Owner:1, U-joints:0
#1
Guest
Posts: n/a
Owner:1, U-joints:0
Well after a helluva lot of banging, I got my ujoints out. Busted a C-clamp
in the process, so you can see how seized these guys were. Got some PB
Blaster and that seemed to help. Was using a cold chisel and a claw hammer
and completely dulled the edge on the chisel lol. Turns out that the cross
from an old ujoint makes an excellent punch to use- much better than the
chisel.
The new ujoints I got are from Autodrive. Any opinions on these versus
Spicer? Haven't put em in yet.
Skip
in the process, so you can see how seized these guys were. Got some PB
Blaster and that seemed to help. Was using a cold chisel and a claw hammer
and completely dulled the edge on the chisel lol. Turns out that the cross
from an old ujoint makes an excellent punch to use- much better than the
chisel.
The new ujoints I got are from Autodrive. Any opinions on these versus
Spicer? Haven't put em in yet.
Skip
Thread
Thread Starter
Forum
Replies
Last Post
Jeep Mailing List
84
01-12-2004 10:17 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)