Oil Leak on G.J.L.
11-02-2006, 07:16 PM
#1
Guest
Posts: n/a
Oil Leak on G.J.L.
I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
I now have an oil leak. The oil is coming from a small plug-like
device that is located directly above the oil filter. This thing plugs
into a piece coming out of the engine and has a wire coming out the
other end. Well, the wire end has a rubber plug that comes out when
under pressure (motor running)....causing the oil to pump/drip out all
over the place. I'm guessing it is some kind of oil pressure
sensor????
This should be easy....can someone tell me what that part is called? I
assume it can be replaced by cutting the existing wire and splicing in
the new device...or do I need to somehow remove the wire from the old
part?
Thanks for your help.
I now have an oil leak. The oil is coming from a small plug-like
device that is located directly above the oil filter. This thing plugs
into a piece coming out of the engine and has a wire coming out the
other end. Well, the wire end has a rubber plug that comes out when
under pressure (motor running)....causing the oil to pump/drip out all
over the place. I'm guessing it is some kind of oil pressure
sensor????
This should be easy....can someone tell me what that part is called? I
assume it can be replaced by cutting the existing wire and splicing in
the new device...or do I need to somehow remove the wire from the old
part?
Thanks for your help.
11-02-2006, 07:35 PM
#2
Guest
Posts: n/a
Re: Oil Leak on G.J.L.
blg wrote:
> I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
>
> I now have an oil leak. The oil is coming from a small plug-like
> device that is located directly above the oil filter. This thing
> plugs into a piece coming out of the engine and has a wire coming out
> the other end. Well, the wire end has a rubber plug that comes out
> when under pressure (motor running)....causing the oil to pump/drip
> out all over the place. I'm guessing it is some kind of oil pressure
> sensor????
Bingo!
http://revbeergoggles.com/Fixes/diag...r-oil-pressure
I'm surprised your oil gauge isn't showing zero with that type of leak.
You can get a new one from either napa or the dealer. Just put a bit
of pipe sealant (not teflon tape) on the threads and screw it in.
The connector just pulls off, lift gently on the tab so it clears the
bump, and wiggle.
The one from napa ECH (better line) has pipe dope on it already.
ECHOP6695 Price: $37.49
The cheaper line NCP (Napa Chassis Parts) works but lacks the warranty
and quite frankly it's poorly made.
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
>
> I now have an oil leak. The oil is coming from a small plug-like
> device that is located directly above the oil filter. This thing
> plugs into a piece coming out of the engine and has a wire coming out
> the other end. Well, the wire end has a rubber plug that comes out
> when under pressure (motor running)....causing the oil to pump/drip
> out all over the place. I'm guessing it is some kind of oil pressure
> sensor????
Bingo!
http://revbeergoggles.com/Fixes/diag...r-oil-pressure
I'm surprised your oil gauge isn't showing zero with that type of leak.
You can get a new one from either napa or the dealer. Just put a bit
of pipe sealant (not teflon tape) on the threads and screw it in.
The connector just pulls off, lift gently on the tab so it clears the
bump, and wiggle.
The one from napa ECH (better line) has pipe dope on it already.
ECHOP6695 Price: $37.49
The cheaper line NCP (Napa Chassis Parts) works but lacks the warranty
and quite frankly it's poorly made.
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
11-02-2006, 07:35 PM
#3
Guest
Posts: n/a
Re: Oil Leak on G.J.L.
blg wrote:
> I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
>
> I now have an oil leak. The oil is coming from a small plug-like
> device that is located directly above the oil filter. This thing
> plugs into a piece coming out of the engine and has a wire coming out
> the other end. Well, the wire end has a rubber plug that comes out
> when under pressure (motor running)....causing the oil to pump/drip
> out all over the place. I'm guessing it is some kind of oil pressure
> sensor????
Bingo!
http://revbeergoggles.com/Fixes/diag...r-oil-pressure
I'm surprised your oil gauge isn't showing zero with that type of leak.
You can get a new one from either napa or the dealer. Just put a bit
of pipe sealant (not teflon tape) on the threads and screw it in.
The connector just pulls off, lift gently on the tab so it clears the
bump, and wiggle.
The one from napa ECH (better line) has pipe dope on it already.
ECHOP6695 Price: $37.49
The cheaper line NCP (Napa Chassis Parts) works but lacks the warranty
and quite frankly it's poorly made.
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
>
> I now have an oil leak. The oil is coming from a small plug-like
> device that is located directly above the oil filter. This thing
> plugs into a piece coming out of the engine and has a wire coming out
> the other end. Well, the wire end has a rubber plug that comes out
> when under pressure (motor running)....causing the oil to pump/drip
> out all over the place. I'm guessing it is some kind of oil pressure
> sensor????
Bingo!
http://revbeergoggles.com/Fixes/diag...r-oil-pressure
I'm surprised your oil gauge isn't showing zero with that type of leak.
You can get a new one from either napa or the dealer. Just put a bit
of pipe sealant (not teflon tape) on the threads and screw it in.
The connector just pulls off, lift gently on the tab so it clears the
bump, and wiggle.
The one from napa ECH (better line) has pipe dope on it already.
ECHOP6695 Price: $37.49
The cheaper line NCP (Napa Chassis Parts) works but lacks the warranty
and quite frankly it's poorly made.
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
11-02-2006, 07:35 PM
#4
Guest
Posts: n/a
Re: Oil Leak on G.J.L.
blg wrote:
> I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
>
> I now have an oil leak. The oil is coming from a small plug-like
> device that is located directly above the oil filter. This thing
> plugs into a piece coming out of the engine and has a wire coming out
> the other end. Well, the wire end has a rubber plug that comes out
> when under pressure (motor running)....causing the oil to pump/drip
> out all over the place. I'm guessing it is some kind of oil pressure
> sensor????
Bingo!
http://revbeergoggles.com/Fixes/diag...r-oil-pressure
I'm surprised your oil gauge isn't showing zero with that type of leak.
You can get a new one from either napa or the dealer. Just put a bit
of pipe sealant (not teflon tape) on the threads and screw it in.
The connector just pulls off, lift gently on the tab so it clears the
bump, and wiggle.
The one from napa ECH (better line) has pipe dope on it already.
ECHOP6695 Price: $37.49
The cheaper line NCP (Napa Chassis Parts) works but lacks the warranty
and quite frankly it's poorly made.
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
> I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
>
> I now have an oil leak. The oil is coming from a small plug-like
> device that is located directly above the oil filter. This thing
> plugs into a piece coming out of the engine and has a wire coming out
> the other end. Well, the wire end has a rubber plug that comes out
> when under pressure (motor running)....causing the oil to pump/drip
> out all over the place. I'm guessing it is some kind of oil pressure
> sensor????
Bingo!
http://revbeergoggles.com/Fixes/diag...r-oil-pressure
I'm surprised your oil gauge isn't showing zero with that type of leak.
You can get a new one from either napa or the dealer. Just put a bit
of pipe sealant (not teflon tape) on the threads and screw it in.
The connector just pulls off, lift gently on the tab so it clears the
bump, and wiggle.
The one from napa ECH (better line) has pipe dope on it already.
ECHOP6695 Price: $37.49
The cheaper line NCP (Napa Chassis Parts) works but lacks the warranty
and quite frankly it's poorly made.
--
-- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Banks Header - and BEER, in the fridge!
11-02-2006, 07:41 PM
#5
Guest
Posts: n/a
Re: Oil Leak on G.J.L.
Thanks Doug... The oil pressure is darn near zero...My wife actually
called me when she noticed it was low...then I saw the oil on the
garage floor!.
So, I think I understand better now.... I don't have to replace the
plug end with the wire but rather the part that the wire plugs into!
That makes more sense...I'm learning!!!
DougW wrote:
> blg wrote:
> > I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
> >
> > I now have an oil leak. The oil is coming from a small plug-like
> > device that is located directly above the oil filter. This thing
> > plugs into a piece coming out of the engine and has a wire coming out
> > the other end. Well, the wire end has a rubber plug that comes out
> > when under pressure (motor running)....causing the oil to pump/drip
> > out all over the place. I'm guessing it is some kind of oil pressure
> > sensor????
>
> Bingo!
> http://revbeergoggles.com/Fixes/diag...r-oil-pressure
>
> I'm surprised your oil gauge isn't showing zero with that type of leak.
>
> You can get a new one from either napa or the dealer. Just put a bit
> of pipe sealant (not teflon tape) on the threads and screw it in.
> The connector just pulls off, lift gently on the tab so it clears the
> bump, and wiggle.
>
> The one from napa ECH (better line) has pipe dope on it already.
> ECHOP6695 Price: $37.49
>
> The cheaper line NCP (Napa Chassis Parts) works but lacks the warranty
> and quite frankly it's poorly made.
>
> --
> -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
called me when she noticed it was low...then I saw the oil on the
garage floor!.
So, I think I understand better now.... I don't have to replace the
plug end with the wire but rather the part that the wire plugs into!
That makes more sense...I'm learning!!!
DougW wrote:
> blg wrote:
> > I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
> >
> > I now have an oil leak. The oil is coming from a small plug-like
> > device that is located directly above the oil filter. This thing
> > plugs into a piece coming out of the engine and has a wire coming out
> > the other end. Well, the wire end has a rubber plug that comes out
> > when under pressure (motor running)....causing the oil to pump/drip
> > out all over the place. I'm guessing it is some kind of oil pressure
> > sensor????
>
> Bingo!
> http://revbeergoggles.com/Fixes/diag...r-oil-pressure
>
> I'm surprised your oil gauge isn't showing zero with that type of leak.
>
> You can get a new one from either napa or the dealer. Just put a bit
> of pipe sealant (not teflon tape) on the threads and screw it in.
> The connector just pulls off, lift gently on the tab so it clears the
> bump, and wiggle.
>
> The one from napa ECH (better line) has pipe dope on it already.
> ECHOP6695 Price: $37.49
>
> The cheaper line NCP (Napa Chassis Parts) works but lacks the warranty
> and quite frankly it's poorly made.
>
> --
> -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
11-02-2006, 07:41 PM
#6
Guest
Posts: n/a
Re: Oil Leak on G.J.L.
Thanks Doug... The oil pressure is darn near zero...My wife actually
called me when she noticed it was low...then I saw the oil on the
garage floor!.
So, I think I understand better now.... I don't have to replace the
plug end with the wire but rather the part that the wire plugs into!
That makes more sense...I'm learning!!!
DougW wrote:
> blg wrote:
> > I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
> >
> > I now have an oil leak. The oil is coming from a small plug-like
> > device that is located directly above the oil filter. This thing
> > plugs into a piece coming out of the engine and has a wire coming out
> > the other end. Well, the wire end has a rubber plug that comes out
> > when under pressure (motor running)....causing the oil to pump/drip
> > out all over the place. I'm guessing it is some kind of oil pressure
> > sensor????
>
> Bingo!
> http://revbeergoggles.com/Fixes/diag...r-oil-pressure
>
> I'm surprised your oil gauge isn't showing zero with that type of leak.
>
> You can get a new one from either napa or the dealer. Just put a bit
> of pipe sealant (not teflon tape) on the threads and screw it in.
> The connector just pulls off, lift gently on the tab so it clears the
> bump, and wiggle.
>
> The one from napa ECH (better line) has pipe dope on it already.
> ECHOP6695 Price: $37.49
>
> The cheaper line NCP (Napa Chassis Parts) works but lacks the warranty
> and quite frankly it's poorly made.
>
> --
> -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
called me when she noticed it was low...then I saw the oil on the
garage floor!.
So, I think I understand better now.... I don't have to replace the
plug end with the wire but rather the part that the wire plugs into!
That makes more sense...I'm learning!!!
DougW wrote:
> blg wrote:
> > I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
> >
> > I now have an oil leak. The oil is coming from a small plug-like
> > device that is located directly above the oil filter. This thing
> > plugs into a piece coming out of the engine and has a wire coming out
> > the other end. Well, the wire end has a rubber plug that comes out
> > when under pressure (motor running)....causing the oil to pump/drip
> > out all over the place. I'm guessing it is some kind of oil pressure
> > sensor????
>
> Bingo!
> http://revbeergoggles.com/Fixes/diag...r-oil-pressure
>
> I'm surprised your oil gauge isn't showing zero with that type of leak.
>
> You can get a new one from either napa or the dealer. Just put a bit
> of pipe sealant (not teflon tape) on the threads and screw it in.
> The connector just pulls off, lift gently on the tab so it clears the
> bump, and wiggle.
>
> The one from napa ECH (better line) has pipe dope on it already.
> ECHOP6695 Price: $37.49
>
> The cheaper line NCP (Napa Chassis Parts) works but lacks the warranty
> and quite frankly it's poorly made.
>
> --
> -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
11-02-2006, 07:41 PM
#7
Guest
Posts: n/a
Re: Oil Leak on G.J.L.
Thanks Doug... The oil pressure is darn near zero...My wife actually
called me when she noticed it was low...then I saw the oil on the
garage floor!.
So, I think I understand better now.... I don't have to replace the
plug end with the wire but rather the part that the wire plugs into!
That makes more sense...I'm learning!!!
DougW wrote:
> blg wrote:
> > I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
> >
> > I now have an oil leak. The oil is coming from a small plug-like
> > device that is located directly above the oil filter. This thing
> > plugs into a piece coming out of the engine and has a wire coming out
> > the other end. Well, the wire end has a rubber plug that comes out
> > when under pressure (motor running)....causing the oil to pump/drip
> > out all over the place. I'm guessing it is some kind of oil pressure
> > sensor????
>
> Bingo!
> http://revbeergoggles.com/Fixes/diag...r-oil-pressure
>
> I'm surprised your oil gauge isn't showing zero with that type of leak.
>
> You can get a new one from either napa or the dealer. Just put a bit
> of pipe sealant (not teflon tape) on the threads and screw it in.
> The connector just pulls off, lift gently on the tab so it clears the
> bump, and wiggle.
>
> The one from napa ECH (better line) has pipe dope on it already.
> ECHOP6695 Price: $37.49
>
> The cheaper line NCP (Napa Chassis Parts) works but lacks the warranty
> and quite frankly it's poorly made.
>
> --
> -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
called me when she noticed it was low...then I saw the oil on the
garage floor!.
So, I think I understand better now.... I don't have to replace the
plug end with the wire but rather the part that the wire plugs into!
That makes more sense...I'm learning!!!
DougW wrote:
> blg wrote:
> > I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
> >
> > I now have an oil leak. The oil is coming from a small plug-like
> > device that is located directly above the oil filter. This thing
> > plugs into a piece coming out of the engine and has a wire coming out
> > the other end. Well, the wire end has a rubber plug that comes out
> > when under pressure (motor running)....causing the oil to pump/drip
> > out all over the place. I'm guessing it is some kind of oil pressure
> > sensor????
>
> Bingo!
> http://revbeergoggles.com/Fixes/diag...r-oil-pressure
>
> I'm surprised your oil gauge isn't showing zero with that type of leak.
>
> You can get a new one from either napa or the dealer. Just put a bit
> of pipe sealant (not teflon tape) on the threads and screw it in.
> The connector just pulls off, lift gently on the tab so it clears the
> bump, and wiggle.
>
> The one from napa ECH (better line) has pipe dope on it already.
> ECHOP6695 Price: $37.49
>
> The cheaper line NCP (Napa Chassis Parts) works but lacks the warranty
> and quite frankly it's poorly made.
>
> --
> -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> Banks Header - and BEER, in the fridge!
11-02-2006, 08:01 PM
#8
Guest
Posts: n/a
Re: Oil Leak on G.J.L.
blg wrote:
> Thanks Doug... The oil pressure is darn near zero...My wife actually
> called me when she noticed it was low...then I saw the oil on the
> garage floor!.
> So, I think I understand better now.... I don't have to replace the
> plug end with the wire but rather the part that the wire plugs into!
> That makes more sense...I'm learning!!!
Since you have a 93, you might want to wonder around my site. I've done
a lot of routine stuff (and some not routine) "most" of it is documented.
When you put the new one in, you don't want to overtighen it. The threads
arn't that strong and if you lean on it you can strip them. It's better to
run it in by hand then tighten with a wrench. Run the jeep, and if it's
leaking a bit, give it another tweak.
> DougW wrote:
>> blg wrote:
>>> I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
>>>
>>> I now have an oil leak. The oil is coming from a small plug-like
>>> device that is located directly above the oil filter. This thing
>>> plugs into a piece coming out of the engine and has a wire coming
>>> out the other end. Well, the wire end has a rubber plug that comes
>>> out when under pressure (motor running)....causing the oil to
>>> pump/drip out all over the place. I'm guessing it is some kind of
>>> oil pressure sensor????
>>
>> Bingo!
>> http://revbeergoggles.com/Fixes/diag...r-oil-pressure
>>
>> I'm surprised your oil gauge isn't showing zero with that type of
>> leak.
>>
>> You can get a new one from either napa or the dealer. Just put a bit
>> of pipe sealant (not teflon tape) on the threads and screw it in.
>> The connector just pulls off, lift gently on the tab so it clears the
>> bump, and wiggle.
>>
>> The one from napa ECH (better line) has pipe dope on it already.
>> ECHOP6695 Price: $37.49
>>
>> The cheaper line NCP (Napa Chassis Parts) works but lacks the
>> warranty and quite frankly it's poorly made.
>>
>> --
>> -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
>> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
>> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>> Banks Header - and BEER, in the fridge!
> Thanks Doug... The oil pressure is darn near zero...My wife actually
> called me when she noticed it was low...then I saw the oil on the
> garage floor!.
> So, I think I understand better now.... I don't have to replace the
> plug end with the wire but rather the part that the wire plugs into!
> That makes more sense...I'm learning!!!
Since you have a 93, you might want to wonder around my site. I've done
a lot of routine stuff (and some not routine) "most" of it is documented.
When you put the new one in, you don't want to overtighen it. The threads
arn't that strong and if you lean on it you can strip them. It's better to
run it in by hand then tighten with a wrench. Run the jeep, and if it's
leaking a bit, give it another tweak.
> DougW wrote:
>> blg wrote:
>>> I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
>>>
>>> I now have an oil leak. The oil is coming from a small plug-like
>>> device that is located directly above the oil filter. This thing
>>> plugs into a piece coming out of the engine and has a wire coming
>>> out the other end. Well, the wire end has a rubber plug that comes
>>> out when under pressure (motor running)....causing the oil to
>>> pump/drip out all over the place. I'm guessing it is some kind of
>>> oil pressure sensor????
>>
>> Bingo!
>> http://revbeergoggles.com/Fixes/diag...r-oil-pressure
>>
>> I'm surprised your oil gauge isn't showing zero with that type of
>> leak.
>>
>> You can get a new one from either napa or the dealer. Just put a bit
>> of pipe sealant (not teflon tape) on the threads and screw it in.
>> The connector just pulls off, lift gently on the tab so it clears the
>> bump, and wiggle.
>>
>> The one from napa ECH (better line) has pipe dope on it already.
>> ECHOP6695 Price: $37.49
>>
>> The cheaper line NCP (Napa Chassis Parts) works but lacks the
>> warranty and quite frankly it's poorly made.
>>
>> --
>> -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
>> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
>> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>> Banks Header - and BEER, in the fridge!
11-02-2006, 08:01 PM
#9
Guest
Posts: n/a
Re: Oil Leak on G.J.L.
blg wrote:
> Thanks Doug... The oil pressure is darn near zero...My wife actually
> called me when she noticed it was low...then I saw the oil on the
> garage floor!.
> So, I think I understand better now.... I don't have to replace the
> plug end with the wire but rather the part that the wire plugs into!
> That makes more sense...I'm learning!!!
Since you have a 93, you might want to wonder around my site. I've done
a lot of routine stuff (and some not routine) "most" of it is documented.
When you put the new one in, you don't want to overtighen it. The threads
arn't that strong and if you lean on it you can strip them. It's better to
run it in by hand then tighten with a wrench. Run the jeep, and if it's
leaking a bit, give it another tweak.
> DougW wrote:
>> blg wrote:
>>> I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
>>>
>>> I now have an oil leak. The oil is coming from a small plug-like
>>> device that is located directly above the oil filter. This thing
>>> plugs into a piece coming out of the engine and has a wire coming
>>> out the other end. Well, the wire end has a rubber plug that comes
>>> out when under pressure (motor running)....causing the oil to
>>> pump/drip out all over the place. I'm guessing it is some kind of
>>> oil pressure sensor????
>>
>> Bingo!
>> http://revbeergoggles.com/Fixes/diag...r-oil-pressure
>>
>> I'm surprised your oil gauge isn't showing zero with that type of
>> leak.
>>
>> You can get a new one from either napa or the dealer. Just put a bit
>> of pipe sealant (not teflon tape) on the threads and screw it in.
>> The connector just pulls off, lift gently on the tab so it clears the
>> bump, and wiggle.
>>
>> The one from napa ECH (better line) has pipe dope on it already.
>> ECHOP6695 Price: $37.49
>>
>> The cheaper line NCP (Napa Chassis Parts) works but lacks the
>> warranty and quite frankly it's poorly made.
>>
>> --
>> -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
>> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
>> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>> Banks Header - and BEER, in the fridge!
> Thanks Doug... The oil pressure is darn near zero...My wife actually
> called me when she noticed it was low...then I saw the oil on the
> garage floor!.
> So, I think I understand better now.... I don't have to replace the
> plug end with the wire but rather the part that the wire plugs into!
> That makes more sense...I'm learning!!!
Since you have a 93, you might want to wonder around my site. I've done
a lot of routine stuff (and some not routine) "most" of it is documented.
When you put the new one in, you don't want to overtighen it. The threads
arn't that strong and if you lean on it you can strip them. It's better to
run it in by hand then tighten with a wrench. Run the jeep, and if it's
leaking a bit, give it another tweak.
> DougW wrote:
>> blg wrote:
>>> I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
>>>
>>> I now have an oil leak. The oil is coming from a small plug-like
>>> device that is located directly above the oil filter. This thing
>>> plugs into a piece coming out of the engine and has a wire coming
>>> out the other end. Well, the wire end has a rubber plug that comes
>>> out when under pressure (motor running)....causing the oil to
>>> pump/drip out all over the place. I'm guessing it is some kind of
>>> oil pressure sensor????
>>
>> Bingo!
>> http://revbeergoggles.com/Fixes/diag...r-oil-pressure
>>
>> I'm surprised your oil gauge isn't showing zero with that type of
>> leak.
>>
>> You can get a new one from either napa or the dealer. Just put a bit
>> of pipe sealant (not teflon tape) on the threads and screw it in.
>> The connector just pulls off, lift gently on the tab so it clears the
>> bump, and wiggle.
>>
>> The one from napa ECH (better line) has pipe dope on it already.
>> ECHOP6695 Price: $37.49
>>
>> The cheaper line NCP (Napa Chassis Parts) works but lacks the
>> warranty and quite frankly it's poorly made.
>>
>> --
>> -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
>> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
>> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>> Banks Header - and BEER, in the fridge!
11-02-2006, 08:01 PM
#10
Guest
Posts: n/a
Re: Oil Leak on G.J.L.
blg wrote:
> Thanks Doug... The oil pressure is darn near zero...My wife actually
> called me when she noticed it was low...then I saw the oil on the
> garage floor!.
> So, I think I understand better now.... I don't have to replace the
> plug end with the wire but rather the part that the wire plugs into!
> That makes more sense...I'm learning!!!
Since you have a 93, you might want to wonder around my site. I've done
a lot of routine stuff (and some not routine) "most" of it is documented.
When you put the new one in, you don't want to overtighen it. The threads
arn't that strong and if you lean on it you can strip them. It's better to
run it in by hand then tighten with a wrench. Run the jeep, and if it's
leaking a bit, give it another tweak.
> DougW wrote:
>> blg wrote:
>>> I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
>>>
>>> I now have an oil leak. The oil is coming from a small plug-like
>>> device that is located directly above the oil filter. This thing
>>> plugs into a piece coming out of the engine and has a wire coming
>>> out the other end. Well, the wire end has a rubber plug that comes
>>> out when under pressure (motor running)....causing the oil to
>>> pump/drip out all over the place. I'm guessing it is some kind of
>>> oil pressure sensor????
>>
>> Bingo!
>> http://revbeergoggles.com/Fixes/diag...r-oil-pressure
>>
>> I'm surprised your oil gauge isn't showing zero with that type of
>> leak.
>>
>> You can get a new one from either napa or the dealer. Just put a bit
>> of pipe sealant (not teflon tape) on the threads and screw it in.
>> The connector just pulls off, lift gently on the tab so it clears the
>> bump, and wiggle.
>>
>> The one from napa ECH (better line) has pipe dope on it already.
>> ECHOP6695 Price: $37.49
>>
>> The cheaper line NCP (Napa Chassis Parts) works but lacks the
>> warranty and quite frankly it's poorly made.
>>
>> --
>> -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
>> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
>> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>> Banks Header - and BEER, in the fridge!
> Thanks Doug... The oil pressure is darn near zero...My wife actually
> called me when she noticed it was low...then I saw the oil on the
> garage floor!.
> So, I think I understand better now.... I don't have to replace the
> plug end with the wire but rather the part that the wire plugs into!
> That makes more sense...I'm learning!!!
Since you have a 93, you might want to wonder around my site. I've done
a lot of routine stuff (and some not routine) "most" of it is documented.
When you put the new one in, you don't want to overtighen it. The threads
arn't that strong and if you lean on it you can strip them. It's better to
run it in by hand then tighten with a wrench. Run the jeep, and if it's
leaking a bit, give it another tweak.
> DougW wrote:
>> blg wrote:
>>> I have a 93 Grand Cherokee Laredo, straight six with lots of miles.
>>>
>>> I now have an oil leak. The oil is coming from a small plug-like
>>> device that is located directly above the oil filter. This thing
>>> plugs into a piece coming out of the engine and has a wire coming
>>> out the other end. Well, the wire end has a rubber plug that comes
>>> out when under pressure (motor running)....causing the oil to
>>> pump/drip out all over the place. I'm guessing it is some kind of
>>> oil pressure sensor????
>>
>> Bingo!
>> http://revbeergoggles.com/Fixes/diag...r-oil-pressure
>>
>> I'm surprised your oil gauge isn't showing zero with that type of
>> leak.
>>
>> You can get a new one from either napa or the dealer. Just put a bit
>> of pipe sealant (not teflon tape) on the threads and screw it in.
>> The connector just pulls off, lift gently on the tab so it clears the
>> bump, and wiggle.
>>
>> The one from napa ECH (better line) has pipe dope on it already.
>> ECHOP6695 Price: $37.49
>>
>> The cheaper line NCP (Napa Chassis Parts) works but lacks the
>> warranty and quite frankly it's poorly made.
>>
>> --
>> -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com
>> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
>> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>> Banks Header - and BEER, in the fridge!