Oil leak success story
01-30-2006, 06:53 PM
#1
Guest
Posts: n/a
Oil leak success story
I've been battling an oil leak on the front of my 360 for a couple of
weeks. It has been there months, maybe years, but has recently gotten
worse. I couldn't tell exactly where it was coming from, but it was up
front, near the oil pump, and was dripping off the oil pan lip onto the
front axle. The guys at the oil change place told me it was the oil
pump housing. So I took it apart and reassembled it with a new gasket.
No better. Next, I replaced the oil pan gasket. I had done this a
couple of years ago due to a leaking rear main seal, but didn't like
the way it went back together, so I wanted to re-do it anyway. Got it
right this time, but the leak was no better. My thoughts went to the
possibility of the timing cover and I was really dreading taking
everything off the front of the engine to redo that thing. Then a wise
mechanic friend asked if I'd snugged up on the bolts. So that's what I
did and that was the trick. Some of those bolts are mighty hard to get
to. They're well hidden behind things like the harmonic balancer, the
oil pump and the fuel pump. Some I could barely put a finger on, no way
to get a wrench on them. But I got a quarter to a half turn on 4 of
them near the bottom. Leak fixed. I just thought I'd share this in case
anyone else out there with a leaky AMC V-8 might be having the same
problem.
Mark.
weeks. It has been there months, maybe years, but has recently gotten
worse. I couldn't tell exactly where it was coming from, but it was up
front, near the oil pump, and was dripping off the oil pan lip onto the
front axle. The guys at the oil change place told me it was the oil
pump housing. So I took it apart and reassembled it with a new gasket.
No better. Next, I replaced the oil pan gasket. I had done this a
couple of years ago due to a leaking rear main seal, but didn't like
the way it went back together, so I wanted to re-do it anyway. Got it
right this time, but the leak was no better. My thoughts went to the
possibility of the timing cover and I was really dreading taking
everything off the front of the engine to redo that thing. Then a wise
mechanic friend asked if I'd snugged up on the bolts. So that's what I
did and that was the trick. Some of those bolts are mighty hard to get
to. They're well hidden behind things like the harmonic balancer, the
oil pump and the fuel pump. Some I could barely put a finger on, no way
to get a wrench on them. But I got a quarter to a half turn on 4 of
them near the bottom. Leak fixed. I just thought I'd share this in case
anyone else out there with a leaky AMC V-8 might be having the same
problem.
Mark.
02-01-2006, 08:39 PM
#2
Guest
Posts: n/a
Re: Oil leak success story
I have one of these leaks too. Sounds like the same thing. I'll try your
advise and see if I can tighten up some of the bolts.
Fred
85 GW
"TrailMarker" <carrollcaboodle@netzero.com> wrote in message
news:1138665211.271812.25530@g47g2000cwa.googlegro ups.com...
> I've been battling an oil leak on the front of my 360 for a couple of
> weeks. It has been there months, maybe years, but has recently gotten
> worse. I couldn't tell exactly where it was coming from, but it was up
> front, near the oil pump, and was dripping off the oil pan lip onto the
> front axle. The guys at the oil change place told me it was the oil
> pump housing. So I took it apart and reassembled it with a new gasket.
> No better. Next, I replaced the oil pan gasket. I had done this a
> couple of years ago due to a leaking rear main seal, but didn't like
> the way it went back together, so I wanted to re-do it anyway. Got it
> right this time, but the leak was no better. My thoughts went to the
> possibility of the timing cover and I was really dreading taking
> everything off the front of the engine to redo that thing. Then a wise
> mechanic friend asked if I'd snugged up on the bolts. So that's what I
> did and that was the trick. Some of those bolts are mighty hard to get
> to. They're well hidden behind things like the harmonic balancer, the
> oil pump and the fuel pump. Some I could barely put a finger on, no way
> to get a wrench on them. But I got a quarter to a half turn on 4 of
> them near the bottom. Leak fixed. I just thought I'd share this in case
> anyone else out there with a leaky AMC V-8 might be having the same
> problem.
> Mark.
>
advise and see if I can tighten up some of the bolts.
Fred
85 GW
"TrailMarker" <carrollcaboodle@netzero.com> wrote in message
news:1138665211.271812.25530@g47g2000cwa.googlegro ups.com...
> I've been battling an oil leak on the front of my 360 for a couple of
> weeks. It has been there months, maybe years, but has recently gotten
> worse. I couldn't tell exactly where it was coming from, but it was up
> front, near the oil pump, and was dripping off the oil pan lip onto the
> front axle. The guys at the oil change place told me it was the oil
> pump housing. So I took it apart and reassembled it with a new gasket.
> No better. Next, I replaced the oil pan gasket. I had done this a
> couple of years ago due to a leaking rear main seal, but didn't like
> the way it went back together, so I wanted to re-do it anyway. Got it
> right this time, but the leak was no better. My thoughts went to the
> possibility of the timing cover and I was really dreading taking
> everything off the front of the engine to redo that thing. Then a wise
> mechanic friend asked if I'd snugged up on the bolts. So that's what I
> did and that was the trick. Some of those bolts are mighty hard to get
> to. They're well hidden behind things like the harmonic balancer, the
> oil pump and the fuel pump. Some I could barely put a finger on, no way
> to get a wrench on them. But I got a quarter to a half turn on 4 of
> them near the bottom. Leak fixed. I just thought I'd share this in case
> anyone else out there with a leaky AMC V-8 might be having the same
> problem.
> Mark.
>
02-01-2006, 08:39 PM
#3
Guest
Posts: n/a
Re: Oil leak success story
I have one of these leaks too. Sounds like the same thing. I'll try your
advise and see if I can tighten up some of the bolts.
Fred
85 GW
"TrailMarker" <carrollcaboodle@netzero.com> wrote in message
news:1138665211.271812.25530@g47g2000cwa.googlegro ups.com...
> I've been battling an oil leak on the front of my 360 for a couple of
> weeks. It has been there months, maybe years, but has recently gotten
> worse. I couldn't tell exactly where it was coming from, but it was up
> front, near the oil pump, and was dripping off the oil pan lip onto the
> front axle. The guys at the oil change place told me it was the oil
> pump housing. So I took it apart and reassembled it with a new gasket.
> No better. Next, I replaced the oil pan gasket. I had done this a
> couple of years ago due to a leaking rear main seal, but didn't like
> the way it went back together, so I wanted to re-do it anyway. Got it
> right this time, but the leak was no better. My thoughts went to the
> possibility of the timing cover and I was really dreading taking
> everything off the front of the engine to redo that thing. Then a wise
> mechanic friend asked if I'd snugged up on the bolts. So that's what I
> did and that was the trick. Some of those bolts are mighty hard to get
> to. They're well hidden behind things like the harmonic balancer, the
> oil pump and the fuel pump. Some I could barely put a finger on, no way
> to get a wrench on them. But I got a quarter to a half turn on 4 of
> them near the bottom. Leak fixed. I just thought I'd share this in case
> anyone else out there with a leaky AMC V-8 might be having the same
> problem.
> Mark.
>
advise and see if I can tighten up some of the bolts.
Fred
85 GW
"TrailMarker" <carrollcaboodle@netzero.com> wrote in message
news:1138665211.271812.25530@g47g2000cwa.googlegro ups.com...
> I've been battling an oil leak on the front of my 360 for a couple of
> weeks. It has been there months, maybe years, but has recently gotten
> worse. I couldn't tell exactly where it was coming from, but it was up
> front, near the oil pump, and was dripping off the oil pan lip onto the
> front axle. The guys at the oil change place told me it was the oil
> pump housing. So I took it apart and reassembled it with a new gasket.
> No better. Next, I replaced the oil pan gasket. I had done this a
> couple of years ago due to a leaking rear main seal, but didn't like
> the way it went back together, so I wanted to re-do it anyway. Got it
> right this time, but the leak was no better. My thoughts went to the
> possibility of the timing cover and I was really dreading taking
> everything off the front of the engine to redo that thing. Then a wise
> mechanic friend asked if I'd snugged up on the bolts. So that's what I
> did and that was the trick. Some of those bolts are mighty hard to get
> to. They're well hidden behind things like the harmonic balancer, the
> oil pump and the fuel pump. Some I could barely put a finger on, no way
> to get a wrench on them. But I got a quarter to a half turn on 4 of
> them near the bottom. Leak fixed. I just thought I'd share this in case
> anyone else out there with a leaky AMC V-8 might be having the same
> problem.
> Mark.
>
02-01-2006, 08:39 PM
#4
Guest
Posts: n/a
Re: Oil leak success story
I have one of these leaks too. Sounds like the same thing. I'll try your
advise and see if I can tighten up some of the bolts.
Fred
85 GW
"TrailMarker" <carrollcaboodle@netzero.com> wrote in message
news:1138665211.271812.25530@g47g2000cwa.googlegro ups.com...
> I've been battling an oil leak on the front of my 360 for a couple of
> weeks. It has been there months, maybe years, but has recently gotten
> worse. I couldn't tell exactly where it was coming from, but it was up
> front, near the oil pump, and was dripping off the oil pan lip onto the
> front axle. The guys at the oil change place told me it was the oil
> pump housing. So I took it apart and reassembled it with a new gasket.
> No better. Next, I replaced the oil pan gasket. I had done this a
> couple of years ago due to a leaking rear main seal, but didn't like
> the way it went back together, so I wanted to re-do it anyway. Got it
> right this time, but the leak was no better. My thoughts went to the
> possibility of the timing cover and I was really dreading taking
> everything off the front of the engine to redo that thing. Then a wise
> mechanic friend asked if I'd snugged up on the bolts. So that's what I
> did and that was the trick. Some of those bolts are mighty hard to get
> to. They're well hidden behind things like the harmonic balancer, the
> oil pump and the fuel pump. Some I could barely put a finger on, no way
> to get a wrench on them. But I got a quarter to a half turn on 4 of
> them near the bottom. Leak fixed. I just thought I'd share this in case
> anyone else out there with a leaky AMC V-8 might be having the same
> problem.
> Mark.
>
advise and see if I can tighten up some of the bolts.
Fred
85 GW
"TrailMarker" <carrollcaboodle@netzero.com> wrote in message
news:1138665211.271812.25530@g47g2000cwa.googlegro ups.com...
> I've been battling an oil leak on the front of my 360 for a couple of
> weeks. It has been there months, maybe years, but has recently gotten
> worse. I couldn't tell exactly where it was coming from, but it was up
> front, near the oil pump, and was dripping off the oil pan lip onto the
> front axle. The guys at the oil change place told me it was the oil
> pump housing. So I took it apart and reassembled it with a new gasket.
> No better. Next, I replaced the oil pan gasket. I had done this a
> couple of years ago due to a leaking rear main seal, but didn't like
> the way it went back together, so I wanted to re-do it anyway. Got it
> right this time, but the leak was no better. My thoughts went to the
> possibility of the timing cover and I was really dreading taking
> everything off the front of the engine to redo that thing. Then a wise
> mechanic friend asked if I'd snugged up on the bolts. So that's what I
> did and that was the trick. Some of those bolts are mighty hard to get
> to. They're well hidden behind things like the harmonic balancer, the
> oil pump and the fuel pump. Some I could barely put a finger on, no way
> to get a wrench on them. But I got a quarter to a half turn on 4 of
> them near the bottom. Leak fixed. I just thought I'd share this in case
> anyone else out there with a leaky AMC V-8 might be having the same
> problem.
> Mark.
>
Thread
Thread Starter
Forum
Replies
Last Post
Michael Pomeroy
Jeep Mailing List
8
07-05-2004 09:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)