Re: Pics or Call out of Power Steering bracket assembly w/ MPI
Thanks guys, Another thing I could do is call jeepsrus to see what they to.
Thanks again, bill "serg" <sfon@yahoo.com> wrote in message news:934d0785.0308261456.14af122e@posting.google.c om... > same reason why i haven't sent pix either... > > > "Jeff Strickland" <beerman@yahoo.com> wrote in message news:<vkn69a2s2ma52c@corp.supernews.com>... > > I would jump in here, but I have a vbelt system, and I don't know that the > > brackets are the same or different. > > > > My power steering pump gets a bracket on the front and on the back. I'll > > have to look at it more closely to be sure, but my recollection is that > > there are two brackets that sandwich the body of the pump. I actually think > > that only one of the brackets holds the pump on, the other is itself a > > bracket that held the air pump for the cold air injectors (part of the old > > smog system). > > > > I'll take a second look ant my power steering and describe the brackets. I > > seem to remember having to put in a couple of washers, and I seem to > > remember there was a spacer of about an inch or inch and a half that was > > needed too. > > > > > > > > > > "William Oliveri" <wuji@bigvalley.net> wrote in message > > news:biet1f$8fm3m$1@ID-193866.news.uni-berlin.de... > > > Hey thanks Serg. Yes, I have this guy's page along with another and a > > host > > > of pics downloaded to my pc. I just don't have a good pic of the finished > > > bracket assembly of the power steering pump on a serp belt. I basicly > > have > > > been told just to make it work. > > > > > > No prob. I'll work it out. > > > > > > Thanks for the reply. > > > > > > bill > > > > > > > > > "serg" <none@none.com> wrote in message > > > news:w2C2b.7198$J%4.238@newssvr25.news.prodigy.com ... > > > > bill-don't know if you've seen this site. this guy's pretty cool and > > his > > > > projects page simply rocks! good luck! > > > > > > > > http://www.sierrajeep.com/moparmpi.htm > > > > > > > > "William Oliveri" <wuji@bigvalley.net> wrote in message > > > > news:bibn3v$7fhd4$1@ID-193866.news.uni-berlin.de... > > > > > Hi all, > > > > > I made some pics with my crappy digital camera so here goes: > > > > > > > > > > This one shows the back bracket (attached to the engine with 2 bolts > > at > > the > > > > > bottom). I had to add a couple of washers between the bracket and the > > > > > engine to push it out. Otherwise the bracket hole didn't line up with > > the > > > > > bolt hole on the intake manifold. > > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets1.jpg > > > > > > > > > > I re-evaluated the intake manifold and see that is seated perfectly > > along > > > > > with the exhaust manifold. > > > > > I'm sure it's centered correctly because I left the two center bolt > > holes > > > > > alone when grinding out the others to make it fit. > > > > > > > > > > This is a frontal view where you can see the left side of the diamond > > > > > bracket doesn't line up with the hole at the water pump and the other > > > > > bracket which is attached to the head bolts on top. > > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets3.jpg > > > > > > > > > > > > > > > These are other versions of #1 > > > > > > > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets2.jpg > > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets4.jpg > > > > > http://members.bigvalley.net/wuji/jeep/PSbrackets5.jpg > > > > > > > > > > > > > > > Thanks for any comments, suggestions. > > > > > > > > > > bill > > > > > > > > > > > > > > > "William Oliveri" <wuji@bigvalley.net> wrote in message > > > > > news:bibhrh$7hdl6$1@ID-193866.news.uni-berlin.de... > > > > > > Hi all, > > > > > > > > > > > > I need pics or a call-out of the power steering bracket assembly > > for > > a > > > > > > Serp Belt on a 258. Can any one take a pic or several pics of > > theirs > > at > > > > > > different angles and send it to me? Or point to some on the web. > > Or > > send > > > > > > me or point me to a call-out of that area. > > > > > > > > > > > > Mine doesn't seem to be going together as I "think" it should. > > > > > > > > > > > > thanks, > > > > > > > > > > > > Bill > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > |
All times are GMT -4. The time now is 04:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands