that and see what happens
>
> Jason
>
> "serg" <sfonNOSPAM@yahoo.com> wrote in message
> news:c78qac$vor0$1@ID-208627.news.uni-berlin.de...
> > looks like u got a good starter-what are the plans for it??
> >
> > "jasonp" <hick@up.com> wrote in message news:%zPlc.269$F04.132@clgrps13...
> > > I just thought I'd share a picture of my FIRST and current Jeep. Also,
> > what
> > > I think is a screaming deal!
> > >
> > > I am very new to Jeeps, but I'm loving it. When I first started looking
> I
> > > came to this and other newsgroups for information and found great value
> in
> > > all of your help.
> > >
> > > so...this is my Jeep and What I paid :)
> > >
> > > http://www.highriveralberta.com/jas/jeeppic.jpg
> > >
> > > I paid $2800CDN ($2050USD) for this badboy
> > >
> > > from the previous owner I received receipts for the following work (all
> > done
> > > in the last 18 months)
> > >
> > > transmission rebuild
> > > New clutch
> > > New tires
> > > Muffler
> > > battery
> > > he rebuilt the carb
> > > 2 new rims
> > > paint
> > > some stainless steele goodies (need door hinges)
> > > Plugs in dec
> > > other little bits
> > >
> > > When I bought it I spent $300 replacing the fuel pump and Ignition
> control
> > > module.
> > >
> > > I think I got a decent deal and wanted to share it with you guys. Thanks
> > for
> > > your help.....and continued help, im sure I'll have more newbie
> questions.
> > >
> > > Jason
> > >
> > >
> >
> >

 

Nice man.

Welcome to the club.

I am in Canada and went to a shop that does springs for big dump trucks
and highway tractors. They were all fighting over who would get to do
the springs in my 'little' truck. The boss laughed and said screw you
all, I'm doing it! LOL!

They ordered stock springs in with a pre-arched 'keeper' leaf and bent
the rest to make a 2.5" lift for me. It was less than $250.00 a set if
I remember right.

I bounce mine hard and they have held up great since 2000.

Canadian Tire also has an amazing number of parts for them including
kits for the carb for about $20.00

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

jasonp wrote:
>
> The springs need to be done, so I'll lift it at the same time, bigger tires,
> some exhaust work...from what I understand once you start it just keeps
> going and going, but I'll start with that and see what happens
>
> Jason
>
> "serg" <sfonNOSPAM@yahoo.com> wrote in message
> news:c78qac$vor0$1@ID-208627.news.uni-berlin.de...
> > looks like u got a good starter-what are the plans for it??
> >
> > "jasonp" <hick@up.com> wrote in message news:%zPlc.269$F04.132@clgrps13...
> > > I just thought I'd share a picture of my FIRST and current Jeep. Also,
> > what
> > > I think is a screaming deal!
> > >
> > > I am very new to Jeeps, but I'm loving it. When I first started looking
> I
> > > came to this and other newsgroups for information and found great value
> in
> > > all of your help.
> > >
> > > so...this is my Jeep and What I paid :)
> > >
> > > http://www.highriveralberta.com/jas/jeeppic.jpg
> > >
> > > I paid $2800CDN ($2050USD) for this badboy
> > >
> > > from the previous owner I received receipts for the following work (all
> > done
> > > in the last 18 months)
> > >
> > > transmission rebuild
> > > New clutch
> > > New tires
> > > Muffler
> > > battery
> > > he rebuilt the carb
> > > 2 new rims
> > > paint
> > > some stainless steele goodies (need door hinges)
> > > Plugs in dec
> > > other little bits
> > >
> > > When I bought it I spent $300 replacing the fuel pump and Ignition
> control
> > > module.
> > >
> > > I think I got a decent deal and wanted to share it with you guys. Thanks
> > for
> > > your help.....and continued help, im sure I'll have more newbie
> questions.
> > >
> > > Jason
> > >
> > >
> >
> >

 

Nice man.

Welcome to the club.

I am in Canada and went to a shop that does springs for big dump trucks
and highway tractors. They were all fighting over who would get to do
the springs in my 'little' truck. The boss laughed and said screw you
all, I'm doing it! LOL!

They ordered stock springs in with a pre-arched 'keeper' leaf and bent
the rest to make a 2.5" lift for me. It was less than $250.00 a set if
I remember right.

I bounce mine hard and they have held up great since 2000.

Canadian Tire also has an amazing number of parts for them including
kits for the carb for about $20.00

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

jasonp wrote:
>
> The springs need to be done, so I'll lift it at the same time, bigger tires,
> some exhaust work...from what I understand once you start it just keeps
> going and going, but I'll start with that and see what happens
>
> Jason
>
> "serg" <sfonNOSPAM@yahoo.com> wrote in message
> news:c78qac$vor0$1@ID-208627.news.uni-berlin.de...
> > looks like u got a good starter-what are the plans for it??
> >
> > "jasonp" <hick@up.com> wrote in message news:%zPlc.269$F04.132@clgrps13...
> > > I just thought I'd share a picture of my FIRST and current Jeep. Also,
> > what
> > > I think is a screaming deal!
> > >
> > > I am very new to Jeeps, but I'm loving it. When I first started looking
> I
> > > came to this and other newsgroups for information and found great value
> in
> > > all of your help.
> > >
> > > so...this is my Jeep and What I paid :)
> > >
> > > http://www.highriveralberta.com/jas/jeeppic.jpg
> > >
> > > I paid $2800CDN ($2050USD) for this badboy
> > >
> > > from the previous owner I received receipts for the following work (all
> > done
> > > in the last 18 months)
> > >
> > > transmission rebuild
> > > New clutch
> > > New tires
> > > Muffler
> > > battery
> > > he rebuilt the carb
> > > 2 new rims
> > > paint
> > > some stainless steele goodies (need door hinges)
> > > Plugs in dec
> > > other little bits
> > >
> > > When I bought it I spent $300 replacing the fuel pump and Ignition
> control
> > > module.
> > >
> > > I think I got a decent deal and wanted to share it with you guys. Thanks
> > for
> > > your help.....and continued help, im sure I'll have more newbie
> questions.
> > >
> > > Jason
> > >
> > >
> >
> >

 

we have standens in calgary here, so I'll go to them I think. $600 installed
with 1.5"

Jason

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4097F898.2CAA321B@sympatico.ca...
> Nice man.
>
> Welcome to the club.
>
> I am in Canada and went to a shop that does springs for big dump trucks
> and highway tractors. They were all fighting over who would get to do
> the springs in my 'little' truck. The boss laughed and said screw you
> all, I'm doing it! LOL!
>
> They ordered stock springs in with a pre-arched 'keeper' leaf and bent
> the rest to make a 2.5" lift for me. It was less than $250.00 a set if
> I remember right.
>
> I bounce mine hard and they have held up great since 2000.
>
> Canadian Tire also has an amazing number of parts for them including
> kits for the carb for about $20.00
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> jasonp wrote:
> >
> > The springs need to be done, so I'll lift it at the same time, bigger
tires,
> > some exhaust work...from what I understand once you start it just keeps
> > going and going, but I'll start with that and see what happens
> >
> > Jason
> >
> > "serg" <sfonNOSPAM@yahoo.com> wrote in message
> > news:c78qac$vor0$1@ID-208627.news.uni-berlin.de...
> > > looks like u got a good starter-what are the plans for it??
> > >
> > > "jasonp" <hick@up.com> wrote in message
news:%zPlc.269$F04.132@clgrps13...
> > > > I just thought I'd share a picture of my FIRST and current Jeep.
Also,
> > > what
> > > > I think is a screaming deal!
> > > >
> > > > I am very new to Jeeps, but I'm loving it. When I first started
looking
> > I
> > > > came to this and other newsgroups for information and found great
value
> > in
> > > > all of your help.
> > > >
> > > > so...this is my Jeep and What I paid :)
> > > >
> > > > http://www.highriveralberta.com/jas/jeeppic.jpg
> > > >
> > > > I paid $2800CDN ($2050USD) for this badboy
> > > >
> > > > from the previous owner I received receipts for the following work
(all
> > > done
> > > > in the last 18 months)
> > > >
> > > > transmission rebuild
> > > > New clutch
> > > > New tires
> > > > Muffler
> > > > battery
> > > > he rebuilt the carb
> > > > 2 new rims
> > > > paint
> > > > some stainless steele goodies (need door hinges)
> > > > Plugs in dec
> > > > other little bits
> > > >
> > > > When I bought it I spent $300 replacing the fuel pump and Ignition
> > control
> > > > module.
> > > >
> > > > I think I got a decent deal and wanted to share it with you guys.
Thanks
> > > for
> > > > your help.....and continued help, im sure I'll have more newbie
> > questions.
> > > >
> > > > Jason
> > > >
> > > >
> > >
> > >