OT, double dumb
11-20-2004, 10:00 PM
#1
Guest
Posts: n/a
OT, double dumb
http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
Somebody needs a new job.
--
Paul Calman, Hathaway Pines, California
Somebody needs a new job.
--
Paul Calman, Hathaway Pines, California
11-20-2004, 10:37 PM
#2
Guest
Posts: n/a
Re: OT, double dumb
ROTFLMAO!!!! Thats a good one.
On Sat, 20 Nov 2004 19:00:28 -0800, "Paul Calman" <spam@trap.com> wrote:
>>http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
>>Somebody needs a new job.
On Sat, 20 Nov 2004 19:00:28 -0800, "Paul Calman" <spam@trap.com> wrote:
>>http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
>>Somebody needs a new job.
11-20-2004, 10:37 PM
#3
Guest
Posts: n/a
Re: OT, double dumb
ROTFLMAO!!!! Thats a good one.
On Sat, 20 Nov 2004 19:00:28 -0800, "Paul Calman" <spam@trap.com> wrote:
>>http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
>>Somebody needs a new job.
On Sat, 20 Nov 2004 19:00:28 -0800, "Paul Calman" <spam@trap.com> wrote:
>>http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
>>Somebody needs a new job.
11-20-2004, 10:37 PM
#4
Guest
Posts: n/a
Re: OT, double dumb
ROTFLMAO!!!! Thats a good one.
On Sat, 20 Nov 2004 19:00:28 -0800, "Paul Calman" <spam@trap.com> wrote:
>>http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
>>Somebody needs a new job.
On Sat, 20 Nov 2004 19:00:28 -0800, "Paul Calman" <spam@trap.com> wrote:
>>http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
>>Somebody needs a new job.
11-20-2004, 11:22 PM
#5
Guest
Posts: n/a
Re: OT, double dumb
Paul Calman did pass the time by typing:
> http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
> Somebody needs a new job.
Hehe.. That's what they make outriggers for, like on that
second truck.
--
DougW
> http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
> Somebody needs a new job.
Hehe.. That's what they make outriggers for, like on that
second truck.
--
DougW
11-20-2004, 11:22 PM
#6
Guest
Posts: n/a
Re: OT, double dumb
Paul Calman did pass the time by typing:
> http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
> Somebody needs a new job.
Hehe.. That's what they make outriggers for, like on that
second truck.
--
DougW
> http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
> Somebody needs a new job.
Hehe.. That's what they make outriggers for, like on that
second truck.
--
DougW
11-20-2004, 11:22 PM
#7
Guest
Posts: n/a
Re: OT, double dumb
Paul Calman did pass the time by typing:
> http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
> Somebody needs a new job.
Hehe.. That's what they make outriggers for, like on that
second truck.
--
DougW
> http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
> Somebody needs a new job.
Hehe.. That's what they make outriggers for, like on that
second truck.
--
DougW
11-21-2004, 02:57 AM
#8
Guest
Posts: n/a
Re: OT, double dumb
Actually, he had one outrigger out (pic 4) you can see it at the bow of the
orange dinghy and again in pics 9&10.
The trouble is, he only had one out about 24".
What went wrong?
He gets to the dock and realizes he's undersize to extend the boom so he
parks at an angle in order to reach. He doesn't fully extend the outrigger
on the load size and doesn't use the other one at all. ALWAYS use both
outriggers! If he was perpendicular to the load, I'll bet even extended 24"
on BOTH sides he would have saved it. He had too much load on the right
front spring and not enough on the outrigger.
That second truck was overkill for the car... he could have recovered from
the other side of town! At least he had sense enough to use both outriggers
and park perpendicular to the load.
-Brian
"DougW" <post.replies@invalid.address> wrote in message
news:tJUnd.101827$tU4.4775@okepread06...
: Paul Calman did pass the time by typing:
: > http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
: > Somebody needs a new job.
:
: Hehe.. That's what they make outriggers for, like on that
: second truck.
:
: --
: DougW
:
:
orange dinghy and again in pics 9&10.
The trouble is, he only had one out about 24".
What went wrong?
He gets to the dock and realizes he's undersize to extend the boom so he
parks at an angle in order to reach. He doesn't fully extend the outrigger
on the load size and doesn't use the other one at all. ALWAYS use both
outriggers! If he was perpendicular to the load, I'll bet even extended 24"
on BOTH sides he would have saved it. He had too much load on the right
front spring and not enough on the outrigger.
That second truck was overkill for the car... he could have recovered from
the other side of town! At least he had sense enough to use both outriggers
and park perpendicular to the load.
-Brian
"DougW" <post.replies@invalid.address> wrote in message
news:tJUnd.101827$tU4.4775@okepread06...
: Paul Calman did pass the time by typing:
: > http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
: > Somebody needs a new job.
:
: Hehe.. That's what they make outriggers for, like on that
: second truck.
:
: --
: DougW
:
:
11-21-2004, 02:57 AM
#9
Guest
Posts: n/a
Re: OT, double dumb
Actually, he had one outrigger out (pic 4) you can see it at the bow of the
orange dinghy and again in pics 9&10.
The trouble is, he only had one out about 24".
What went wrong?
He gets to the dock and realizes he's undersize to extend the boom so he
parks at an angle in order to reach. He doesn't fully extend the outrigger
on the load size and doesn't use the other one at all. ALWAYS use both
outriggers! If he was perpendicular to the load, I'll bet even extended 24"
on BOTH sides he would have saved it. He had too much load on the right
front spring and not enough on the outrigger.
That second truck was overkill for the car... he could have recovered from
the other side of town! At least he had sense enough to use both outriggers
and park perpendicular to the load.
-Brian
"DougW" <post.replies@invalid.address> wrote in message
news:tJUnd.101827$tU4.4775@okepread06...
: Paul Calman did pass the time by typing:
: > http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
: > Somebody needs a new job.
:
: Hehe.. That's what they make outriggers for, like on that
: second truck.
:
: --
: DougW
:
:
orange dinghy and again in pics 9&10.
The trouble is, he only had one out about 24".
What went wrong?
He gets to the dock and realizes he's undersize to extend the boom so he
parks at an angle in order to reach. He doesn't fully extend the outrigger
on the load size and doesn't use the other one at all. ALWAYS use both
outriggers! If he was perpendicular to the load, I'll bet even extended 24"
on BOTH sides he would have saved it. He had too much load on the right
front spring and not enough on the outrigger.
That second truck was overkill for the car... he could have recovered from
the other side of town! At least he had sense enough to use both outriggers
and park perpendicular to the load.
-Brian
"DougW" <post.replies@invalid.address> wrote in message
news:tJUnd.101827$tU4.4775@okepread06...
: Paul Calman did pass the time by typing:
: > http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
: > Somebody needs a new job.
:
: Hehe.. That's what they make outriggers for, like on that
: second truck.
:
: --
: DougW
:
:
11-21-2004, 02:57 AM
#10
Guest
Posts: n/a
Re: OT, double dumb
Actually, he had one outrigger out (pic 4) you can see it at the bow of the
orange dinghy and again in pics 9&10.
The trouble is, he only had one out about 24".
What went wrong?
He gets to the dock and realizes he's undersize to extend the boom so he
parks at an angle in order to reach. He doesn't fully extend the outrigger
on the load size and doesn't use the other one at all. ALWAYS use both
outriggers! If he was perpendicular to the load, I'll bet even extended 24"
on BOTH sides he would have saved it. He had too much load on the right
front spring and not enough on the outrigger.
That second truck was overkill for the car... he could have recovered from
the other side of town! At least he had sense enough to use both outriggers
and park perpendicular to the load.
-Brian
"DougW" <post.replies@invalid.address> wrote in message
news:tJUnd.101827$tU4.4775@okepread06...
: Paul Calman did pass the time by typing:
: > http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
: > Somebody needs a new job.
:
: Hehe.. That's what they make outriggers for, like on that
: second truck.
:
: --
: DougW
:
:
orange dinghy and again in pics 9&10.
The trouble is, he only had one out about 24".
What went wrong?
He gets to the dock and realizes he's undersize to extend the boom so he
parks at an angle in order to reach. He doesn't fully extend the outrigger
on the load size and doesn't use the other one at all. ALWAYS use both
outriggers! If he was perpendicular to the load, I'll bet even extended 24"
on BOTH sides he would have saved it. He had too much load on the right
front spring and not enough on the outrigger.
That second truck was overkill for the car... he could have recovered from
the other side of town! At least he had sense enough to use both outriggers
and park perpendicular to the load.
-Brian
"DougW" <post.replies@invalid.address> wrote in message
news:tJUnd.101827$tU4.4775@okepread06...
: Paul Calman did pass the time by typing:
: > http://www.clubgti.com/forum/forum_p...TID=47135&PN=1
: > Somebody needs a new job.
:
: Hehe.. That's what they make outriggers for, like on that
: second truck.
:
: --
: DougW
:
:
