Olympic bumper experiences??
Guest
Posts: n/a
Re: Olympic bumper experiences??
I've got the shorter olympic bumpers w/2" receiver hitch (powder
coated models) on front and back of my 99 TJ. I really like them. Had
them about 3 years.
The rear was the first one I put on and at that time, I had a problem
with the drilling instructions accuracy but I understand they fixed
that. I had no problems at all with the front bumper.
coated models) on front and back of my 99 TJ. I really like them. Had
them about 3 years.
The rear was the first one I put on and at that time, I had a problem
with the drilling instructions accuracy but I understand they fixed
that. I had no problems at all with the front bumper.
Guest
Posts: n/a
Re: Olympic bumper experiences??
I've got the shorter olympic bumpers w/2" receiver hitch (powder
coated models) on front and back of my 99 TJ. I really like them. Had
them about 3 years.
The rear was the first one I put on and at that time, I had a problem
with the drilling instructions accuracy but I understand they fixed
that. I had no problems at all with the front bumper.
coated models) on front and back of my 99 TJ. I really like them. Had
them about 3 years.
The rear was the first one I put on and at that time, I had a problem
with the drilling instructions accuracy but I understand they fixed
that. I had no problems at all with the front bumper.
Guest
Posts: n/a
Re: Olympic bumper experiences??
I've got the shorter olympic bumpers w/2" receiver hitch (powder
coated models) on front and back of my 99 TJ. I really like them. Had
them about 3 years.
The rear was the first one I put on and at that time, I had a problem
with the drilling instructions accuracy but I understand they fixed
that. I had no problems at all with the front bumper.
coated models) on front and back of my 99 TJ. I really like them. Had
them about 3 years.
The rear was the first one I put on and at that time, I had a problem
with the drilling instructions accuracy but I understand they fixed
that. I had no problems at all with the front bumper.
Guest
Posts: n/a
Re: Olympic bumper experiences??
On 15 Dec 2003 09:19 PM, GzrGlide posted the following:
> If all goes well with the deal I should have a winch for our TJ in a
> couple of weeks. At the same time I want to replace the front bumper
> with one where the winch fits inside rather than on top of the bumper.
>
> So I found these:
> http://www.4x4products.com/oa013.html
>
> Anyone have any experience with these specific bumpers? How about
> Olympic products/service in general?
I've got one of their rear bumpers on my Jeep, and it seems to do its
job just fine. The powdercoating hasn't held up worth a damn though. I
want to go to a beefier bumper with a swing-out rack, but that isn't a
fault of the olympic bumper.
You should also look into the "rockproof" series of bumper from M.O.R.E.
which holds the winch in much the same way as the olympic bumper. It
doesn't have the receiver underneath the bumper, but it does include two
shackle points as standard. One possible drawback is the fact that it
ships unpainted but that was actually a plus since I planned to weld my
own winch gaurd bar on. It turned out pretty good.
http://www.mountainoffroad.com/
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
> If all goes well with the deal I should have a winch for our TJ in a
> couple of weeks. At the same time I want to replace the front bumper
> with one where the winch fits inside rather than on top of the bumper.
>
> So I found these:
> http://www.4x4products.com/oa013.html
>
> Anyone have any experience with these specific bumpers? How about
> Olympic products/service in general?
I've got one of their rear bumpers on my Jeep, and it seems to do its
job just fine. The powdercoating hasn't held up worth a damn though. I
want to go to a beefier bumper with a swing-out rack, but that isn't a
fault of the olympic bumper.
You should also look into the "rockproof" series of bumper from M.O.R.E.
which holds the winch in much the same way as the olympic bumper. It
doesn't have the receiver underneath the bumper, but it does include two
shackle points as standard. One possible drawback is the fact that it
ships unpainted but that was actually a plus since I planned to weld my
own winch gaurd bar on. It turned out pretty good.
http://www.mountainoffroad.com/
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
Guest
Posts: n/a
Re: Olympic bumper experiences??
On 15 Dec 2003 09:19 PM, GzrGlide posted the following:
> If all goes well with the deal I should have a winch for our TJ in a
> couple of weeks. At the same time I want to replace the front bumper
> with one where the winch fits inside rather than on top of the bumper.
>
> So I found these:
> http://www.4x4products.com/oa013.html
>
> Anyone have any experience with these specific bumpers? How about
> Olympic products/service in general?
I've got one of their rear bumpers on my Jeep, and it seems to do its
job just fine. The powdercoating hasn't held up worth a damn though. I
want to go to a beefier bumper with a swing-out rack, but that isn't a
fault of the olympic bumper.
You should also look into the "rockproof" series of bumper from M.O.R.E.
which holds the winch in much the same way as the olympic bumper. It
doesn't have the receiver underneath the bumper, but it does include two
shackle points as standard. One possible drawback is the fact that it
ships unpainted but that was actually a plus since I planned to weld my
own winch gaurd bar on. It turned out pretty good.
http://www.mountainoffroad.com/
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
> If all goes well with the deal I should have a winch for our TJ in a
> couple of weeks. At the same time I want to replace the front bumper
> with one where the winch fits inside rather than on top of the bumper.
>
> So I found these:
> http://www.4x4products.com/oa013.html
>
> Anyone have any experience with these specific bumpers? How about
> Olympic products/service in general?
I've got one of their rear bumpers on my Jeep, and it seems to do its
job just fine. The powdercoating hasn't held up worth a damn though. I
want to go to a beefier bumper with a swing-out rack, but that isn't a
fault of the olympic bumper.
You should also look into the "rockproof" series of bumper from M.O.R.E.
which holds the winch in much the same way as the olympic bumper. It
doesn't have the receiver underneath the bumper, but it does include two
shackle points as standard. One possible drawback is the fact that it
ships unpainted but that was actually a plus since I planned to weld my
own winch gaurd bar on. It turned out pretty good.
http://www.mountainoffroad.com/
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
Guest
Posts: n/a
Re: Olympic bumper experiences??
On 15 Dec 2003 09:19 PM, GzrGlide posted the following:
> If all goes well with the deal I should have a winch for our TJ in a
> couple of weeks. At the same time I want to replace the front bumper
> with one where the winch fits inside rather than on top of the bumper.
>
> So I found these:
> http://www.4x4products.com/oa013.html
>
> Anyone have any experience with these specific bumpers? How about
> Olympic products/service in general?
I've got one of their rear bumpers on my Jeep, and it seems to do its
job just fine. The powdercoating hasn't held up worth a damn though. I
want to go to a beefier bumper with a swing-out rack, but that isn't a
fault of the olympic bumper.
You should also look into the "rockproof" series of bumper from M.O.R.E.
which holds the winch in much the same way as the olympic bumper. It
doesn't have the receiver underneath the bumper, but it does include two
shackle points as standard. One possible drawback is the fact that it
ships unpainted but that was actually a plus since I planned to weld my
own winch gaurd bar on. It turned out pretty good.
http://www.mountainoffroad.com/
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
> If all goes well with the deal I should have a winch for our TJ in a
> couple of weeks. At the same time I want to replace the front bumper
> with one where the winch fits inside rather than on top of the bumper.
>
> So I found these:
> http://www.4x4products.com/oa013.html
>
> Anyone have any experience with these specific bumpers? How about
> Olympic products/service in general?
I've got one of their rear bumpers on my Jeep, and it seems to do its
job just fine. The powdercoating hasn't held up worth a damn though. I
want to go to a beefier bumper with a swing-out rack, but that isn't a
fault of the olympic bumper.
You should also look into the "rockproof" series of bumper from M.O.R.E.
which holds the winch in much the same way as the olympic bumper. It
doesn't have the receiver underneath the bumper, but it does include two
shackle points as standard. One possible drawback is the fact that it
ships unpainted but that was actually a plus since I planned to weld my
own winch gaurd bar on. It turned out pretty good.
http://www.mountainoffroad.com/
----------------------------------------------------
Del Rawlins- del@_kills_spammers_rawlinsbrothers.org
Remove _kills_spammers_ to reply via email.
Unofficial Bearhawk FAQ website:
http://www.rawlinsbrothers.org/bhfaq/
Guest
Posts: n/a
Re: Olympic bumper experiences??
I too have had the front and rear Olympic rock bumpers with 2" hitch
receiver for several years. Great product, but go with the gloss
paint. The textured black coat does not hold up as well, especially in
Minnesota winters!
Regards,
Guri Sandhu
98TJ
.. "Jerry Bransford" <jerrypb@mecox.net> wrote in message news:<vFxDb.14787$gN.12746@fed1read05>...
> I've had f/r Olympic bumpers with 2" receiver tubes (centered, not welded on
> underneath) on my TJ for probably six years now and I still like 'em. You
> can see pics of them on my webpages. I'm not so sure I like the new model
> in the pic, it's huge... too huge, much like ARB's.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "GzrGlide" <GzrGlide02@yahoo.ca> wrote in message
> news:VyxDb.43$Tb7.117@news1.mts.net...
> > If all goes well with the deal I should have a winch for our TJ in a
> > couple of weeks. At the same time I want to replace the front bumper
> > with one where the winch fits inside rather than on top of the bumper.
> >
> > So I found these:
> > http://www.4x4products.com/oa013.html
> >
> > Anyone have any experience with these specific bumpers? How about
> > Olympic products/service in general?
> >
> > Thanks in advance
> > Mike
> > 98 TJ SE
> >
receiver for several years. Great product, but go with the gloss
paint. The textured black coat does not hold up as well, especially in
Minnesota winters!
Regards,
Guri Sandhu
98TJ
.. "Jerry Bransford" <jerrypb@mecox.net> wrote in message news:<vFxDb.14787$gN.12746@fed1read05>...
> I've had f/r Olympic bumpers with 2" receiver tubes (centered, not welded on
> underneath) on my TJ for probably six years now and I still like 'em. You
> can see pics of them on my webpages. I'm not so sure I like the new model
> in the pic, it's huge... too huge, much like ARB's.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "GzrGlide" <GzrGlide02@yahoo.ca> wrote in message
> news:VyxDb.43$Tb7.117@news1.mts.net...
> > If all goes well with the deal I should have a winch for our TJ in a
> > couple of weeks. At the same time I want to replace the front bumper
> > with one where the winch fits inside rather than on top of the bumper.
> >
> > So I found these:
> > http://www.4x4products.com/oa013.html
> >
> > Anyone have any experience with these specific bumpers? How about
> > Olympic products/service in general?
> >
> > Thanks in advance
> > Mike
> > 98 TJ SE
> >
Guest
Posts: n/a
Re: Olympic bumper experiences??
I too have had the front and rear Olympic rock bumpers with 2" hitch
receiver for several years. Great product, but go with the gloss
paint. The textured black coat does not hold up as well, especially in
Minnesota winters!
Regards,
Guri Sandhu
98TJ
.. "Jerry Bransford" <jerrypb@mecox.net> wrote in message news:<vFxDb.14787$gN.12746@fed1read05>...
> I've had f/r Olympic bumpers with 2" receiver tubes (centered, not welded on
> underneath) on my TJ for probably six years now and I still like 'em. You
> can see pics of them on my webpages. I'm not so sure I like the new model
> in the pic, it's huge... too huge, much like ARB's.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "GzrGlide" <GzrGlide02@yahoo.ca> wrote in message
> news:VyxDb.43$Tb7.117@news1.mts.net...
> > If all goes well with the deal I should have a winch for our TJ in a
> > couple of weeks. At the same time I want to replace the front bumper
> > with one where the winch fits inside rather than on top of the bumper.
> >
> > So I found these:
> > http://www.4x4products.com/oa013.html
> >
> > Anyone have any experience with these specific bumpers? How about
> > Olympic products/service in general?
> >
> > Thanks in advance
> > Mike
> > 98 TJ SE
> >
receiver for several years. Great product, but go with the gloss
paint. The textured black coat does not hold up as well, especially in
Minnesota winters!
Regards,
Guri Sandhu
98TJ
.. "Jerry Bransford" <jerrypb@mecox.net> wrote in message news:<vFxDb.14787$gN.12746@fed1read05>...
> I've had f/r Olympic bumpers with 2" receiver tubes (centered, not welded on
> underneath) on my TJ for probably six years now and I still like 'em. You
> can see pics of them on my webpages. I'm not so sure I like the new model
> in the pic, it's huge... too huge, much like ARB's.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "GzrGlide" <GzrGlide02@yahoo.ca> wrote in message
> news:VyxDb.43$Tb7.117@news1.mts.net...
> > If all goes well with the deal I should have a winch for our TJ in a
> > couple of weeks. At the same time I want to replace the front bumper
> > with one where the winch fits inside rather than on top of the bumper.
> >
> > So I found these:
> > http://www.4x4products.com/oa013.html
> >
> > Anyone have any experience with these specific bumpers? How about
> > Olympic products/service in general?
> >
> > Thanks in advance
> > Mike
> > 98 TJ SE
> >
Guest
Posts: n/a
Re: Olympic bumper experiences??
I too have had the front and rear Olympic rock bumpers with 2" hitch
receiver for several years. Great product, but go with the gloss
paint. The textured black coat does not hold up as well, especially in
Minnesota winters!
Regards,
Guri Sandhu
98TJ
.. "Jerry Bransford" <jerrypb@mecox.net> wrote in message news:<vFxDb.14787$gN.12746@fed1read05>...
> I've had f/r Olympic bumpers with 2" receiver tubes (centered, not welded on
> underneath) on my TJ for probably six years now and I still like 'em. You
> can see pics of them on my webpages. I'm not so sure I like the new model
> in the pic, it's huge... too huge, much like ARB's.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "GzrGlide" <GzrGlide02@yahoo.ca> wrote in message
> news:VyxDb.43$Tb7.117@news1.mts.net...
> > If all goes well with the deal I should have a winch for our TJ in a
> > couple of weeks. At the same time I want to replace the front bumper
> > with one where the winch fits inside rather than on top of the bumper.
> >
> > So I found these:
> > http://www.4x4products.com/oa013.html
> >
> > Anyone have any experience with these specific bumpers? How about
> > Olympic products/service in general?
> >
> > Thanks in advance
> > Mike
> > 98 TJ SE
> >
receiver for several years. Great product, but go with the gloss
paint. The textured black coat does not hold up as well, especially in
Minnesota winters!
Regards,
Guri Sandhu
98TJ
.. "Jerry Bransford" <jerrypb@mecox.net> wrote in message news:<vFxDb.14787$gN.12746@fed1read05>...
> I've had f/r Olympic bumpers with 2" receiver tubes (centered, not welded on
> underneath) on my TJ for probably six years now and I still like 'em. You
> can see pics of them on my webpages. I'm not so sure I like the new model
> in the pic, it's huge... too huge, much like ARB's.
>
> Jerry
> --
> Jerry Bransford
> To email, remove 'me' from my email address
> KC6TAY, PP-ASEL
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
>
> "GzrGlide" <GzrGlide02@yahoo.ca> wrote in message
> news:VyxDb.43$Tb7.117@news1.mts.net...
> > If all goes well with the deal I should have a winch for our TJ in a
> > couple of weeks. At the same time I want to replace the front bumper
> > with one where the winch fits inside rather than on top of the bumper.
> >
> > So I found these:
> > http://www.4x4products.com/oa013.html
> >
> > Anyone have any experience with these specific bumpers? How about
> > Olympic products/service in general?
> >
> > Thanks in advance
> > Mike
> > 98 TJ SE
> >
