OX Locker
#21
Guest
Posts: n/a
Re: OX Locker
I have the super 35 w/ ox locker and one for the 30 front, I had to rebuild
the rear and they are a pain in the *** when you have to adjust them. I jack
up one wheel and spin it and then switch it to locked and when it the wheel
stops because it is locked then I tighten everything up. Anyone else have a
better way to adjust them better. Its a pain I swear the cable stretches or
something and then I have to readjust it again. anyone....
Dan
"Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
news:10387g7e4rpv142@corp.supernews.com...
> I read somewhere (maybe review) that OX was thinking about putting a
> solonoid at the end of their cable rather than a manual leaver, that would
> rock.
>
> Jeremy
>
>
> "Evan" <ebmvi@aol.comxxx> wrote in message
> news:20040218082815.11447.00002117@mb-m05.aol.com...
> > anyone heard of problems with a soft or week diff cover? Local
installer
> > suggested saving money for an ARB and that week OX diff-cover was his
main
> > reason. Shortly there after I heard rumors of OX in a CH-11 BK.
> >
> > But if there coming back I'll look again.
> >
> > Keep waiting for a good electric to come out or get better.
> >
> > any thoughts?
> >
> > 83 CJ 8, a work in progress
> > http://hometown.aol.com/ebmvi/MyTJindex.html
> > Take out the "XXX" to e-mail me
> >
>
>
the rear and they are a pain in the *** when you have to adjust them. I jack
up one wheel and spin it and then switch it to locked and when it the wheel
stops because it is locked then I tighten everything up. Anyone else have a
better way to adjust them better. Its a pain I swear the cable stretches or
something and then I have to readjust it again. anyone....
Dan
"Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
news:10387g7e4rpv142@corp.supernews.com...
> I read somewhere (maybe review) that OX was thinking about putting a
> solonoid at the end of their cable rather than a manual leaver, that would
> rock.
>
> Jeremy
>
>
> "Evan" <ebmvi@aol.comxxx> wrote in message
> news:20040218082815.11447.00002117@mb-m05.aol.com...
> > anyone heard of problems with a soft or week diff cover? Local
installer
> > suggested saving money for an ARB and that week OX diff-cover was his
main
> > reason. Shortly there after I heard rumors of OX in a CH-11 BK.
> >
> > But if there coming back I'll look again.
> >
> > Keep waiting for a good electric to come out or get better.
> >
> > any thoughts?
> >
> > 83 CJ 8, a work in progress
> > http://hometown.aol.com/ebmvi/MyTJindex.html
> > Take out the "XXX" to e-mail me
> >
>
>
#22
Guest
Posts: n/a
Re: OX Locker
I have the super 35 w/ ox locker and one for the 30 front, I had to rebuild
the rear and they are a pain in the *** when you have to adjust them. I jack
up one wheel and spin it and then switch it to locked and when it the wheel
stops because it is locked then I tighten everything up. Anyone else have a
better way to adjust them better. Its a pain I swear the cable stretches or
something and then I have to readjust it again. anyone....
Dan
"Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
news:10387g7e4rpv142@corp.supernews.com...
> I read somewhere (maybe review) that OX was thinking about putting a
> solonoid at the end of their cable rather than a manual leaver, that would
> rock.
>
> Jeremy
>
>
> "Evan" <ebmvi@aol.comxxx> wrote in message
> news:20040218082815.11447.00002117@mb-m05.aol.com...
> > anyone heard of problems with a soft or week diff cover? Local
installer
> > suggested saving money for an ARB and that week OX diff-cover was his
main
> > reason. Shortly there after I heard rumors of OX in a CH-11 BK.
> >
> > But if there coming back I'll look again.
> >
> > Keep waiting for a good electric to come out or get better.
> >
> > any thoughts?
> >
> > 83 CJ 8, a work in progress
> > http://hometown.aol.com/ebmvi/MyTJindex.html
> > Take out the "XXX" to e-mail me
> >
>
>
the rear and they are a pain in the *** when you have to adjust them. I jack
up one wheel and spin it and then switch it to locked and when it the wheel
stops because it is locked then I tighten everything up. Anyone else have a
better way to adjust them better. Its a pain I swear the cable stretches or
something and then I have to readjust it again. anyone....
Dan
"Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
news:10387g7e4rpv142@corp.supernews.com...
> I read somewhere (maybe review) that OX was thinking about putting a
> solonoid at the end of their cable rather than a manual leaver, that would
> rock.
>
> Jeremy
>
>
> "Evan" <ebmvi@aol.comxxx> wrote in message
> news:20040218082815.11447.00002117@mb-m05.aol.com...
> > anyone heard of problems with a soft or week diff cover? Local
installer
> > suggested saving money for an ARB and that week OX diff-cover was his
main
> > reason. Shortly there after I heard rumors of OX in a CH-11 BK.
> >
> > But if there coming back I'll look again.
> >
> > Keep waiting for a good electric to come out or get better.
> >
> > any thoughts?
> >
> > 83 CJ 8, a work in progress
> > http://hometown.aol.com/ebmvi/MyTJindex.html
> > Take out the "XXX" to e-mail me
> >
>
>
#23
Guest
Posts: n/a
Re: OX Locker
thats one major complaint I always hear
"Dan" <Dan2hear@nc.rr.com> wrote in message
news:DceZb.21199$%d3.2013892@twister.southeast.rr. com...
> I have the super 35 w/ ox locker and one for the 30 front, I had to
rebuild
> the rear and they are a pain in the *** when you have to adjust them. I
jack
> up one wheel and spin it and then switch it to locked and when it the
wheel
> stops because it is locked then I tighten everything up. Anyone else have
a
> better way to adjust them better. Its a pain I swear the cable stretches
or
> something and then I have to readjust it again. anyone....
> Dan
>
> "Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
> news:10387g7e4rpv142@corp.supernews.com...
> > I read somewhere (maybe review) that OX was thinking about putting a
> > solonoid at the end of their cable rather than a manual leaver, that
would
> > rock.
> >
> > Jeremy
> >
> >
> > "Evan" <ebmvi@aol.comxxx> wrote in message
> > news:20040218082815.11447.00002117@mb-m05.aol.com...
> > > anyone heard of problems with a soft or week diff cover? Local
> installer
> > > suggested saving money for an ARB and that week OX diff-cover was his
> main
> > > reason. Shortly there after I heard rumors of OX in a CH-11 BK.
> > >
> > > But if there coming back I'll look again.
> > >
> > > Keep waiting for a good electric to come out or get better.
> > >
> > > any thoughts?
> > >
> > > 83 CJ 8, a work in progress
> > > http://hometown.aol.com/ebmvi/MyTJindex.html
> > > Take out the "XXX" to e-mail me
> > >
> >
> >
>
>
"Dan" <Dan2hear@nc.rr.com> wrote in message
news:DceZb.21199$%d3.2013892@twister.southeast.rr. com...
> I have the super 35 w/ ox locker and one for the 30 front, I had to
rebuild
> the rear and they are a pain in the *** when you have to adjust them. I
jack
> up one wheel and spin it and then switch it to locked and when it the
wheel
> stops because it is locked then I tighten everything up. Anyone else have
a
> better way to adjust them better. Its a pain I swear the cable stretches
or
> something and then I have to readjust it again. anyone....
> Dan
>
> "Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
> news:10387g7e4rpv142@corp.supernews.com...
> > I read somewhere (maybe review) that OX was thinking about putting a
> > solonoid at the end of their cable rather than a manual leaver, that
would
> > rock.
> >
> > Jeremy
> >
> >
> > "Evan" <ebmvi@aol.comxxx> wrote in message
> > news:20040218082815.11447.00002117@mb-m05.aol.com...
> > > anyone heard of problems with a soft or week diff cover? Local
> installer
> > > suggested saving money for an ARB and that week OX diff-cover was his
> main
> > > reason. Shortly there after I heard rumors of OX in a CH-11 BK.
> > >
> > > But if there coming back I'll look again.
> > >
> > > Keep waiting for a good electric to come out or get better.
> > >
> > > any thoughts?
> > >
> > > 83 CJ 8, a work in progress
> > > http://hometown.aol.com/ebmvi/MyTJindex.html
> > > Take out the "XXX" to e-mail me
> > >
> >
> >
>
>
#24
Guest
Posts: n/a
Re: OX Locker
thats one major complaint I always hear
"Dan" <Dan2hear@nc.rr.com> wrote in message
news:DceZb.21199$%d3.2013892@twister.southeast.rr. com...
> I have the super 35 w/ ox locker and one for the 30 front, I had to
rebuild
> the rear and they are a pain in the *** when you have to adjust them. I
jack
> up one wheel and spin it and then switch it to locked and when it the
wheel
> stops because it is locked then I tighten everything up. Anyone else have
a
> better way to adjust them better. Its a pain I swear the cable stretches
or
> something and then I have to readjust it again. anyone....
> Dan
>
> "Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
> news:10387g7e4rpv142@corp.supernews.com...
> > I read somewhere (maybe review) that OX was thinking about putting a
> > solonoid at the end of their cable rather than a manual leaver, that
would
> > rock.
> >
> > Jeremy
> >
> >
> > "Evan" <ebmvi@aol.comxxx> wrote in message
> > news:20040218082815.11447.00002117@mb-m05.aol.com...
> > > anyone heard of problems with a soft or week diff cover? Local
> installer
> > > suggested saving money for an ARB and that week OX diff-cover was his
> main
> > > reason. Shortly there after I heard rumors of OX in a CH-11 BK.
> > >
> > > But if there coming back I'll look again.
> > >
> > > Keep waiting for a good electric to come out or get better.
> > >
> > > any thoughts?
> > >
> > > 83 CJ 8, a work in progress
> > > http://hometown.aol.com/ebmvi/MyTJindex.html
> > > Take out the "XXX" to e-mail me
> > >
> >
> >
>
>
"Dan" <Dan2hear@nc.rr.com> wrote in message
news:DceZb.21199$%d3.2013892@twister.southeast.rr. com...
> I have the super 35 w/ ox locker and one for the 30 front, I had to
rebuild
> the rear and they are a pain in the *** when you have to adjust them. I
jack
> up one wheel and spin it and then switch it to locked and when it the
wheel
> stops because it is locked then I tighten everything up. Anyone else have
a
> better way to adjust them better. Its a pain I swear the cable stretches
or
> something and then I have to readjust it again. anyone....
> Dan
>
> "Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
> news:10387g7e4rpv142@corp.supernews.com...
> > I read somewhere (maybe review) that OX was thinking about putting a
> > solonoid at the end of their cable rather than a manual leaver, that
would
> > rock.
> >
> > Jeremy
> >
> >
> > "Evan" <ebmvi@aol.comxxx> wrote in message
> > news:20040218082815.11447.00002117@mb-m05.aol.com...
> > > anyone heard of problems with a soft or week diff cover? Local
> installer
> > > suggested saving money for an ARB and that week OX diff-cover was his
> main
> > > reason. Shortly there after I heard rumors of OX in a CH-11 BK.
> > >
> > > But if there coming back I'll look again.
> > >
> > > Keep waiting for a good electric to come out or get better.
> > >
> > > any thoughts?
> > >
> > > 83 CJ 8, a work in progress
> > > http://hometown.aol.com/ebmvi/MyTJindex.html
> > > Take out the "XXX" to e-mail me
> > >
> >
> >
>
>
#25
Guest
Posts: n/a
Re: OX Locker
thats one major complaint I always hear
"Dan" <Dan2hear@nc.rr.com> wrote in message
news:DceZb.21199$%d3.2013892@twister.southeast.rr. com...
> I have the super 35 w/ ox locker and one for the 30 front, I had to
rebuild
> the rear and they are a pain in the *** when you have to adjust them. I
jack
> up one wheel and spin it and then switch it to locked and when it the
wheel
> stops because it is locked then I tighten everything up. Anyone else have
a
> better way to adjust them better. Its a pain I swear the cable stretches
or
> something and then I have to readjust it again. anyone....
> Dan
>
> "Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
> news:10387g7e4rpv142@corp.supernews.com...
> > I read somewhere (maybe review) that OX was thinking about putting a
> > solonoid at the end of their cable rather than a manual leaver, that
would
> > rock.
> >
> > Jeremy
> >
> >
> > "Evan" <ebmvi@aol.comxxx> wrote in message
> > news:20040218082815.11447.00002117@mb-m05.aol.com...
> > > anyone heard of problems with a soft or week diff cover? Local
> installer
> > > suggested saving money for an ARB and that week OX diff-cover was his
> main
> > > reason. Shortly there after I heard rumors of OX in a CH-11 BK.
> > >
> > > But if there coming back I'll look again.
> > >
> > > Keep waiting for a good electric to come out or get better.
> > >
> > > any thoughts?
> > >
> > > 83 CJ 8, a work in progress
> > > http://hometown.aol.com/ebmvi/MyTJindex.html
> > > Take out the "XXX" to e-mail me
> > >
> >
> >
>
>
"Dan" <Dan2hear@nc.rr.com> wrote in message
news:DceZb.21199$%d3.2013892@twister.southeast.rr. com...
> I have the super 35 w/ ox locker and one for the 30 front, I had to
rebuild
> the rear and they are a pain in the *** when you have to adjust them. I
jack
> up one wheel and spin it and then switch it to locked and when it the
wheel
> stops because it is locked then I tighten everything up. Anyone else have
a
> better way to adjust them better. Its a pain I swear the cable stretches
or
> something and then I have to readjust it again. anyone....
> Dan
>
> "Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
> news:10387g7e4rpv142@corp.supernews.com...
> > I read somewhere (maybe review) that OX was thinking about putting a
> > solonoid at the end of their cable rather than a manual leaver, that
would
> > rock.
> >
> > Jeremy
> >
> >
> > "Evan" <ebmvi@aol.comxxx> wrote in message
> > news:20040218082815.11447.00002117@mb-m05.aol.com...
> > > anyone heard of problems with a soft or week diff cover? Local
> installer
> > > suggested saving money for an ARB and that week OX diff-cover was his
> main
> > > reason. Shortly there after I heard rumors of OX in a CH-11 BK.
> > >
> > > But if there coming back I'll look again.
> > >
> > > Keep waiting for a good electric to come out or get better.
> > >
> > > any thoughts?
> > >
> > > 83 CJ 8, a work in progress
> > > http://hometown.aol.com/ebmvi/MyTJindex.html
> > > Take out the "XXX" to e-mail me
> > >
> >
> >
>
>
#26
Guest
Posts: n/a
Re: OX Locker
I have had an Ox in my front since the company began, and one in the
rear for about three months now. The front has the original,
non-spring-loaded shifter, and the rear has the new spring-loaded shifter.
I have never had a problem with cable adjustments. Apparently, once it
is properly set, it stays set. However, I can't comment on the
difficulty of the initial cable adjustment, as I did not do my own
installation.
Keith
Dan wrote:
> I have the super 35 w/ ox locker and one for the 30 front, I had to rebuild
> the rear and they are a pain in the *** when you have to adjust them. I jack
> up one wheel and spin it and then switch it to locked and when it the wheel
> stops because it is locked then I tighten everything up. Anyone else have a
> better way to adjust them better. Its a pain I swear the cable stretches or
> something and then I have to readjust it again. anyone....
> Dan
>
> "Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
> news:10387g7e4rpv142@corp.supernews.com...
>
>> I read somewhere (maybe review) that OX was thinking about putting a
>> solonoid at the end of their cable rather than a manual leaver, that would
>> rock.
>>
>> Jeremy
>>
>>
>> "Evan" <ebmvi@aol.comxxx> wrote in message
>> news:20040218082815.11447.00002117@mb-m05.aol.com...
>>
>>> anyone heard of problems with a soft or week diff cover? Local
>>
> installer
>
>>> suggested saving money for an ARB and that week OX diff-cover was his
>>
> main
>
>>> reason. Shortly there after I heard rumors of OX in a CH-11 BK.
>>>
>>> But if there coming back I'll look again.
>>>
>>> Keep waiting for a good electric to come out or get better.
>>>
>>> any thoughts?
>>>
>>> 83 CJ 8, a work in progress
>>> http://hometown.aol.com/ebmvi/MyTJindex.html
>>> Take out the "XXX" to e-mail me
>>>
>>
>>
rear for about three months now. The front has the original,
non-spring-loaded shifter, and the rear has the new spring-loaded shifter.
I have never had a problem with cable adjustments. Apparently, once it
is properly set, it stays set. However, I can't comment on the
difficulty of the initial cable adjustment, as I did not do my own
installation.
Keith
Dan wrote:
> I have the super 35 w/ ox locker and one for the 30 front, I had to rebuild
> the rear and they are a pain in the *** when you have to adjust them. I jack
> up one wheel and spin it and then switch it to locked and when it the wheel
> stops because it is locked then I tighten everything up. Anyone else have a
> better way to adjust them better. Its a pain I swear the cable stretches or
> something and then I have to readjust it again. anyone....
> Dan
>
> "Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
> news:10387g7e4rpv142@corp.supernews.com...
>
>> I read somewhere (maybe review) that OX was thinking about putting a
>> solonoid at the end of their cable rather than a manual leaver, that would
>> rock.
>>
>> Jeremy
>>
>>
>> "Evan" <ebmvi@aol.comxxx> wrote in message
>> news:20040218082815.11447.00002117@mb-m05.aol.com...
>>
>>> anyone heard of problems with a soft or week diff cover? Local
>>
> installer
>
>>> suggested saving money for an ARB and that week OX diff-cover was his
>>
> main
>
>>> reason. Shortly there after I heard rumors of OX in a CH-11 BK.
>>>
>>> But if there coming back I'll look again.
>>>
>>> Keep waiting for a good electric to come out or get better.
>>>
>>> any thoughts?
>>>
>>> 83 CJ 8, a work in progress
>>> http://hometown.aol.com/ebmvi/MyTJindex.html
>>> Take out the "XXX" to e-mail me
>>>
>>
>>
#27
Guest
Posts: n/a
Re: OX Locker
I have had an Ox in my front since the company began, and one in the
rear for about three months now. The front has the original,
non-spring-loaded shifter, and the rear has the new spring-loaded shifter.
I have never had a problem with cable adjustments. Apparently, once it
is properly set, it stays set. However, I can't comment on the
difficulty of the initial cable adjustment, as I did not do my own
installation.
Keith
Dan wrote:
> I have the super 35 w/ ox locker and one for the 30 front, I had to rebuild
> the rear and they are a pain in the *** when you have to adjust them. I jack
> up one wheel and spin it and then switch it to locked and when it the wheel
> stops because it is locked then I tighten everything up. Anyone else have a
> better way to adjust them better. Its a pain I swear the cable stretches or
> something and then I have to readjust it again. anyone....
> Dan
>
> "Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
> news:10387g7e4rpv142@corp.supernews.com...
>
>> I read somewhere (maybe review) that OX was thinking about putting a
>> solonoid at the end of their cable rather than a manual leaver, that would
>> rock.
>>
>> Jeremy
>>
>>
>> "Evan" <ebmvi@aol.comxxx> wrote in message
>> news:20040218082815.11447.00002117@mb-m05.aol.com...
>>
>>> anyone heard of problems with a soft or week diff cover? Local
>>
> installer
>
>>> suggested saving money for an ARB and that week OX diff-cover was his
>>
> main
>
>>> reason. Shortly there after I heard rumors of OX in a CH-11 BK.
>>>
>>> But if there coming back I'll look again.
>>>
>>> Keep waiting for a good electric to come out or get better.
>>>
>>> any thoughts?
>>>
>>> 83 CJ 8, a work in progress
>>> http://hometown.aol.com/ebmvi/MyTJindex.html
>>> Take out the "XXX" to e-mail me
>>>
>>
>>
rear for about three months now. The front has the original,
non-spring-loaded shifter, and the rear has the new spring-loaded shifter.
I have never had a problem with cable adjustments. Apparently, once it
is properly set, it stays set. However, I can't comment on the
difficulty of the initial cable adjustment, as I did not do my own
installation.
Keith
Dan wrote:
> I have the super 35 w/ ox locker and one for the 30 front, I had to rebuild
> the rear and they are a pain in the *** when you have to adjust them. I jack
> up one wheel and spin it and then switch it to locked and when it the wheel
> stops because it is locked then I tighten everything up. Anyone else have a
> better way to adjust them better. Its a pain I swear the cable stretches or
> something and then I have to readjust it again. anyone....
> Dan
>
> "Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
> news:10387g7e4rpv142@corp.supernews.com...
>
>> I read somewhere (maybe review) that OX was thinking about putting a
>> solonoid at the end of their cable rather than a manual leaver, that would
>> rock.
>>
>> Jeremy
>>
>>
>> "Evan" <ebmvi@aol.comxxx> wrote in message
>> news:20040218082815.11447.00002117@mb-m05.aol.com...
>>
>>> anyone heard of problems with a soft or week diff cover? Local
>>
> installer
>
>>> suggested saving money for an ARB and that week OX diff-cover was his
>>
> main
>
>>> reason. Shortly there after I heard rumors of OX in a CH-11 BK.
>>>
>>> But if there coming back I'll look again.
>>>
>>> Keep waiting for a good electric to come out or get better.
>>>
>>> any thoughts?
>>>
>>> 83 CJ 8, a work in progress
>>> http://hometown.aol.com/ebmvi/MyTJindex.html
>>> Take out the "XXX" to e-mail me
>>>
>>
>>
#28
Guest
Posts: n/a
Re: OX Locker
I have had an Ox in my front since the company began, and one in the
rear for about three months now. The front has the original,
non-spring-loaded shifter, and the rear has the new spring-loaded shifter.
I have never had a problem with cable adjustments. Apparently, once it
is properly set, it stays set. However, I can't comment on the
difficulty of the initial cable adjustment, as I did not do my own
installation.
Keith
Dan wrote:
> I have the super 35 w/ ox locker and one for the 30 front, I had to rebuild
> the rear and they are a pain in the *** when you have to adjust them. I jack
> up one wheel and spin it and then switch it to locked and when it the wheel
> stops because it is locked then I tighten everything up. Anyone else have a
> better way to adjust them better. Its a pain I swear the cable stretches or
> something and then I have to readjust it again. anyone....
> Dan
>
> "Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
> news:10387g7e4rpv142@corp.supernews.com...
>
>> I read somewhere (maybe review) that OX was thinking about putting a
>> solonoid at the end of their cable rather than a manual leaver, that would
>> rock.
>>
>> Jeremy
>>
>>
>> "Evan" <ebmvi@aol.comxxx> wrote in message
>> news:20040218082815.11447.00002117@mb-m05.aol.com...
>>
>>> anyone heard of problems with a soft or week diff cover? Local
>>
> installer
>
>>> suggested saving money for an ARB and that week OX diff-cover was his
>>
> main
>
>>> reason. Shortly there after I heard rumors of OX in a CH-11 BK.
>>>
>>> But if there coming back I'll look again.
>>>
>>> Keep waiting for a good electric to come out or get better.
>>>
>>> any thoughts?
>>>
>>> 83 CJ 8, a work in progress
>>> http://hometown.aol.com/ebmvi/MyTJindex.html
>>> Take out the "XXX" to e-mail me
>>>
>>
>>
rear for about three months now. The front has the original,
non-spring-loaded shifter, and the rear has the new spring-loaded shifter.
I have never had a problem with cable adjustments. Apparently, once it
is properly set, it stays set. However, I can't comment on the
difficulty of the initial cable adjustment, as I did not do my own
installation.
Keith
Dan wrote:
> I have the super 35 w/ ox locker and one for the 30 front, I had to rebuild
> the rear and they are a pain in the *** when you have to adjust them. I jack
> up one wheel and spin it and then switch it to locked and when it the wheel
> stops because it is locked then I tighten everything up. Anyone else have a
> better way to adjust them better. Its a pain I swear the cable stretches or
> something and then I have to readjust it again. anyone....
> Dan
>
> "Jeremy Hupe" <SPAMnpd390@yahoo.com> wrote in message
> news:10387g7e4rpv142@corp.supernews.com...
>
>> I read somewhere (maybe review) that OX was thinking about putting a
>> solonoid at the end of their cable rather than a manual leaver, that would
>> rock.
>>
>> Jeremy
>>
>>
>> "Evan" <ebmvi@aol.comxxx> wrote in message
>> news:20040218082815.11447.00002117@mb-m05.aol.com...
>>
>>> anyone heard of problems with a soft or week diff cover? Local
>>
> installer
>
>>> suggested saving money for an ARB and that week OX diff-cover was his
>>
> main
>
>>> reason. Shortly there after I heard rumors of OX in a CH-11 BK.
>>>
>>> But if there coming back I'll look again.
>>>
>>> Keep waiting for a good electric to come out or get better.
>>>
>>> any thoughts?
>>>
>>> 83 CJ 8, a work in progress
>>> http://hometown.aol.com/ebmvi/MyTJindex.html
>>> Take out the "XXX" to e-mail me
>>>
>>
>>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)