Lon

Thanks, that is the main one for the PCM stuff, but there are other
identical connectors in a coupla other locations on the 95 ZJ called out
for their appropriate subsystems in the FSM

Gotta get a round tuit and get me another flatbed scanner for posting
pictures.


billy ray proclaimed:

> Is this what you are looking for?
>
> http://i112.photobucket.com/albums/n...ZJDataLink.jpg
>
>
>
>
> "L.W.(Bill) ------ III" <----------@***.net> wrote in message
> news:4556CA09.9C38D98@***.net...
>
>> I believe the connection is made at the fuse block, if it like WJ
>>Grand Cherokees. You may check by: 1. Turn the ignition key ON THREE
>>TIMES in succession: ON : OFF : ON : OFF : ON (within FIVE seconds)
>>2. Count the number of times the check engine lamp on the dash flashes.
>>The number of flashes represents the error code. There will be a short
>>pause between the flashes representing the different digits of the code.
>>Longer pauses separate individual trouble codes.
>>3. Code 55 will be the last code to be displayed.
>>4. These codes will also be displayed on a digital odometer, where they
>>are much easier to read!
>>http://minimopar.knizefamily.net/fault/#51-55
>>http://www.wjjeeps.com/faultcodes.htm
>> God Bless America, Bill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>neonhighlite wrote:
>>
>>>i have a 95' grande cherokee LTD 5.2 and im a mechanic but im coming here
>>>to see if any one knows where the DCL (OBD connector) is?. i bought it
>>>used it may have been "altered" im not sure but just write back...thanks
>>>alot guys
>
>
>

Lon

Thanks, that is the main one for the PCM stuff, but there are other
identical connectors in a coupla other locations on the 95 ZJ called out
for their appropriate subsystems in the FSM

Gotta get a round tuit and get me another flatbed scanner for posting
pictures.


billy ray proclaimed:

> Is this what you are looking for?
>
> http://i112.photobucket.com/albums/n...ZJDataLink.jpg
>
>
>
>
> "L.W.(Bill) ------ III" <----------@***.net> wrote in message
> news:4556CA09.9C38D98@***.net...
>
>> I believe the connection is made at the fuse block, if it like WJ
>>Grand Cherokees. You may check by: 1. Turn the ignition key ON THREE
>>TIMES in succession: ON : OFF : ON : OFF : ON (within FIVE seconds)
>>2. Count the number of times the check engine lamp on the dash flashes.
>>The number of flashes represents the error code. There will be a short
>>pause between the flashes representing the different digits of the code.
>>Longer pauses separate individual trouble codes.
>>3. Code 55 will be the last code to be displayed.
>>4. These codes will also be displayed on a digital odometer, where they
>>are much easier to read!
>>http://minimopar.knizefamily.net/fault/#51-55
>>http://www.wjjeeps.com/faultcodes.htm
>> God Bless America, Bill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>neonhighlite wrote:
>>
>>>i have a 95' grande cherokee LTD 5.2 and im a mechanic but im coming here
>>>to see if any one knows where the DCL (OBD connector) is?. i bought it
>>>used it may have been "altered" im not sure but just write back...thanks
>>>alot guys
>
>
>

Lon

Thanks, that is the main one for the PCM stuff, but there are other
identical connectors in a coupla other locations on the 95 ZJ called out
for their appropriate subsystems in the FSM

Gotta get a round tuit and get me another flatbed scanner for posting
pictures.


billy ray proclaimed:

> Is this what you are looking for?
>
> http://i112.photobucket.com/albums/n...ZJDataLink.jpg
>
>
>
>
> "L.W.(Bill) ------ III" <----------@***.net> wrote in message
> news:4556CA09.9C38D98@***.net...
>
>> I believe the connection is made at the fuse block, if it like WJ
>>Grand Cherokees. You may check by: 1. Turn the ignition key ON THREE
>>TIMES in succession: ON : OFF : ON : OFF : ON (within FIVE seconds)
>>2. Count the number of times the check engine lamp on the dash flashes.
>>The number of flashes represents the error code. There will be a short
>>pause between the flashes representing the different digits of the code.
>>Longer pauses separate individual trouble codes.
>>3. Code 55 will be the last code to be displayed.
>>4. These codes will also be displayed on a digital odometer, where they
>>are much easier to read!
>>http://minimopar.knizefamily.net/fault/#51-55
>>http://www.wjjeeps.com/faultcodes.htm
>> God Bless America, Bill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>neonhighlite wrote:
>>
>>>i have a 95' grande cherokee LTD 5.2 and im a mechanic but im coming here
>>>to see if any one knows where the DCL (OBD connector) is?. i bought it
>>>used it may have been "altered" im not sure but just write back...thanks
>>>alot guys
>
>
>

Jeff Strickland

The OBD II specification says the data port must be located along the bottom
edge of the dash board. It is generally in the area above your left leg
while youa re driving. Usually it is exposed and you do not have to hunt for
it, this is part of the specification -- the port has to be easy to
locate -- but some automakers -- Jeep isn't among them as far as I know --
that put the data port behind a cover but when they do this they are
required to clearly annotate the cover as containing the data port, and
nothing else can be behaind the cover with the data port.

One thing that you might find is that your '95 is OBD I, not OBD II. Some
'95 cars and trucks are OBD II, but the OBD II specification was not
required until '96 model production.

As an OBD I compliant vehicle, you can buy a Chrysler scan tool for about
$30.







"neonhighlite" <neonhighlite@yahoo.com> wrote in message
news:bc58802b707bd070681c73711e62c0ff@localhost.ta lkaboutautos.com...
>i have a 95' grande cherokee LTD 5.2 and im a mechanic but im coming here
> to see if any one knows where the DCL (OBD connector) is?. i bought it
> used it may have been "altered" im not sure but just write back...thanks
> alot guys
>

Jeff Strickland

The OBD II specification says the data port must be located along the bottom
edge of the dash board. It is generally in the area above your left leg
while youa re driving. Usually it is exposed and you do not have to hunt for
it, this is part of the specification -- the port has to be easy to
locate -- but some automakers -- Jeep isn't among them as far as I know --
that put the data port behind a cover but when they do this they are
required to clearly annotate the cover as containing the data port, and
nothing else can be behaind the cover with the data port.

One thing that you might find is that your '95 is OBD I, not OBD II. Some
'95 cars and trucks are OBD II, but the OBD II specification was not
required until '96 model production.

As an OBD I compliant vehicle, you can buy a Chrysler scan tool for about
$30.







"neonhighlite" <neonhighlite@yahoo.com> wrote in message
news:bc58802b707bd070681c73711e62c0ff@localhost.ta lkaboutautos.com...
>i have a 95' grande cherokee LTD 5.2 and im a mechanic but im coming here
> to see if any one knows where the DCL (OBD connector) is?. i bought it
> used it may have been "altered" im not sure but just write back...thanks
> alot guys
>

Jeff Strickland

The OBD II specification says the data port must be located along the bottom
edge of the dash board. It is generally in the area above your left leg
while youa re driving. Usually it is exposed and you do not have to hunt for
it, this is part of the specification -- the port has to be easy to
locate -- but some automakers -- Jeep isn't among them as far as I know --
that put the data port behind a cover but when they do this they are
required to clearly annotate the cover as containing the data port, and
nothing else can be behaind the cover with the data port.

One thing that you might find is that your '95 is OBD I, not OBD II. Some
'95 cars and trucks are OBD II, but the OBD II specification was not
required until '96 model production.

As an OBD I compliant vehicle, you can buy a Chrysler scan tool for about
$30.







"neonhighlite" <neonhighlite@yahoo.com> wrote in message
news:bc58802b707bd070681c73711e62c0ff@localhost.ta lkaboutautos.com...
>i have a 95' grande cherokee LTD 5.2 and im a mechanic but im coming here
> to see if any one knows where the DCL (OBD connector) is?. i bought it
> used it may have been "altered" im not sure but just write back...thanks
> alot guys
>

Lon

'95s are definitely obd 1 and have a couple connectors. For the engine
stuff it is pretty obvious near the engine controller. Another one
inside by the console up post for the gewgaws.


Jeff Strickland proclaimed:

> The OBD II specification says the data port must be located along the
> bottom edge of the dash board. It is generally in the area above your
> left leg while youa re driving. Usually it is exposed and you do not
> have to hunt for it, this is part of the specification -- the port has
> to be easy to locate -- but some automakers -- Jeep isn't among them as
> far as I know -- that put the data port behind a cover but when they do
> this they are required to clearly annotate the cover as containing the
> data port, and nothing else can be behaind the cover with the data port.
>
> One thing that you might find is that your '95 is OBD I, not OBD II.
> Some '95 cars and trucks are OBD II, but the OBD II specification was
> not required until '96 model production.
>
> As an OBD I compliant vehicle, you can buy a Chrysler scan tool for
> about $30.
>
>
>
>
>
>
>
> "neonhighlite" <neonhighlite@yahoo.com> wrote in message
> news:bc58802b707bd070681c73711e62c0ff@localhost.ta lkaboutautos.com...
>
>> i have a 95' grande cherokee LTD 5.2 and im a mechanic but im coming here
>> to see if any one knows where the DCL (OBD connector) is?. i bought it
>> used it may have been "altered" im not sure but just write back...thanks
>> alot guys
>>
>

Lon

'95s are definitely obd 1 and have a couple connectors. For the engine
stuff it is pretty obvious near the engine controller. Another one
inside by the console up post for the gewgaws.


Jeff Strickland proclaimed:

> The OBD II specification says the data port must be located along the
> bottom edge of the dash board. It is generally in the area above your
> left leg while youa re driving. Usually it is exposed and you do not
> have to hunt for it, this is part of the specification -- the port has
> to be easy to locate -- but some automakers -- Jeep isn't among them as
> far as I know -- that put the data port behind a cover but when they do
> this they are required to clearly annotate the cover as containing the
> data port, and nothing else can be behaind the cover with the data port.
>
> One thing that you might find is that your '95 is OBD I, not OBD II.
> Some '95 cars and trucks are OBD II, but the OBD II specification was
> not required until '96 model production.
>
> As an OBD I compliant vehicle, you can buy a Chrysler scan tool for
> about $30.
>
>
>
>
>
>
>
> "neonhighlite" <neonhighlite@yahoo.com> wrote in message
> news:bc58802b707bd070681c73711e62c0ff@localhost.ta lkaboutautos.com...
>
>> i have a 95' grande cherokee LTD 5.2 and im a mechanic but im coming here
>> to see if any one knows where the DCL (OBD connector) is?. i bought it
>> used it may have been "altered" im not sure but just write back...thanks
>> alot guys
>>
>

Lon

'95s are definitely obd 1 and have a couple connectors. For the engine
stuff it is pretty obvious near the engine controller. Another one
inside by the console up post for the gewgaws.


Jeff Strickland proclaimed:

> The OBD II specification says the data port must be located along the
> bottom edge of the dash board. It is generally in the area above your
> left leg while youa re driving. Usually it is exposed and you do not
> have to hunt for it, this is part of the specification -- the port has
> to be easy to locate -- but some automakers -- Jeep isn't among them as
> far as I know -- that put the data port behind a cover but when they do
> this they are required to clearly annotate the cover as containing the
> data port, and nothing else can be behaind the cover with the data port.
>
> One thing that you might find is that your '95 is OBD I, not OBD II.
> Some '95 cars and trucks are OBD II, but the OBD II specification was
> not required until '96 model production.
>
> As an OBD I compliant vehicle, you can buy a Chrysler scan tool for
> about $30.
>
>
>
>
>
>
>
> "neonhighlite" <neonhighlite@yahoo.com> wrote in message
> news:bc58802b707bd070681c73711e62c0ff@localhost.ta lkaboutautos.com...
>
>> i have a 95' grande cherokee LTD 5.2 and im a mechanic but im coming here
>> to see if any one knows where the DCL (OBD connector) is?. i bought it
>> used it may have been "altered" im not sure but just write back...thanks
>> alot guys
>>
>