O2 sensor location on a 4.0L Manifold?
Guest
Posts: n/a
Re: O2 sensor location on a 4.0L Manifold?
I thought the 4.2 manifolds will fit on the 4.0. I do believe the other
way works and can dig up a link on that.
Why not just stay stock or get a header with an O2 port or just kill the
stupid computer and get a sweet 25% boost in power without touching
anything?
That Ford emissions computer is a bag of dirt when the Jeeps get older.
A manually set up machine runs way better and passes emissions.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> So for me to put the 4.0L head on my jeep with EFI I would need both the
> 4.0L manifold plus a section of exhaust pipe for the O2 sensor.
>
> bill
>
> "curt" <nospam@verizon.net> wrote in message
> news:Ptigb.27662$kD3.7198@nwrdny03.gnilink.net...
> > There are two O2 sensors on the exhaust on a 4.0. The first one is on the
> > down tube after the exhaust manifold. It is easily seen when under the
> Jeep
> > behind the driver side front wheel. The second it on the cat converter.
> >
> > Curt
> >
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:bls0b6$fj4j0$1@ID-193866.news.uni-berlin.de...
> > > I'm researching putting the 4.0L head on my 4.2L engine. On the 4.2L,
> the
> > > O2 sensor is in the exhaust manifold. When I researched the exhaust
> > > manifold for the 4.0L Head I didn't see a location for the O2 sensor.
> > >
> > > So my question is, where is the O2 Sensor located on engines with a 4.0L
> > > Head and Exhaust manifold?
> > >
> > > If I put a 4.0L head and exhaust manifold on my 4.2L engine, where will
> > the
> > > O2 sensor go?
> > >
> > > tia,
> > >
> > > bill
> > >
> > >
> >
> >
way works and can dig up a link on that.
Why not just stay stock or get a header with an O2 port or just kill the
stupid computer and get a sweet 25% boost in power without touching
anything?
That Ford emissions computer is a bag of dirt when the Jeeps get older.
A manually set up machine runs way better and passes emissions.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> So for me to put the 4.0L head on my jeep with EFI I would need both the
> 4.0L manifold plus a section of exhaust pipe for the O2 sensor.
>
> bill
>
> "curt" <nospam@verizon.net> wrote in message
> news:Ptigb.27662$kD3.7198@nwrdny03.gnilink.net...
> > There are two O2 sensors on the exhaust on a 4.0. The first one is on the
> > down tube after the exhaust manifold. It is easily seen when under the
> Jeep
> > behind the driver side front wheel. The second it on the cat converter.
> >
> > Curt
> >
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:bls0b6$fj4j0$1@ID-193866.news.uni-berlin.de...
> > > I'm researching putting the 4.0L head on my 4.2L engine. On the 4.2L,
> the
> > > O2 sensor is in the exhaust manifold. When I researched the exhaust
> > > manifold for the 4.0L Head I didn't see a location for the O2 sensor.
> > >
> > > So my question is, where is the O2 Sensor located on engines with a 4.0L
> > > Head and Exhaust manifold?
> > >
> > > If I put a 4.0L head and exhaust manifold on my 4.2L engine, where will
> > the
> > > O2 sensor go?
> > >
> > > tia,
> > >
> > > bill
> > >
> > >
> >
> >
Guest
Posts: n/a
Re: O2 sensor location on a 4.0L Manifold?
I thought the 4.2 manifolds will fit on the 4.0. I do believe the other
way works and can dig up a link on that.
Why not just stay stock or get a header with an O2 port or just kill the
stupid computer and get a sweet 25% boost in power without touching
anything?
That Ford emissions computer is a bag of dirt when the Jeeps get older.
A manually set up machine runs way better and passes emissions.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> So for me to put the 4.0L head on my jeep with EFI I would need both the
> 4.0L manifold plus a section of exhaust pipe for the O2 sensor.
>
> bill
>
> "curt" <nospam@verizon.net> wrote in message
> news:Ptigb.27662$kD3.7198@nwrdny03.gnilink.net...
> > There are two O2 sensors on the exhaust on a 4.0. The first one is on the
> > down tube after the exhaust manifold. It is easily seen when under the
> Jeep
> > behind the driver side front wheel. The second it on the cat converter.
> >
> > Curt
> >
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:bls0b6$fj4j0$1@ID-193866.news.uni-berlin.de...
> > > I'm researching putting the 4.0L head on my 4.2L engine. On the 4.2L,
> the
> > > O2 sensor is in the exhaust manifold. When I researched the exhaust
> > > manifold for the 4.0L Head I didn't see a location for the O2 sensor.
> > >
> > > So my question is, where is the O2 Sensor located on engines with a 4.0L
> > > Head and Exhaust manifold?
> > >
> > > If I put a 4.0L head and exhaust manifold on my 4.2L engine, where will
> > the
> > > O2 sensor go?
> > >
> > > tia,
> > >
> > > bill
> > >
> > >
> >
> >
way works and can dig up a link on that.
Why not just stay stock or get a header with an O2 port or just kill the
stupid computer and get a sweet 25% boost in power without touching
anything?
That Ford emissions computer is a bag of dirt when the Jeeps get older.
A manually set up machine runs way better and passes emissions.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> So for me to put the 4.0L head on my jeep with EFI I would need both the
> 4.0L manifold plus a section of exhaust pipe for the O2 sensor.
>
> bill
>
> "curt" <nospam@verizon.net> wrote in message
> news:Ptigb.27662$kD3.7198@nwrdny03.gnilink.net...
> > There are two O2 sensors on the exhaust on a 4.0. The first one is on the
> > down tube after the exhaust manifold. It is easily seen when under the
> Jeep
> > behind the driver side front wheel. The second it on the cat converter.
> >
> > Curt
> >
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:bls0b6$fj4j0$1@ID-193866.news.uni-berlin.de...
> > > I'm researching putting the 4.0L head on my 4.2L engine. On the 4.2L,
> the
> > > O2 sensor is in the exhaust manifold. When I researched the exhaust
> > > manifold for the 4.0L Head I didn't see a location for the O2 sensor.
> > >
> > > So my question is, where is the O2 Sensor located on engines with a 4.0L
> > > Head and Exhaust manifold?
> > >
> > > If I put a 4.0L head and exhaust manifold on my 4.2L engine, where will
> > the
> > > O2 sensor go?
> > >
> > > tia,
> > >
> > > bill
> > >
> > >
> >
> >
Guest
Posts: n/a
Re: O2 sensor location on a 4.0L Manifold?
I thought the 4.2 manifolds will fit on the 4.0. I do believe the other
way works and can dig up a link on that.
Why not just stay stock or get a header with an O2 port or just kill the
stupid computer and get a sweet 25% boost in power without touching
anything?
That Ford emissions computer is a bag of dirt when the Jeeps get older.
A manually set up machine runs way better and passes emissions.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> So for me to put the 4.0L head on my jeep with EFI I would need both the
> 4.0L manifold plus a section of exhaust pipe for the O2 sensor.
>
> bill
>
> "curt" <nospam@verizon.net> wrote in message
> news:Ptigb.27662$kD3.7198@nwrdny03.gnilink.net...
> > There are two O2 sensors on the exhaust on a 4.0. The first one is on the
> > down tube after the exhaust manifold. It is easily seen when under the
> Jeep
> > behind the driver side front wheel. The second it on the cat converter.
> >
> > Curt
> >
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:bls0b6$fj4j0$1@ID-193866.news.uni-berlin.de...
> > > I'm researching putting the 4.0L head on my 4.2L engine. On the 4.2L,
> the
> > > O2 sensor is in the exhaust manifold. When I researched the exhaust
> > > manifold for the 4.0L Head I didn't see a location for the O2 sensor.
> > >
> > > So my question is, where is the O2 Sensor located on engines with a 4.0L
> > > Head and Exhaust manifold?
> > >
> > > If I put a 4.0L head and exhaust manifold on my 4.2L engine, where will
> > the
> > > O2 sensor go?
> > >
> > > tia,
> > >
> > > bill
> > >
> > >
> >
> >
way works and can dig up a link on that.
Why not just stay stock or get a header with an O2 port or just kill the
stupid computer and get a sweet 25% boost in power without touching
anything?
That Ford emissions computer is a bag of dirt when the Jeeps get older.
A manually set up machine runs way better and passes emissions.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> So for me to put the 4.0L head on my jeep with EFI I would need both the
> 4.0L manifold plus a section of exhaust pipe for the O2 sensor.
>
> bill
>
> "curt" <nospam@verizon.net> wrote in message
> news:Ptigb.27662$kD3.7198@nwrdny03.gnilink.net...
> > There are two O2 sensors on the exhaust on a 4.0. The first one is on the
> > down tube after the exhaust manifold. It is easily seen when under the
> Jeep
> > behind the driver side front wheel. The second it on the cat converter.
> >
> > Curt
> >
> >
> > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > news:bls0b6$fj4j0$1@ID-193866.news.uni-berlin.de...
> > > I'm researching putting the 4.0L head on my 4.2L engine. On the 4.2L,
> the
> > > O2 sensor is in the exhaust manifold. When I researched the exhaust
> > > manifold for the 4.0L Head I didn't see a location for the O2 sensor.
> > >
> > > So my question is, where is the O2 Sensor located on engines with a 4.0L
> > > Head and Exhaust manifold?
> > >
> > > If I put a 4.0L head and exhaust manifold on my 4.2L engine, where will
> > the
> > > O2 sensor go?
> > >
> > > tia,
> > >
> > > bill
> > >
> > >
> >
> >
Guest
Posts: n/a
Re: O2 sensor location on a 4.0L Manifold?
This is a Mopar MPI Mike, not the old computer you're talking about.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F81F0A4.449071B5@sympatico.ca...
> I thought the 4.2 manifolds will fit on the 4.0. I do believe the other
> way works and can dig up a link on that.
>
> Why not just stay stock or get a header with an O2 port or just kill the
> stupid computer and get a sweet 25% boost in power without touching
> anything?
>
> That Ford emissions computer is a bag of dirt when the Jeeps get older.
> A manually set up machine runs way better and passes emissions.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > So for me to put the 4.0L head on my jeep with EFI I would need both the
> > 4.0L manifold plus a section of exhaust pipe for the O2 sensor.
> >
> > bill
> >
> > "curt" <nospam@verizon.net> wrote in message
> > news:Ptigb.27662$kD3.7198@nwrdny03.gnilink.net...
> > > There are two O2 sensors on the exhaust on a 4.0. The first one is on
the
> > > down tube after the exhaust manifold. It is easily seen when under
the
> > Jeep
> > > behind the driver side front wheel. The second it on the cat
converter.
> > >
> > > Curt
> > >
> > >
> > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > news:bls0b6$fj4j0$1@ID-193866.news.uni-berlin.de...
> > > > I'm researching putting the 4.0L head on my 4.2L engine. On the
4.2L,
> > the
> > > > O2 sensor is in the exhaust manifold. When I researched the exhaust
> > > > manifold for the 4.0L Head I didn't see a location for the O2
sensor.
> > > >
> > > > So my question is, where is the O2 Sensor located on engines with a
4.0L
> > > > Head and Exhaust manifold?
> > > >
> > > > If I put a 4.0L head and exhaust manifold on my 4.2L engine, where
will
> > > the
> > > > O2 sensor go?
> > > >
> > > > tia,
> > > >
> > > > bill
> > > >
> > > >
> > >
> > >
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F81F0A4.449071B5@sympatico.ca...
> I thought the 4.2 manifolds will fit on the 4.0. I do believe the other
> way works and can dig up a link on that.
>
> Why not just stay stock or get a header with an O2 port or just kill the
> stupid computer and get a sweet 25% boost in power without touching
> anything?
>
> That Ford emissions computer is a bag of dirt when the Jeeps get older.
> A manually set up machine runs way better and passes emissions.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > So for me to put the 4.0L head on my jeep with EFI I would need both the
> > 4.0L manifold plus a section of exhaust pipe for the O2 sensor.
> >
> > bill
> >
> > "curt" <nospam@verizon.net> wrote in message
> > news:Ptigb.27662$kD3.7198@nwrdny03.gnilink.net...
> > > There are two O2 sensors on the exhaust on a 4.0. The first one is on
the
> > > down tube after the exhaust manifold. It is easily seen when under
the
> > Jeep
> > > behind the driver side front wheel. The second it on the cat
converter.
> > >
> > > Curt
> > >
> > >
> > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > news:bls0b6$fj4j0$1@ID-193866.news.uni-berlin.de...
> > > > I'm researching putting the 4.0L head on my 4.2L engine. On the
4.2L,
> > the
> > > > O2 sensor is in the exhaust manifold. When I researched the exhaust
> > > > manifold for the 4.0L Head I didn't see a location for the O2
sensor.
> > > >
> > > > So my question is, where is the O2 Sensor located on engines with a
4.0L
> > > > Head and Exhaust manifold?
> > > >
> > > > If I put a 4.0L head and exhaust manifold on my 4.2L engine, where
will
> > > the
> > > > O2 sensor go?
> > > >
> > > > tia,
> > > >
> > > > bill
> > > >
> > > >
> > >
> > >
Guest
Posts: n/a
Re: O2 sensor location on a 4.0L Manifold?
This is a Mopar MPI Mike, not the old computer you're talking about.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F81F0A4.449071B5@sympatico.ca...
> I thought the 4.2 manifolds will fit on the 4.0. I do believe the other
> way works and can dig up a link on that.
>
> Why not just stay stock or get a header with an O2 port or just kill the
> stupid computer and get a sweet 25% boost in power without touching
> anything?
>
> That Ford emissions computer is a bag of dirt when the Jeeps get older.
> A manually set up machine runs way better and passes emissions.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > So for me to put the 4.0L head on my jeep with EFI I would need both the
> > 4.0L manifold plus a section of exhaust pipe for the O2 sensor.
> >
> > bill
> >
> > "curt" <nospam@verizon.net> wrote in message
> > news:Ptigb.27662$kD3.7198@nwrdny03.gnilink.net...
> > > There are two O2 sensors on the exhaust on a 4.0. The first one is on
the
> > > down tube after the exhaust manifold. It is easily seen when under
the
> > Jeep
> > > behind the driver side front wheel. The second it on the cat
converter.
> > >
> > > Curt
> > >
> > >
> > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > news:bls0b6$fj4j0$1@ID-193866.news.uni-berlin.de...
> > > > I'm researching putting the 4.0L head on my 4.2L engine. On the
4.2L,
> > the
> > > > O2 sensor is in the exhaust manifold. When I researched the exhaust
> > > > manifold for the 4.0L Head I didn't see a location for the O2
sensor.
> > > >
> > > > So my question is, where is the O2 Sensor located on engines with a
4.0L
> > > > Head and Exhaust manifold?
> > > >
> > > > If I put a 4.0L head and exhaust manifold on my 4.2L engine, where
will
> > > the
> > > > O2 sensor go?
> > > >
> > > > tia,
> > > >
> > > > bill
> > > >
> > > >
> > >
> > >
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F81F0A4.449071B5@sympatico.ca...
> I thought the 4.2 manifolds will fit on the 4.0. I do believe the other
> way works and can dig up a link on that.
>
> Why not just stay stock or get a header with an O2 port or just kill the
> stupid computer and get a sweet 25% boost in power without touching
> anything?
>
> That Ford emissions computer is a bag of dirt when the Jeeps get older.
> A manually set up machine runs way better and passes emissions.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > So for me to put the 4.0L head on my jeep with EFI I would need both the
> > 4.0L manifold plus a section of exhaust pipe for the O2 sensor.
> >
> > bill
> >
> > "curt" <nospam@verizon.net> wrote in message
> > news:Ptigb.27662$kD3.7198@nwrdny03.gnilink.net...
> > > There are two O2 sensors on the exhaust on a 4.0. The first one is on
the
> > > down tube after the exhaust manifold. It is easily seen when under
the
> > Jeep
> > > behind the driver side front wheel. The second it on the cat
converter.
> > >
> > > Curt
> > >
> > >
> > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > news:bls0b6$fj4j0$1@ID-193866.news.uni-berlin.de...
> > > > I'm researching putting the 4.0L head on my 4.2L engine. On the
4.2L,
> > the
> > > > O2 sensor is in the exhaust manifold. When I researched the exhaust
> > > > manifold for the 4.0L Head I didn't see a location for the O2
sensor.
> > > >
> > > > So my question is, where is the O2 Sensor located on engines with a
4.0L
> > > > Head and Exhaust manifold?
> > > >
> > > > If I put a 4.0L head and exhaust manifold on my 4.2L engine, where
will
> > > the
> > > > O2 sensor go?
> > > >
> > > > tia,
> > > >
> > > > bill
> > > >
> > > >
> > >
> > >
Guest
Posts: n/a
Re: O2 sensor location on a 4.0L Manifold?
This is a Mopar MPI Mike, not the old computer you're talking about.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F81F0A4.449071B5@sympatico.ca...
> I thought the 4.2 manifolds will fit on the 4.0. I do believe the other
> way works and can dig up a link on that.
>
> Why not just stay stock or get a header with an O2 port or just kill the
> stupid computer and get a sweet 25% boost in power without touching
> anything?
>
> That Ford emissions computer is a bag of dirt when the Jeeps get older.
> A manually set up machine runs way better and passes emissions.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > So for me to put the 4.0L head on my jeep with EFI I would need both the
> > 4.0L manifold plus a section of exhaust pipe for the O2 sensor.
> >
> > bill
> >
> > "curt" <nospam@verizon.net> wrote in message
> > news:Ptigb.27662$kD3.7198@nwrdny03.gnilink.net...
> > > There are two O2 sensors on the exhaust on a 4.0. The first one is on
the
> > > down tube after the exhaust manifold. It is easily seen when under
the
> > Jeep
> > > behind the driver side front wheel. The second it on the cat
converter.
> > >
> > > Curt
> > >
> > >
> > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > news:bls0b6$fj4j0$1@ID-193866.news.uni-berlin.de...
> > > > I'm researching putting the 4.0L head on my 4.2L engine. On the
4.2L,
> > the
> > > > O2 sensor is in the exhaust manifold. When I researched the exhaust
> > > > manifold for the 4.0L Head I didn't see a location for the O2
sensor.
> > > >
> > > > So my question is, where is the O2 Sensor located on engines with a
4.0L
> > > > Head and Exhaust manifold?
> > > >
> > > > If I put a 4.0L head and exhaust manifold on my 4.2L engine, where
will
> > > the
> > > > O2 sensor go?
> > > >
> > > > tia,
> > > >
> > > > bill
> > > >
> > > >
> > >
> > >
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F81F0A4.449071B5@sympatico.ca...
> I thought the 4.2 manifolds will fit on the 4.0. I do believe the other
> way works and can dig up a link on that.
>
> Why not just stay stock or get a header with an O2 port or just kill the
> stupid computer and get a sweet 25% boost in power without touching
> anything?
>
> That Ford emissions computer is a bag of dirt when the Jeeps get older.
> A manually set up machine runs way better and passes emissions.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > So for me to put the 4.0L head on my jeep with EFI I would need both the
> > 4.0L manifold plus a section of exhaust pipe for the O2 sensor.
> >
> > bill
> >
> > "curt" <nospam@verizon.net> wrote in message
> > news:Ptigb.27662$kD3.7198@nwrdny03.gnilink.net...
> > > There are two O2 sensors on the exhaust on a 4.0. The first one is on
the
> > > down tube after the exhaust manifold. It is easily seen when under
the
> > Jeep
> > > behind the driver side front wheel. The second it on the cat
converter.
> > >
> > > Curt
> > >
> > >
> > > "William Oliveri" <wuji@bigvalley.net> wrote in message
> > > news:bls0b6$fj4j0$1@ID-193866.news.uni-berlin.de...
> > > > I'm researching putting the 4.0L head on my 4.2L engine. On the
4.2L,
> > the
> > > > O2 sensor is in the exhaust manifold. When I researched the exhaust
> > > > manifold for the 4.0L Head I didn't see a location for the O2
sensor.
> > > >
> > > > So my question is, where is the O2 Sensor located on engines with a
4.0L
> > > > Head and Exhaust manifold?
> > > >
> > > > If I put a 4.0L head and exhaust manifold on my 4.2L engine, where
will
> > > the
> > > > O2 sensor go?
> > > >
> > > > tia,
> > > >
> > > > bill
> > > >
> > > >
> > >
> > >
Guest
Posts: n/a
Re: O2 sensor location on a 4.0L Manifold?
Made for the 258" head so I don't see how it will fit the 4.0 litre
head. Their exhaust manifolds are the same as Mike pointed out.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> This is a Mopar MPI Mike, not the old computer you're talking about.
head. Their exhaust manifolds are the same as Mike pointed out.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> This is a Mopar MPI Mike, not the old computer you're talking about.
Guest
Posts: n/a
Re: O2 sensor location on a 4.0L Manifold?
Made for the 258" head so I don't see how it will fit the 4.0 litre
head. Their exhaust manifolds are the same as Mike pointed out.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> This is a Mopar MPI Mike, not the old computer you're talking about.
head. Their exhaust manifolds are the same as Mike pointed out.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> This is a Mopar MPI Mike, not the old computer you're talking about.
Guest
Posts: n/a
Re: O2 sensor location on a 4.0L Manifold?
Made for the 258" head so I don't see how it will fit the 4.0 litre
head. Their exhaust manifolds are the same as Mike pointed out.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> This is a Mopar MPI Mike, not the old computer you're talking about.
head. Their exhaust manifolds are the same as Mike pointed out.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> This is a Mopar MPI Mike, not the old computer you're talking about.
Thread
Thread Starter
Forum
Replies
Last Post
William Oliveri
Jeep Mailing List
31
Aug 23, 2003 11:52 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
