Oil Pan bolts?
01-20-2005, 06:00 PM
#51
Guest
Posts: n/a
Re: Oil Pan bolts?
On Tue, 18 Jan 2005 19:23:17 -0800, Jeff Strickland wrote:
>
> "Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
> news:0l20c2-qcb.ln1@dman13.dyndns.org...
>> On Tue, 18 Jan 2005 09:17:39 -0800, Jeff Strickland wrote:
>>
>> > But, how does one measure a foot pound spec with an inch pound
>> > torque wrench?
>>
>> Convert the units.
>
> The conversion is just a matter of multiplying by 12, right?
>
> I hate to ask stupid questions, but this is so simple that it must be more
> difficult. 12 inch pounds is 1 foot pound, right.
It's better to ask and be safe!
I believe ft-lbs is a cross product (think multiplication). Therefore
we have "feet" * "pounds". The general way to convert an arbitrary
unit to another one (for the same property) is to multiply by the
conversions you know until all the units you don't want cancel out.
feet * pounds inches inches * pounds
------------- * ------ => ---------------
1 feet 1
Then fill in the numbers :
7 feet * pounds 12 inches 84 inches * pounds
--------------- * --------- => ------------------
1 1 feet 1
The calculator on this site agrees with me, so I think both of us got
it right :-).
http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
HTH,
-D
--
Windows, hmmm, does it come with a GUI interface that works or just
pretty blue screens?
www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org
>
> "Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
> news:0l20c2-qcb.ln1@dman13.dyndns.org...
>> On Tue, 18 Jan 2005 09:17:39 -0800, Jeff Strickland wrote:
>>
>> > But, how does one measure a foot pound spec with an inch pound
>> > torque wrench?
>>
>> Convert the units.
>
> The conversion is just a matter of multiplying by 12, right?
>
> I hate to ask stupid questions, but this is so simple that it must be more
> difficult. 12 inch pounds is 1 foot pound, right.
It's better to ask and be safe!
I believe ft-lbs is a cross product (think multiplication). Therefore
we have "feet" * "pounds". The general way to convert an arbitrary
unit to another one (for the same property) is to multiply by the
conversions you know until all the units you don't want cancel out.
feet * pounds inches inches * pounds
------------- * ------ => ---------------
1 feet 1
Then fill in the numbers :
7 feet * pounds 12 inches 84 inches * pounds
--------------- * --------- => ------------------
1 1 feet 1
The calculator on this site agrees with me, so I think both of us got
it right :-).
http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
HTH,
-D
--
Windows, hmmm, does it come with a GUI interface that works or just
pretty blue screens?
www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org
01-20-2005, 06:00 PM
#52
Guest
Posts: n/a
Re: Oil Pan bolts?
On Tue, 18 Jan 2005 19:23:17 -0800, Jeff Strickland wrote:
>
> "Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
> news:0l20c2-qcb.ln1@dman13.dyndns.org...
>> On Tue, 18 Jan 2005 09:17:39 -0800, Jeff Strickland wrote:
>>
>> > But, how does one measure a foot pound spec with an inch pound
>> > torque wrench?
>>
>> Convert the units.
>
> The conversion is just a matter of multiplying by 12, right?
>
> I hate to ask stupid questions, but this is so simple that it must be more
> difficult. 12 inch pounds is 1 foot pound, right.
It's better to ask and be safe!
I believe ft-lbs is a cross product (think multiplication). Therefore
we have "feet" * "pounds". The general way to convert an arbitrary
unit to another one (for the same property) is to multiply by the
conversions you know until all the units you don't want cancel out.
feet * pounds inches inches * pounds
------------- * ------ => ---------------
1 feet 1
Then fill in the numbers :
7 feet * pounds 12 inches 84 inches * pounds
--------------- * --------- => ------------------
1 1 feet 1
The calculator on this site agrees with me, so I think both of us got
it right :-).
http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
HTH,
-D
--
Windows, hmmm, does it come with a GUI interface that works or just
pretty blue screens?
www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org
>
> "Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
> news:0l20c2-qcb.ln1@dman13.dyndns.org...
>> On Tue, 18 Jan 2005 09:17:39 -0800, Jeff Strickland wrote:
>>
>> > But, how does one measure a foot pound spec with an inch pound
>> > torque wrench?
>>
>> Convert the units.
>
> The conversion is just a matter of multiplying by 12, right?
>
> I hate to ask stupid questions, but this is so simple that it must be more
> difficult. 12 inch pounds is 1 foot pound, right.
It's better to ask and be safe!
I believe ft-lbs is a cross product (think multiplication). Therefore
we have "feet" * "pounds". The general way to convert an arbitrary
unit to another one (for the same property) is to multiply by the
conversions you know until all the units you don't want cancel out.
feet * pounds inches inches * pounds
------------- * ------ => ---------------
1 feet 1
Then fill in the numbers :
7 feet * pounds 12 inches 84 inches * pounds
--------------- * --------- => ------------------
1 1 feet 1
The calculator on this site agrees with me, so I think both of us got
it right :-).
http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
HTH,
-D
--
Windows, hmmm, does it come with a GUI interface that works or just
pretty blue screens?
www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org
01-20-2005, 06:53 PM
#53
Guest
Posts: n/a
Re: Oil Pan bolts?
The multiple is twelve, just like the number of inches to a foot.
Or just like we were taught in grade school, and Jeff reminded us of.
Jeez, don't make it so difficult.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Derrick Hudson wrote:
>
> It's better to ask and be safe!
>
> I believe ft-lbs is a cross product (think multiplication). Therefore
> we have "feet" * "pounds". The general way to convert an arbitrary
> unit to another one (for the same property) is to multiply by the
> conversions you know until all the units you don't want cancel out.
>
> feet * pounds inches inches * pounds
> ------------- * ------ => ---------------
> 1 feet 1
>
> Then fill in the numbers :
>
> 7 feet * pounds 12 inches 84 inches * pounds
> --------------- * --------- => ------------------
> 1 1 feet 1
>
> The calculator on this site agrees with me, so I think both of us got
> it right :-).
>
> http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
>
> HTH,
> -D
>
> --
> Windows, hmmm, does it come with a GUI interface that works or just
> pretty blue screens?
>
> www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org
Or just like we were taught in grade school, and Jeff reminded us of.
Jeez, don't make it so difficult.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Derrick Hudson wrote:
>
> It's better to ask and be safe!
>
> I believe ft-lbs is a cross product (think multiplication). Therefore
> we have "feet" * "pounds". The general way to convert an arbitrary
> unit to another one (for the same property) is to multiply by the
> conversions you know until all the units you don't want cancel out.
>
> feet * pounds inches inches * pounds
> ------------- * ------ => ---------------
> 1 feet 1
>
> Then fill in the numbers :
>
> 7 feet * pounds 12 inches 84 inches * pounds
> --------------- * --------- => ------------------
> 1 1 feet 1
>
> The calculator on this site agrees with me, so I think both of us got
> it right :-).
>
> http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
>
> HTH,
> -D
>
> --
> Windows, hmmm, does it come with a GUI interface that works or just
> pretty blue screens?
>
> www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org
01-20-2005, 06:53 PM
#54
Guest
Posts: n/a
Re: Oil Pan bolts?
The multiple is twelve, just like the number of inches to a foot.
Or just like we were taught in grade school, and Jeff reminded us of.
Jeez, don't make it so difficult.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Derrick Hudson wrote:
>
> It's better to ask and be safe!
>
> I believe ft-lbs is a cross product (think multiplication). Therefore
> we have "feet" * "pounds". The general way to convert an arbitrary
> unit to another one (for the same property) is to multiply by the
> conversions you know until all the units you don't want cancel out.
>
> feet * pounds inches inches * pounds
> ------------- * ------ => ---------------
> 1 feet 1
>
> Then fill in the numbers :
>
> 7 feet * pounds 12 inches 84 inches * pounds
> --------------- * --------- => ------------------
> 1 1 feet 1
>
> The calculator on this site agrees with me, so I think both of us got
> it right :-).
>
> http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
>
> HTH,
> -D
>
> --
> Windows, hmmm, does it come with a GUI interface that works or just
> pretty blue screens?
>
> www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org
Or just like we were taught in grade school, and Jeff reminded us of.
Jeez, don't make it so difficult.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Derrick Hudson wrote:
>
> It's better to ask and be safe!
>
> I believe ft-lbs is a cross product (think multiplication). Therefore
> we have "feet" * "pounds". The general way to convert an arbitrary
> unit to another one (for the same property) is to multiply by the
> conversions you know until all the units you don't want cancel out.
>
> feet * pounds inches inches * pounds
> ------------- * ------ => ---------------
> 1 feet 1
>
> Then fill in the numbers :
>
> 7 feet * pounds 12 inches 84 inches * pounds
> --------------- * --------- => ------------------
> 1 1 feet 1
>
> The calculator on this site agrees with me, so I think both of us got
> it right :-).
>
> http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
>
> HTH,
> -D
>
> --
> Windows, hmmm, does it come with a GUI interface that works or just
> pretty blue screens?
>
> www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org
01-20-2005, 06:53 PM
#55
Guest
Posts: n/a
Re: Oil Pan bolts?
The multiple is twelve, just like the number of inches to a foot.
Or just like we were taught in grade school, and Jeff reminded us of.
Jeez, don't make it so difficult.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Derrick Hudson wrote:
>
> It's better to ask and be safe!
>
> I believe ft-lbs is a cross product (think multiplication). Therefore
> we have "feet" * "pounds". The general way to convert an arbitrary
> unit to another one (for the same property) is to multiply by the
> conversions you know until all the units you don't want cancel out.
>
> feet * pounds inches inches * pounds
> ------------- * ------ => ---------------
> 1 feet 1
>
> Then fill in the numbers :
>
> 7 feet * pounds 12 inches 84 inches * pounds
> --------------- * --------- => ------------------
> 1 1 feet 1
>
> The calculator on this site agrees with me, so I think both of us got
> it right :-).
>
> http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
>
> HTH,
> -D
>
> --
> Windows, hmmm, does it come with a GUI interface that works or just
> pretty blue screens?
>
> www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org
Or just like we were taught in grade school, and Jeff reminded us of.
Jeez, don't make it so difficult.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Derrick Hudson wrote:
>
> It's better to ask and be safe!
>
> I believe ft-lbs is a cross product (think multiplication). Therefore
> we have "feet" * "pounds". The general way to convert an arbitrary
> unit to another one (for the same property) is to multiply by the
> conversions you know until all the units you don't want cancel out.
>
> feet * pounds inches inches * pounds
> ------------- * ------ => ---------------
> 1 feet 1
>
> Then fill in the numbers :
>
> 7 feet * pounds 12 inches 84 inches * pounds
> --------------- * --------- => ------------------
> 1 1 feet 1
>
> The calculator on this site agrees with me, so I think both of us got
> it right :-).
>
> http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
>
> HTH,
> -D
>
> --
> Windows, hmmm, does it come with a GUI interface that works or just
> pretty blue screens?
>
> www: http://dman13.dyndns.org/~dman/ jabber: dman@dman13.dyndns.org
01-21-2005, 01:51 PM
#56
Guest
Posts: n/a
Re: Oil Pan bolts?
The obvious answer is to multiply by 12 to convert feet to inches, but I had
this nagging thought in the back of my mind that said 12 inch pounds isn't a
foot pound. I don't know where this thought came from, or why I am carrying
it around, but I needed to get it verified.
"Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
news:pgo5c2-nj.ln1@dman13.dyndns.org...
> On Tue, 18 Jan 2005 19:23:17 -0800, Jeff Strickland wrote:
> >
> > "Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
> > news:0l20c2-qcb.ln1@dman13.dyndns.org...
> >> On Tue, 18 Jan 2005 09:17:39 -0800, Jeff Strickland wrote:
> >>
> >> > But, how does one measure a foot pound spec with an inch pound
> >> > torque wrench?
> >>
> >> Convert the units.
> >
> > The conversion is just a matter of multiplying by 12, right?
> >
> > I hate to ask stupid questions, but this is so simple that it must be
more
> > difficult. 12 inch pounds is 1 foot pound, right.
>
> It's better to ask and be safe!
>
> I believe ft-lbs is a cross product (think multiplication). Therefore
> we have "feet" * "pounds". The general way to convert an arbitrary
> unit to another one (for the same property) is to multiply by the
> conversions you know until all the units you don't want cancel out.
>
> feet * pounds inches inches * pounds
> ------------- * ------ => ---------------
> 1 feet 1
>
> Then fill in the numbers :
>
> 7 feet * pounds 12 inches 84 inches * pounds
> --------------- * --------- => ------------------
> 1 1 feet 1
>
> The calculator on this site agrees with me, so I think both of us got
> it right :-).
>
> http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
>
> HTH,
> -D
>
> --
> Windows, hmmm, does it come with a GUI interface that works or just
> pretty blue screens?
>
> www: http://dman13.dyndns.org/~dman/ jabber:
dman@dman13.dyndns.org
this nagging thought in the back of my mind that said 12 inch pounds isn't a
foot pound. I don't know where this thought came from, or why I am carrying
it around, but I needed to get it verified.
"Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
news:pgo5c2-nj.ln1@dman13.dyndns.org...
> On Tue, 18 Jan 2005 19:23:17 -0800, Jeff Strickland wrote:
> >
> > "Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
> > news:0l20c2-qcb.ln1@dman13.dyndns.org...
> >> On Tue, 18 Jan 2005 09:17:39 -0800, Jeff Strickland wrote:
> >>
> >> > But, how does one measure a foot pound spec with an inch pound
> >> > torque wrench?
> >>
> >> Convert the units.
> >
> > The conversion is just a matter of multiplying by 12, right?
> >
> > I hate to ask stupid questions, but this is so simple that it must be
more
> > difficult. 12 inch pounds is 1 foot pound, right.
>
> It's better to ask and be safe!
>
> I believe ft-lbs is a cross product (think multiplication). Therefore
> we have "feet" * "pounds". The general way to convert an arbitrary
> unit to another one (for the same property) is to multiply by the
> conversions you know until all the units you don't want cancel out.
>
> feet * pounds inches inches * pounds
> ------------- * ------ => ---------------
> 1 feet 1
>
> Then fill in the numbers :
>
> 7 feet * pounds 12 inches 84 inches * pounds
> --------------- * --------- => ------------------
> 1 1 feet 1
>
> The calculator on this site agrees with me, so I think both of us got
> it right :-).
>
> http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
>
> HTH,
> -D
>
> --
> Windows, hmmm, does it come with a GUI interface that works or just
> pretty blue screens?
>
> www: http://dman13.dyndns.org/~dman/ jabber:
dman@dman13.dyndns.org
01-21-2005, 01:51 PM
#57
Guest
Posts: n/a
Re: Oil Pan bolts?
The obvious answer is to multiply by 12 to convert feet to inches, but I had
this nagging thought in the back of my mind that said 12 inch pounds isn't a
foot pound. I don't know where this thought came from, or why I am carrying
it around, but I needed to get it verified.
"Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
news:pgo5c2-nj.ln1@dman13.dyndns.org...
> On Tue, 18 Jan 2005 19:23:17 -0800, Jeff Strickland wrote:
> >
> > "Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
> > news:0l20c2-qcb.ln1@dman13.dyndns.org...
> >> On Tue, 18 Jan 2005 09:17:39 -0800, Jeff Strickland wrote:
> >>
> >> > But, how does one measure a foot pound spec with an inch pound
> >> > torque wrench?
> >>
> >> Convert the units.
> >
> > The conversion is just a matter of multiplying by 12, right?
> >
> > I hate to ask stupid questions, but this is so simple that it must be
more
> > difficult. 12 inch pounds is 1 foot pound, right.
>
> It's better to ask and be safe!
>
> I believe ft-lbs is a cross product (think multiplication). Therefore
> we have "feet" * "pounds". The general way to convert an arbitrary
> unit to another one (for the same property) is to multiply by the
> conversions you know until all the units you don't want cancel out.
>
> feet * pounds inches inches * pounds
> ------------- * ------ => ---------------
> 1 feet 1
>
> Then fill in the numbers :
>
> 7 feet * pounds 12 inches 84 inches * pounds
> --------------- * --------- => ------------------
> 1 1 feet 1
>
> The calculator on this site agrees with me, so I think both of us got
> it right :-).
>
> http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
>
> HTH,
> -D
>
> --
> Windows, hmmm, does it come with a GUI interface that works or just
> pretty blue screens?
>
> www: http://dman13.dyndns.org/~dman/ jabber:
dman@dman13.dyndns.org
this nagging thought in the back of my mind that said 12 inch pounds isn't a
foot pound. I don't know where this thought came from, or why I am carrying
it around, but I needed to get it verified.
"Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
news:pgo5c2-nj.ln1@dman13.dyndns.org...
> On Tue, 18 Jan 2005 19:23:17 -0800, Jeff Strickland wrote:
> >
> > "Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
> > news:0l20c2-qcb.ln1@dman13.dyndns.org...
> >> On Tue, 18 Jan 2005 09:17:39 -0800, Jeff Strickland wrote:
> >>
> >> > But, how does one measure a foot pound spec with an inch pound
> >> > torque wrench?
> >>
> >> Convert the units.
> >
> > The conversion is just a matter of multiplying by 12, right?
> >
> > I hate to ask stupid questions, but this is so simple that it must be
more
> > difficult. 12 inch pounds is 1 foot pound, right.
>
> It's better to ask and be safe!
>
> I believe ft-lbs is a cross product (think multiplication). Therefore
> we have "feet" * "pounds". The general way to convert an arbitrary
> unit to another one (for the same property) is to multiply by the
> conversions you know until all the units you don't want cancel out.
>
> feet * pounds inches inches * pounds
> ------------- * ------ => ---------------
> 1 feet 1
>
> Then fill in the numbers :
>
> 7 feet * pounds 12 inches 84 inches * pounds
> --------------- * --------- => ------------------
> 1 1 feet 1
>
> The calculator on this site agrees with me, so I think both of us got
> it right :-).
>
> http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
>
> HTH,
> -D
>
> --
> Windows, hmmm, does it come with a GUI interface that works or just
> pretty blue screens?
>
> www: http://dman13.dyndns.org/~dman/ jabber:
dman@dman13.dyndns.org
01-21-2005, 01:51 PM
#58
Guest
Posts: n/a
Re: Oil Pan bolts?
The obvious answer is to multiply by 12 to convert feet to inches, but I had
this nagging thought in the back of my mind that said 12 inch pounds isn't a
foot pound. I don't know where this thought came from, or why I am carrying
it around, but I needed to get it verified.
"Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
news:pgo5c2-nj.ln1@dman13.dyndns.org...
> On Tue, 18 Jan 2005 19:23:17 -0800, Jeff Strickland wrote:
> >
> > "Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
> > news:0l20c2-qcb.ln1@dman13.dyndns.org...
> >> On Tue, 18 Jan 2005 09:17:39 -0800, Jeff Strickland wrote:
> >>
> >> > But, how does one measure a foot pound spec with an inch pound
> >> > torque wrench?
> >>
> >> Convert the units.
> >
> > The conversion is just a matter of multiplying by 12, right?
> >
> > I hate to ask stupid questions, but this is so simple that it must be
more
> > difficult. 12 inch pounds is 1 foot pound, right.
>
> It's better to ask and be safe!
>
> I believe ft-lbs is a cross product (think multiplication). Therefore
> we have "feet" * "pounds". The general way to convert an arbitrary
> unit to another one (for the same property) is to multiply by the
> conversions you know until all the units you don't want cancel out.
>
> feet * pounds inches inches * pounds
> ------------- * ------ => ---------------
> 1 feet 1
>
> Then fill in the numbers :
>
> 7 feet * pounds 12 inches 84 inches * pounds
> --------------- * --------- => ------------------
> 1 1 feet 1
>
> The calculator on this site agrees with me, so I think both of us got
> it right :-).
>
> http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
>
> HTH,
> -D
>
> --
> Windows, hmmm, does it come with a GUI interface that works or just
> pretty blue screens?
>
> www: http://dman13.dyndns.org/~dman/ jabber:
dman@dman13.dyndns.org
this nagging thought in the back of my mind that said 12 inch pounds isn't a
foot pound. I don't know where this thought came from, or why I am carrying
it around, but I needed to get it verified.
"Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
news:pgo5c2-nj.ln1@dman13.dyndns.org...
> On Tue, 18 Jan 2005 19:23:17 -0800, Jeff Strickland wrote:
> >
> > "Derrick Hudson" <dman@dman13.dyndns.org> wrote in message
> > news:0l20c2-qcb.ln1@dman13.dyndns.org...
> >> On Tue, 18 Jan 2005 09:17:39 -0800, Jeff Strickland wrote:
> >>
> >> > But, how does one measure a foot pound spec with an inch pound
> >> > torque wrench?
> >>
> >> Convert the units.
> >
> > The conversion is just a matter of multiplying by 12, right?
> >
> > I hate to ask stupid questions, but this is so simple that it must be
more
> > difficult. 12 inch pounds is 1 foot pound, right.
>
> It's better to ask and be safe!
>
> I believe ft-lbs is a cross product (think multiplication). Therefore
> we have "feet" * "pounds". The general way to convert an arbitrary
> unit to another one (for the same property) is to multiply by the
> conversions you know until all the units you don't want cancel out.
>
> feet * pounds inches inches * pounds
> ------------- * ------ => ---------------
> 1 feet 1
>
> Then fill in the numbers :
>
> 7 feet * pounds 12 inches 84 inches * pounds
> --------------- * --------- => ------------------
> 1 1 feet 1
>
> The calculator on this site agrees with me, so I think both of us got
> it right :-).
>
> http://hemsidor.torget.se/users/b/bo...rt/conv2_e.htm
>
> HTH,
> -D
>
> --
> Windows, hmmm, does it come with a GUI interface that works or just
> pretty blue screens?
>
> www: http://dman13.dyndns.org/~dman/ jabber:
dman@dman13.dyndns.org
01-21-2005, 02:04 PM
#59
Guest
Posts: n/a
Re: Oil Pan bolts?
Probably your knowledge of English, where there's exception to
every rule.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> The obvious answer is to multiply by 12 to convert feet to inches, but I had
> this nagging thought in the back of my mind that said 12 inch pounds isn't a
> foot pound. I don't know where this thought came from, or why I am carrying
> it around, but I needed to get it verified.
every rule.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> The obvious answer is to multiply by 12 to convert feet to inches, but I had
> this nagging thought in the back of my mind that said 12 inch pounds isn't a
> foot pound. I don't know where this thought came from, or why I am carrying
> it around, but I needed to get it verified.
01-21-2005, 02:04 PM
#60
Guest
Posts: n/a
Re: Oil Pan bolts?
Probably your knowledge of English, where there's exception to
every rule.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> The obvious answer is to multiply by 12 to convert feet to inches, but I had
> this nagging thought in the back of my mind that said 12 inch pounds isn't a
> foot pound. I don't know where this thought came from, or why I am carrying
> it around, but I needed to get it verified.
every rule.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Jeff Strickland wrote:
>
> The obvious answer is to multiply by 12 to convert feet to inches, but I had
> this nagging thought in the back of my mind that said 12 inch pounds isn't a
> foot pound. I don't know where this thought came from, or why I am carrying
> it around, but I needed to get it verified.
