oil filter mount
Guest
Posts: n/a
Re: Oil pressure problem fixed
On Tue, 30 Jan 2007 21:47:45 -0500, The Merg wrote:
> I looked at the check engine code, I got a 13 - MAP sensor. Seem like that
> would do it? Or should I replace the MAP sensor, not expecting it to fix
> the current problem?
Before you replace the sensor, pull the tube off the throttle body and run
a stiff wire through the fitting to make sure that isn't plugged and the
tube is clear. Then clean the MAP sensor plug really well - same as the IAC
and TPS connectors.
--
Will Honea <whonea@yahoo.com>
> I looked at the check engine code, I got a 13 - MAP sensor. Seem like that
> would do it? Or should I replace the MAP sensor, not expecting it to fix
> the current problem?
Before you replace the sensor, pull the tube off the throttle body and run
a stiff wire through the fitting to make sure that isn't plugged and the
tube is clear. Then clean the MAP sensor plug really well - same as the IAC
and TPS connectors.
--
Will Honea <whonea@yahoo.com>
Guest
Posts: n/a
Re: Oil pressure problem fixed
On Tue, 30 Jan 2007 21:47:45 -0500, The Merg wrote:
> I looked at the check engine code, I got a 13 - MAP sensor. Seem like that
> would do it? Or should I replace the MAP sensor, not expecting it to fix
> the current problem?
Before you replace the sensor, pull the tube off the throttle body and run
a stiff wire through the fitting to make sure that isn't plugged and the
tube is clear. Then clean the MAP sensor plug really well - same as the IAC
and TPS connectors.
--
Will Honea <whonea@yahoo.com>
> I looked at the check engine code, I got a 13 - MAP sensor. Seem like that
> would do it? Or should I replace the MAP sensor, not expecting it to fix
> the current problem?
Before you replace the sensor, pull the tube off the throttle body and run
a stiff wire through the fitting to make sure that isn't plugged and the
tube is clear. Then clean the MAP sensor plug really well - same as the IAC
and TPS connectors.
--
Will Honea <whonea@yahoo.com>
Guest
Posts: n/a
Re: Oil pressure problem fixed
On Tue, 30 Jan 2007 21:47:45 -0500, The Merg wrote:
> I looked at the check engine code, I got a 13 - MAP sensor. Seem like that
> would do it? Or should I replace the MAP sensor, not expecting it to fix
> the current problem?
Before you replace the sensor, pull the tube off the throttle body and run
a stiff wire through the fitting to make sure that isn't plugged and the
tube is clear. Then clean the MAP sensor plug really well - same as the IAC
and TPS connectors.
--
Will Honea <whonea@yahoo.com>
> I looked at the check engine code, I got a 13 - MAP sensor. Seem like that
> would do it? Or should I replace the MAP sensor, not expecting it to fix
> the current problem?
Before you replace the sensor, pull the tube off the throttle body and run
a stiff wire through the fitting to make sure that isn't plugged and the
tube is clear. Then clean the MAP sensor plug really well - same as the IAC
and TPS connectors.
--
Will Honea <whonea@yahoo.com>
Thread
Thread Starter
Forum
Replies
Last Post
fraserwag
Jeep Mailing List
14
Nov 22, 2007 02:38 AM
Jean-Paul Lanaux
Jeep Mailing List
72
May 8, 2004 09:10 PM
L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III
Jeep Mailing List
2
Sep 15, 2003 05:53 PM
Jerry Bransford
Jeep Mailing List
0
Sep 15, 2003 12:49 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)