Oil Pressure too high ??
11-22-2007, 11:05 AM
#11
Guest
Posts: n/a
Re: Oil Pressure too high ??
James wrote:
> Thanks Bill !!
>
> James
>
>
With the caution that I do not know how much it costs on your particular
Grand, the failure on the pressure sensor is usually internal, where
replacing it is reasonably cheap and quite simple. The sensors on the
Grands are notoriously flaky and unreliable.
> Thanks Bill !!
>
> James
>
>
With the caution that I do not know how much it costs on your particular
Grand, the failure on the pressure sensor is usually internal, where
replacing it is reasonably cheap and quite simple. The sensors on the
Grands are notoriously flaky and unreliable.
11-30-2007, 12:35 AM
#12
Guest
Posts: n/a
Re: Oil Pressure too high ?? / Problem Solved
As most of you advised, it was the oil pressure sending unit that was
defective. With the installation of a new one, the oil pressure readings
are in the normal range for this car/ 40/60 lbs from idle to full speed.
thanks for the help !!
James
defective. With the installation of a new one, the oil pressure readings
are in the normal range for this car/ 40/60 lbs from idle to full speed.
thanks for the help !!
James
11-30-2007, 12:35 AM
#13
Guest
Posts: n/a
Re: Oil Pressure too high ?? / Problem Solved
As most of you advised, it was the oil pressure sending unit that was
defective. With the installation of a new one, the oil pressure readings
are in the normal range for this car/ 40/60 lbs from idle to full speed.
thanks for the help !!
James
defective. With the installation of a new one, the oil pressure readings
are in the normal range for this car/ 40/60 lbs from idle to full speed.
thanks for the help !!
James
11-30-2007, 01:52 PM
#14
Guest
Posts: n/a
Re: Oil Pressure too high ?? / Problem Solved
James wrote:
> As most of you advised, it was the oil pressure sending unit that was
> defective. With the installation of a new one, the oil pressure
> readings are in the normal range for this car/ 40/60 lbs from idle
> to full speed.
>
> thanks for the help !!
Glad to know that was the problem.
Seems in about 99% of the cases (the other
1% being where the engine goes paff) it's
the pressure sender.
--
DougW
> As most of you advised, it was the oil pressure sending unit that was
> defective. With the installation of a new one, the oil pressure
> readings are in the normal range for this car/ 40/60 lbs from idle
> to full speed.
>
> thanks for the help !!
Glad to know that was the problem.
Seems in about 99% of the cases (the other
1% being where the engine goes paff) it's
the pressure sender.
--
DougW
11-30-2007, 01:52 PM
#15
Guest
Posts: n/a
Re: Oil Pressure too high ?? / Problem Solved
James wrote:
> As most of you advised, it was the oil pressure sending unit that was
> defective. With the installation of a new one, the oil pressure
> readings are in the normal range for this car/ 40/60 lbs from idle
> to full speed.
>
> thanks for the help !!
Glad to know that was the problem.
Seems in about 99% of the cases (the other
1% being where the engine goes paff) it's
the pressure sender.
--
DougW
> As most of you advised, it was the oil pressure sending unit that was
> defective. With the installation of a new one, the oil pressure
> readings are in the normal range for this car/ 40/60 lbs from idle
> to full speed.
>
> thanks for the help !!
Glad to know that was the problem.
Seems in about 99% of the cases (the other
1% being where the engine goes paff) it's
the pressure sender.
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
mmiller
Jeep Mailing List
10
12-11-2008 11:40 PM
dwgrulke@mindspring.com
Jeep Mailing List
8
03-01-2006 11:01 PM
Mike Romain
Jeep Mailing List
52
05-12-2004 11:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
