OBD II Error message
Guest
Posts: n/a
OBD II Error message
Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
Select-trac
Today I noticed the check engine light was illuminated. I performed the key
on-off-on-off-on-off-on procedure and the odometer presented 2 items. The
first code was "P0456" and then that changed to "done"
Any words of wisdom out there concerning this?
Thanks,
Select-trac
Today I noticed the check engine light was illuminated. I performed the key
on-off-on-off-on-off-on procedure and the odometer presented 2 items. The
first code was "P0456" and then that changed to "done"
Any words of wisdom out there concerning this?
Thanks,
Guest
Posts: n/a
Re: OBD II Error message
Hi Billy Ray,
The kid stealing gas didn't take the time put the cap back on
correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
one cycle of engine running from cold to operating temperature, before
the light go out: http://www.----------.com/faultCode.mpg
God Bless America, ßill O|||||||O
mailto:--------------------
Billy Ray wrote:
>
> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
> Select-trac
>
> Today I noticed the check engine light was illuminated. I performed the key
> on-off-on-off-on-off-on procedure and the odometer presented 2 items. The
> first code was "P0456" and then that changed to "done"
>
> Any words of wisdom out there concerning this?
>
> Thanks,
The kid stealing gas didn't take the time put the cap back on
correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
one cycle of engine running from cold to operating temperature, before
the light go out: http://www.----------.com/faultCode.mpg
God Bless America, ßill O|||||||O
mailto:--------------------
Billy Ray wrote:
>
> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
> Select-trac
>
> Today I noticed the check engine light was illuminated. I performed the key
> on-off-on-off-on-off-on procedure and the odometer presented 2 items. The
> first code was "P0456" and then that changed to "done"
>
> Any words of wisdom out there concerning this?
>
> Thanks,
Guest
Posts: n/a
Re: OBD II Error message
Hi Billy Ray,
The kid stealing gas didn't take the time put the cap back on
correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
one cycle of engine running from cold to operating temperature, before
the light go out: http://www.----------.com/faultCode.mpg
God Bless America, ßill O|||||||O
mailto:--------------------
Billy Ray wrote:
>
> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
> Select-trac
>
> Today I noticed the check engine light was illuminated. I performed the key
> on-off-on-off-on-off-on procedure and the odometer presented 2 items. The
> first code was "P0456" and then that changed to "done"
>
> Any words of wisdom out there concerning this?
>
> Thanks,
The kid stealing gas didn't take the time put the cap back on
correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
one cycle of engine running from cold to operating temperature, before
the light go out: http://www.----------.com/faultCode.mpg
God Bless America, ßill O|||||||O
mailto:--------------------
Billy Ray wrote:
>
> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
> Select-trac
>
> Today I noticed the check engine light was illuminated. I performed the key
> on-off-on-off-on-off-on procedure and the odometer presented 2 items. The
> first code was "P0456" and then that changed to "done"
>
> Any words of wisdom out there concerning this?
>
> Thanks,
Guest
Posts: n/a
Re: OBD II Error message
Hi Billy Ray,
The kid stealing gas didn't take the time put the cap back on
correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
one cycle of engine running from cold to operating temperature, before
the light go out: http://www.----------.com/faultCode.mpg
God Bless America, ßill O|||||||O
mailto:--------------------
Billy Ray wrote:
>
> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
> Select-trac
>
> Today I noticed the check engine light was illuminated. I performed the key
> on-off-on-off-on-off-on procedure and the odometer presented 2 items. The
> first code was "P0456" and then that changed to "done"
>
> Any words of wisdom out there concerning this?
>
> Thanks,
The kid stealing gas didn't take the time put the cap back on
correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
one cycle of engine running from cold to operating temperature, before
the light go out: http://www.----------.com/faultCode.mpg
God Bless America, ßill O|||||||O
mailto:--------------------
Billy Ray wrote:
>
> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
> Select-trac
>
> Today I noticed the check engine light was illuminated. I performed the key
> on-off-on-off-on-off-on procedure and the odometer presented 2 items. The
> first code was "P0456" and then that changed to "done"
>
> Any words of wisdom out there concerning this?
>
> Thanks,
Guest
Posts: n/a
Re: OBD II Error message
Hi Billy Ray,
The kid stealing gas didn't take the time put the cap back on
correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
one cycle of engine running from cold to operating temperature, before
the light go out: http://www.----------.com/faultCode.mpg
God Bless America, ßill O|||||||O
mailto:--------------------
Billy Ray wrote:
>
> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
> Select-trac
>
> Today I noticed the check engine light was illuminated. I performed the key
> on-off-on-off-on-off-on procedure and the odometer presented 2 items. The
> first code was "P0456" and then that changed to "done"
>
> Any words of wisdom out there concerning this?
>
> Thanks,
The kid stealing gas didn't take the time put the cap back on
correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
one cycle of engine running from cold to operating temperature, before
the light go out: http://www.----------.com/faultCode.mpg
God Bless America, ßill O|||||||O
mailto:--------------------
Billy Ray wrote:
>
> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
> Select-trac
>
> Today I noticed the check engine light was illuminated. I performed the key
> on-off-on-off-on-off-on procedure and the odometer presented 2 items. The
> first code was "P0456" and then that changed to "done"
>
> Any words of wisdom out there concerning this?
>
> Thanks,
Guest
Posts: n/a
Re: OBD II Error message
Thanks Bill,
The trip I was taking this afternoon was only a couple miles so the engine
probably did not get to operating temperature. I understand that the P0456
code is very common but what is the significance of the "done"?
-billy ray
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42C216AB.DBE80DC8@***.net...
> Hi Billy Ray,
> The kid stealing gas didn't take the time put the cap back on
> correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
> one cycle of engine running from cold to operating temperature, before
> the light go out: http://www.----------.com/faultCode.mpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Billy Ray wrote:
>>
>> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
>> Select-trac
>>
>> Today I noticed the check engine light was illuminated. I performed the
>> key
>> on-off-on-off-on-off-on procedure and the odometer presented 2 items.
>> The
>> first code was "P0456" and then that changed to "done"
>>
>> Any words of wisdom out there concerning this?
>>
>> Thanks,
The trip I was taking this afternoon was only a couple miles so the engine
probably did not get to operating temperature. I understand that the P0456
code is very common but what is the significance of the "done"?
-billy ray
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42C216AB.DBE80DC8@***.net...
> Hi Billy Ray,
> The kid stealing gas didn't take the time put the cap back on
> correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
> one cycle of engine running from cold to operating temperature, before
> the light go out: http://www.----------.com/faultCode.mpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Billy Ray wrote:
>>
>> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
>> Select-trac
>>
>> Today I noticed the check engine light was illuminated. I performed the
>> key
>> on-off-on-off-on-off-on procedure and the odometer presented 2 items.
>> The
>> first code was "P0456" and then that changed to "done"
>>
>> Any words of wisdom out there concerning this?
>>
>> Thanks,
Guest
Posts: n/a
Re: OBD II Error message
Thanks Bill,
The trip I was taking this afternoon was only a couple miles so the engine
probably did not get to operating temperature. I understand that the P0456
code is very common but what is the significance of the "done"?
-billy ray
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42C216AB.DBE80DC8@***.net...
> Hi Billy Ray,
> The kid stealing gas didn't take the time put the cap back on
> correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
> one cycle of engine running from cold to operating temperature, before
> the light go out: http://www.----------.com/faultCode.mpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Billy Ray wrote:
>>
>> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
>> Select-trac
>>
>> Today I noticed the check engine light was illuminated. I performed the
>> key
>> on-off-on-off-on-off-on procedure and the odometer presented 2 items.
>> The
>> first code was "P0456" and then that changed to "done"
>>
>> Any words of wisdom out there concerning this?
>>
>> Thanks,
The trip I was taking this afternoon was only a couple miles so the engine
probably did not get to operating temperature. I understand that the P0456
code is very common but what is the significance of the "done"?
-billy ray
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42C216AB.DBE80DC8@***.net...
> Hi Billy Ray,
> The kid stealing gas didn't take the time put the cap back on
> correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
> one cycle of engine running from cold to operating temperature, before
> the light go out: http://www.----------.com/faultCode.mpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Billy Ray wrote:
>>
>> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
>> Select-trac
>>
>> Today I noticed the check engine light was illuminated. I performed the
>> key
>> on-off-on-off-on-off-on procedure and the odometer presented 2 items.
>> The
>> first code was "P0456" and then that changed to "done"
>>
>> Any words of wisdom out there concerning this?
>>
>> Thanks,
Guest
Posts: n/a
Re: OBD II Error message
Thanks Bill,
The trip I was taking this afternoon was only a couple miles so the engine
probably did not get to operating temperature. I understand that the P0456
code is very common but what is the significance of the "done"?
-billy ray
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42C216AB.DBE80DC8@***.net...
> Hi Billy Ray,
> The kid stealing gas didn't take the time put the cap back on
> correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
> one cycle of engine running from cold to operating temperature, before
> the light go out: http://www.----------.com/faultCode.mpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Billy Ray wrote:
>>
>> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
>> Select-trac
>>
>> Today I noticed the check engine light was illuminated. I performed the
>> key
>> on-off-on-off-on-off-on procedure and the odometer presented 2 items.
>> The
>> first code was "P0456" and then that changed to "done"
>>
>> Any words of wisdom out there concerning this?
>>
>> Thanks,
The trip I was taking this afternoon was only a couple miles so the engine
probably did not get to operating temperature. I understand that the P0456
code is very common but what is the significance of the "done"?
-billy ray
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42C216AB.DBE80DC8@***.net...
> Hi Billy Ray,
> The kid stealing gas didn't take the time put the cap back on
> correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
> one cycle of engine running from cold to operating temperature, before
> the light go out: http://www.----------.com/faultCode.mpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Billy Ray wrote:
>>
>> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
>> Select-trac
>>
>> Today I noticed the check engine light was illuminated. I performed the
>> key
>> on-off-on-off-on-off-on procedure and the odometer presented 2 items.
>> The
>> first code was "P0456" and then that changed to "done"
>>
>> Any words of wisdom out there concerning this?
>>
>> Thanks,
Guest
Posts: n/a
Re: OBD II Error message
Thanks Bill,
The trip I was taking this afternoon was only a couple miles so the engine
probably did not get to operating temperature. I understand that the P0456
code is very common but what is the significance of the "done"?
-billy ray
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42C216AB.DBE80DC8@***.net...
> Hi Billy Ray,
> The kid stealing gas didn't take the time put the cap back on
> correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
> one cycle of engine running from cold to operating temperature, before
> the light go out: http://www.----------.com/faultCode.mpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Billy Ray wrote:
>>
>> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
>> Select-trac
>>
>> Today I noticed the check engine light was illuminated. I performed the
>> key
>> on-off-on-off-on-off-on procedure and the odometer presented 2 items.
>> The
>> first code was "P0456" and then that changed to "done"
>>
>> Any words of wisdom out there concerning this?
>>
>> Thanks,
The trip I was taking this afternoon was only a couple miles so the engine
probably did not get to operating temperature. I understand that the P0456
code is very common but what is the significance of the "done"?
-billy ray
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:42C216AB.DBE80DC8@***.net...
> Hi Billy Ray,
> The kid stealing gas didn't take the time put the cap back on
> correctly: http://www.wjjeeps.com/faultcodes.htm It must complete the
> one cycle of engine running from cold to operating temperature, before
> the light go out: http://www.----------.com/faultCode.mpg
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Billy Ray wrote:
>>
>> Vehicle is a 2002 WJ (Grand Cherokee Laredo) 4 liter automatic with
>> Select-trac
>>
>> Today I noticed the check engine light was illuminated. I performed the
>> key
>> on-off-on-off-on-off-on procedure and the odometer presented 2 items.
>> The
>> first code was "P0456" and then that changed to "done"
>>
>> Any words of wisdom out there concerning this?
>>
>> Thanks,
Guest
Posts: n/a
Re: OBD II Error message
Hi Bill,
I beleive the done is needed like the five, five flashes of the
light before, because it sometimes take a while to run the full
diagnosis, and many times people give and saying their on and off
sequence doesn't work, unless we tell them to wait for the end of test.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> Thanks Bill,
> The trip I was taking this afternoon was only a couple miles so the engine
> probably did not get to operating temperature. I understand that the P0456
> code is very common but what is the significance of the "done"?
>
> -billy ray
I beleive the done is needed like the five, five flashes of the
light before, because it sometimes take a while to run the full
diagnosis, and many times people give and saying their on and off
sequence doesn't work, unless we tell them to wait for the end of test.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Billy Ray wrote:
>
> Thanks Bill,
> The trip I was taking this afternoon was only a couple miles so the engine
> probably did not get to operating temperature. I understand that the P0456
> code is very common but what is the significance of the "done"?
>
> -billy ray