NP231 rear bushing and seal
06-22-2004, 10:33 PM
#1
Guest
Posts: n/a
NP231 rear bushing and seal
It looks like it is my turn to do the a NP-231 transfercase
rear seal. How about the bushing? I am assuming that is
pressed into the rear housing extension. Who or what is the
best way to replace the bushing? I'm think my 94 YJ has
194000 miles on it and so it should be a good idea to
replace that too. If I take it somewhere to have the
bushing swapped, anyone know what it will cost and who
to take it too?
Thanks!
--
Jeeps and dubs and everything's nice...
Replace nospam with jetta for e-mail
rear seal. How about the bushing? I am assuming that is
pressed into the rear housing extension. Who or what is the
best way to replace the bushing? I'm think my 94 YJ has
194000 miles on it and so it should be a good idea to
replace that too. If I take it somewhere to have the
bushing swapped, anyone know what it will cost and who
to take it too?
Thanks!
--
Jeeps and dubs and everything's nice...
Replace nospam with jetta for e-mail
06-22-2004, 10:59 PM
#2
Guest
Posts: n/a
Re: NP231 rear bushing and seal
I'd try making a puller, press out of washers and a bolt:
http://www.thejeep.com/onlinecatalog/p131.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Peter Parker wrote:
>
> It looks like it is my turn to do the a NP-231 transfercase
> rear seal. How about the bushing? I am assuming that is
> pressed into the rear housing extension. Who or what is the
> best way to replace the bushing? I'm think my 94 YJ has
> 194000 miles on it and so it should be a good idea to
> replace that too. If I take it somewhere to have the
> bushing swapped, anyone know what it will cost and who
> to take it too?
>
> Thanks!
> --
> Jeeps and dubs and everything's nice...
> Replace nospam with jetta for e-mail
http://www.thejeep.com/onlinecatalog/p131.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Peter Parker wrote:
>
> It looks like it is my turn to do the a NP-231 transfercase
> rear seal. How about the bushing? I am assuming that is
> pressed into the rear housing extension. Who or what is the
> best way to replace the bushing? I'm think my 94 YJ has
> 194000 miles on it and so it should be a good idea to
> replace that too. If I take it somewhere to have the
> bushing swapped, anyone know what it will cost and who
> to take it too?
>
> Thanks!
> --
> Jeeps and dubs and everything's nice...
> Replace nospam with jetta for e-mail
06-22-2004, 10:59 PM
#3
Guest
Posts: n/a
Re: NP231 rear bushing and seal
I'd try making a puller, press out of washers and a bolt:
http://www.thejeep.com/onlinecatalog/p131.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Peter Parker wrote:
>
> It looks like it is my turn to do the a NP-231 transfercase
> rear seal. How about the bushing? I am assuming that is
> pressed into the rear housing extension. Who or what is the
> best way to replace the bushing? I'm think my 94 YJ has
> 194000 miles on it and so it should be a good idea to
> replace that too. If I take it somewhere to have the
> bushing swapped, anyone know what it will cost and who
> to take it too?
>
> Thanks!
> --
> Jeeps and dubs and everything's nice...
> Replace nospam with jetta for e-mail
http://www.thejeep.com/onlinecatalog/p131.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Peter Parker wrote:
>
> It looks like it is my turn to do the a NP-231 transfercase
> rear seal. How about the bushing? I am assuming that is
> pressed into the rear housing extension. Who or what is the
> best way to replace the bushing? I'm think my 94 YJ has
> 194000 miles on it and so it should be a good idea to
> replace that too. If I take it somewhere to have the
> bushing swapped, anyone know what it will cost and who
> to take it too?
>
> Thanks!
> --
> Jeeps and dubs and everything's nice...
> Replace nospam with jetta for e-mail
06-22-2004, 10:59 PM
#4
Guest
Posts: n/a
Re: NP231 rear bushing and seal
I'd try making a puller, press out of washers and a bolt:
http://www.thejeep.com/onlinecatalog/p131.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Peter Parker wrote:
>
> It looks like it is my turn to do the a NP-231 transfercase
> rear seal. How about the bushing? I am assuming that is
> pressed into the rear housing extension. Who or what is the
> best way to replace the bushing? I'm think my 94 YJ has
> 194000 miles on it and so it should be a good idea to
> replace that too. If I take it somewhere to have the
> bushing swapped, anyone know what it will cost and who
> to take it too?
>
> Thanks!
> --
> Jeeps and dubs and everything's nice...
> Replace nospam with jetta for e-mail
http://www.thejeep.com/onlinecatalog/p131.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Peter Parker wrote:
>
> It looks like it is my turn to do the a NP-231 transfercase
> rear seal. How about the bushing? I am assuming that is
> pressed into the rear housing extension. Who or what is the
> best way to replace the bushing? I'm think my 94 YJ has
> 194000 miles on it and so it should be a good idea to
> replace that too. If I take it somewhere to have the
> bushing swapped, anyone know what it will cost and who
> to take it too?
>
> Thanks!
> --
> Jeeps and dubs and everything's nice...
> Replace nospam with jetta for e-mail
06-22-2004, 10:59 PM
#5
Guest
Posts: n/a
Re: NP231 rear bushing and seal
I'd try making a puller, press out of washers and a bolt:
http://www.thejeep.com/onlinecatalog/p131.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Peter Parker wrote:
>
> It looks like it is my turn to do the a NP-231 transfercase
> rear seal. How about the bushing? I am assuming that is
> pressed into the rear housing extension. Who or what is the
> best way to replace the bushing? I'm think my 94 YJ has
> 194000 miles on it and so it should be a good idea to
> replace that too. If I take it somewhere to have the
> bushing swapped, anyone know what it will cost and who
> to take it too?
>
> Thanks!
> --
> Jeeps and dubs and everything's nice...
> Replace nospam with jetta for e-mail
http://www.thejeep.com/onlinecatalog/p131.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Peter Parker wrote:
>
> It looks like it is my turn to do the a NP-231 transfercase
> rear seal. How about the bushing? I am assuming that is
> pressed into the rear housing extension. Who or what is the
> best way to replace the bushing? I'm think my 94 YJ has
> 194000 miles on it and so it should be a good idea to
> replace that too. If I take it somewhere to have the
> bushing swapped, anyone know what it will cost and who
> to take it too?
>
> Thanks!
> --
> Jeeps and dubs and everything's nice...
> Replace nospam with jetta for e-mail
06-23-2004, 08:34 AM
#6
Guest
Posts: n/a
Re: NP231 rear bushing and seal
In article <40D8F204.2C350F9A@***.net>,
L.W.(=?iso-8859-1?Q?=DFill?=) ------ III <----------@***.net> wrote:
> I'd try making a puller, press out of washers and a bolt:
>http://www.thejeep.com/onlinecatalog/p131.htm
Thanks Bill. I would hate to bugger it up though.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Peter Parker wrote:
>>
>> It looks like it is my turn to do the a NP-231 transfercase
>> rear seal. How about the bushing? I am assuming that is
>> pressed into the rear housing extension. Who or what is the
>> best way to replace the bushing? I'm think my 94 YJ has
>> 194000 miles on it and so it should be a good idea to
>> replace that too. If I take it somewhere to have the
>> bushing swapped, anyone know what it will cost and who
>> to take it too?
>>
>> Thanks!
>> --
>> Jeeps and dubs and everything's nice...
>> Replace nospam with jetta for e-mail
--
Jeeps and dubs and everything's nice...
Replace nospam with jetta for e-mail
L.W.(=?iso-8859-1?Q?=DFill?=) ------ III <----------@***.net> wrote:
> I'd try making a puller, press out of washers and a bolt:
>http://www.thejeep.com/onlinecatalog/p131.htm
Thanks Bill. I would hate to bugger it up though.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Peter Parker wrote:
>>
>> It looks like it is my turn to do the a NP-231 transfercase
>> rear seal. How about the bushing? I am assuming that is
>> pressed into the rear housing extension. Who or what is the
>> best way to replace the bushing? I'm think my 94 YJ has
>> 194000 miles on it and so it should be a good idea to
>> replace that too. If I take it somewhere to have the
>> bushing swapped, anyone know what it will cost and who
>> to take it too?
>>
>> Thanks!
>> --
>> Jeeps and dubs and everything's nice...
>> Replace nospam with jetta for e-mail
--
Jeeps and dubs and everything's nice...
Replace nospam with jetta for e-mail
06-23-2004, 08:34 AM
#7
Guest
Posts: n/a
Re: NP231 rear bushing and seal
In article <40D8F204.2C350F9A@***.net>,
L.W.(=?iso-8859-1?Q?=DFill?=) ------ III <----------@***.net> wrote:
> I'd try making a puller, press out of washers and a bolt:
>http://www.thejeep.com/onlinecatalog/p131.htm
Thanks Bill. I would hate to bugger it up though.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Peter Parker wrote:
>>
>> It looks like it is my turn to do the a NP-231 transfercase
>> rear seal. How about the bushing? I am assuming that is
>> pressed into the rear housing extension. Who or what is the
>> best way to replace the bushing? I'm think my 94 YJ has
>> 194000 miles on it and so it should be a good idea to
>> replace that too. If I take it somewhere to have the
>> bushing swapped, anyone know what it will cost and who
>> to take it too?
>>
>> Thanks!
>> --
>> Jeeps and dubs and everything's nice...
>> Replace nospam with jetta for e-mail
--
Jeeps and dubs and everything's nice...
Replace nospam with jetta for e-mail
L.W.(=?iso-8859-1?Q?=DFill?=) ------ III <----------@***.net> wrote:
> I'd try making a puller, press out of washers and a bolt:
>http://www.thejeep.com/onlinecatalog/p131.htm
Thanks Bill. I would hate to bugger it up though.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Peter Parker wrote:
>>
>> It looks like it is my turn to do the a NP-231 transfercase
>> rear seal. How about the bushing? I am assuming that is
>> pressed into the rear housing extension. Who or what is the
>> best way to replace the bushing? I'm think my 94 YJ has
>> 194000 miles on it and so it should be a good idea to
>> replace that too. If I take it somewhere to have the
>> bushing swapped, anyone know what it will cost and who
>> to take it too?
>>
>> Thanks!
>> --
>> Jeeps and dubs and everything's nice...
>> Replace nospam with jetta for e-mail
--
Jeeps and dubs and everything's nice...
Replace nospam with jetta for e-mail
06-23-2004, 08:34 AM
#8
Guest
Posts: n/a
Re: NP231 rear bushing and seal
In article <40D8F204.2C350F9A@***.net>,
L.W.(=?iso-8859-1?Q?=DFill?=) ------ III <----------@***.net> wrote:
> I'd try making a puller, press out of washers and a bolt:
>http://www.thejeep.com/onlinecatalog/p131.htm
Thanks Bill. I would hate to bugger it up though.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Peter Parker wrote:
>>
>> It looks like it is my turn to do the a NP-231 transfercase
>> rear seal. How about the bushing? I am assuming that is
>> pressed into the rear housing extension. Who or what is the
>> best way to replace the bushing? I'm think my 94 YJ has
>> 194000 miles on it and so it should be a good idea to
>> replace that too. If I take it somewhere to have the
>> bushing swapped, anyone know what it will cost and who
>> to take it too?
>>
>> Thanks!
>> --
>> Jeeps and dubs and everything's nice...
>> Replace nospam with jetta for e-mail
--
Jeeps and dubs and everything's nice...
Replace nospam with jetta for e-mail
L.W.(=?iso-8859-1?Q?=DFill?=) ------ III <----------@***.net> wrote:
> I'd try making a puller, press out of washers and a bolt:
>http://www.thejeep.com/onlinecatalog/p131.htm
Thanks Bill. I would hate to bugger it up though.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Peter Parker wrote:
>>
>> It looks like it is my turn to do the a NP-231 transfercase
>> rear seal. How about the bushing? I am assuming that is
>> pressed into the rear housing extension. Who or what is the
>> best way to replace the bushing? I'm think my 94 YJ has
>> 194000 miles on it and so it should be a good idea to
>> replace that too. If I take it somewhere to have the
>> bushing swapped, anyone know what it will cost and who
>> to take it too?
>>
>> Thanks!
>> --
>> Jeeps and dubs and everything's nice...
>> Replace nospam with jetta for e-mail
--
Jeeps and dubs and everything's nice...
Replace nospam with jetta for e-mail
06-23-2004, 08:34 AM
#9
Guest
Posts: n/a
Re: NP231 rear bushing and seal
In article <40D8F204.2C350F9A@***.net>,
L.W.(=?iso-8859-1?Q?=DFill?=) ------ III <----------@***.net> wrote:
> I'd try making a puller, press out of washers and a bolt:
>http://www.thejeep.com/onlinecatalog/p131.htm
Thanks Bill. I would hate to bugger it up though.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Peter Parker wrote:
>>
>> It looks like it is my turn to do the a NP-231 transfercase
>> rear seal. How about the bushing? I am assuming that is
>> pressed into the rear housing extension. Who or what is the
>> best way to replace the bushing? I'm think my 94 YJ has
>> 194000 miles on it and so it should be a good idea to
>> replace that too. If I take it somewhere to have the
>> bushing swapped, anyone know what it will cost and who
>> to take it too?
>>
>> Thanks!
>> --
>> Jeeps and dubs and everything's nice...
>> Replace nospam with jetta for e-mail
--
Jeeps and dubs and everything's nice...
Replace nospam with jetta for e-mail
L.W.(=?iso-8859-1?Q?=DFill?=) ------ III <----------@***.net> wrote:
> I'd try making a puller, press out of washers and a bolt:
>http://www.thejeep.com/onlinecatalog/p131.htm
Thanks Bill. I would hate to bugger it up though.
> God Bless America, ßill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Peter Parker wrote:
>>
>> It looks like it is my turn to do the a NP-231 transfercase
>> rear seal. How about the bushing? I am assuming that is
>> pressed into the rear housing extension. Who or what is the
>> best way to replace the bushing? I'm think my 94 YJ has
>> 194000 miles on it and so it should be a good idea to
>> replace that too. If I take it somewhere to have the
>> bushing swapped, anyone know what it will cost and who
>> to take it too?
>>
>> Thanks!
>> --
>> Jeeps and dubs and everything's nice...
>> Replace nospam with jetta for e-mail
--
Jeeps and dubs and everything's nice...
Replace nospam with jetta for e-mail
06-23-2004, 04:14 PM
#10
Guest
Posts: n/a
Re: NP231 rear bushing and seal
You really wanted that Slip Yoke Eliminator, like the Real Jeeps
anyway, right? http://www.enjoythedrive.com/content/?id=32931
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Peter Parker wrote:
>
> Thanks Bill. I would hate to bugger it up though.
anyway, right? http://www.enjoythedrive.com/content/?id=32931
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Peter Parker wrote:
>
> Thanks Bill. I would hate to bugger it up though.