NP231 Problems, '97 TJ
#21
Guest
Posts: n/a
Re: NP231 Problems, '97 TJ
I don't recall any rust other than the normal surface rust on everything.
I'll check tomorrow in the daylight again to be sure. I saw the pic with
the chain in it and how it fit in there. How could it be rubbing anything?
Does it stretch? I did try it in 4wd earlier today and it seemed to act the
same way, with any pressure up or down on the shift lever causing a stronger
grinding sound. Man I just hope it doesn't explode like the one dude just
said his had done.
Shawn
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F2153C.BBBAC78E@***.net...
> Hi Shawn,
> Here what the chain looks like:
> http://7slotgrille.com/tech/sye2/index.html
> Look at your universal joints again for the telltale sign of rust,
> indicating dry wore out bearings.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> End wrote:
> >
> > Could I crack it open and replace the chain or is there more to it than
> > that?
> >
> > Shawn
I'll check tomorrow in the daylight again to be sure. I saw the pic with
the chain in it and how it fit in there. How could it be rubbing anything?
Does it stretch? I did try it in 4wd earlier today and it seemed to act the
same way, with any pressure up or down on the shift lever causing a stronger
grinding sound. Man I just hope it doesn't explode like the one dude just
said his had done.
Shawn
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F2153C.BBBAC78E@***.net...
> Hi Shawn,
> Here what the chain looks like:
> http://7slotgrille.com/tech/sye2/index.html
> Look at your universal joints again for the telltale sign of rust,
> indicating dry wore out bearings.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> End wrote:
> >
> > Could I crack it open and replace the chain or is there more to it than
> > that?
> >
> > Shawn
#22
Guest
Posts: n/a
Re: NP231 Problems, '97 TJ
Before it explodes, or makes much in the way of noise, you may feel
it skip a tooth in reverse. I don't think that's what you hear. But,
your "chup chup chup" description, sounds very much like my chirp,
chirp, chirp, bad universal joint.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Endo wrote:
>
> I don't recall any rust other than the normal surface rust on everything.
> I'll check tomorrow in the daylight again to be sure. I saw the pic with
> the chain in it and how it fit in there. How could it be rubbing anything?
> Does it stretch? I did try it in 4wd earlier today and it seemed to act the
> same way, with any pressure up or down on the shift lever causing a stronger
> grinding sound. Man I just hope it doesn't explode like the one dude just
> said his had done.
>
> Shawn
it skip a tooth in reverse. I don't think that's what you hear. But,
your "chup chup chup" description, sounds very much like my chirp,
chirp, chirp, bad universal joint.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Endo wrote:
>
> I don't recall any rust other than the normal surface rust on everything.
> I'll check tomorrow in the daylight again to be sure. I saw the pic with
> the chain in it and how it fit in there. How could it be rubbing anything?
> Does it stretch? I did try it in 4wd earlier today and it seemed to act the
> same way, with any pressure up or down on the shift lever causing a stronger
> grinding sound. Man I just hope it doesn't explode like the one dude just
> said his had done.
>
> Shawn
#23
Guest
Posts: n/a
Re: NP231 Problems, '97 TJ
Before it explodes, or makes much in the way of noise, you may feel
it skip a tooth in reverse. I don't think that's what you hear. But,
your "chup chup chup" description, sounds very much like my chirp,
chirp, chirp, bad universal joint.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Endo wrote:
>
> I don't recall any rust other than the normal surface rust on everything.
> I'll check tomorrow in the daylight again to be sure. I saw the pic with
> the chain in it and how it fit in there. How could it be rubbing anything?
> Does it stretch? I did try it in 4wd earlier today and it seemed to act the
> same way, with any pressure up or down on the shift lever causing a stronger
> grinding sound. Man I just hope it doesn't explode like the one dude just
> said his had done.
>
> Shawn
it skip a tooth in reverse. I don't think that's what you hear. But,
your "chup chup chup" description, sounds very much like my chirp,
chirp, chirp, bad universal joint.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Endo wrote:
>
> I don't recall any rust other than the normal surface rust on everything.
> I'll check tomorrow in the daylight again to be sure. I saw the pic with
> the chain in it and how it fit in there. How could it be rubbing anything?
> Does it stretch? I did try it in 4wd earlier today and it seemed to act the
> same way, with any pressure up or down on the shift lever causing a stronger
> grinding sound. Man I just hope it doesn't explode like the one dude just
> said his had done.
>
> Shawn
#24
Guest
Posts: n/a
Re: NP231 Problems, '97 TJ
Before it explodes, or makes much in the way of noise, you may feel
it skip a tooth in reverse. I don't think that's what you hear. But,
your "chup chup chup" description, sounds very much like my chirp,
chirp, chirp, bad universal joint.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Endo wrote:
>
> I don't recall any rust other than the normal surface rust on everything.
> I'll check tomorrow in the daylight again to be sure. I saw the pic with
> the chain in it and how it fit in there. How could it be rubbing anything?
> Does it stretch? I did try it in 4wd earlier today and it seemed to act the
> same way, with any pressure up or down on the shift lever causing a stronger
> grinding sound. Man I just hope it doesn't explode like the one dude just
> said his had done.
>
> Shawn
it skip a tooth in reverse. I don't think that's what you hear. But,
your "chup chup chup" description, sounds very much like my chirp,
chirp, chirp, bad universal joint.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Endo wrote:
>
> I don't recall any rust other than the normal surface rust on everything.
> I'll check tomorrow in the daylight again to be sure. I saw the pic with
> the chain in it and how it fit in there. How could it be rubbing anything?
> Does it stretch? I did try it in 4wd earlier today and it seemed to act the
> same way, with any pressure up or down on the shift lever causing a stronger
> grinding sound. Man I just hope it doesn't explode like the one dude just
> said his had done.
>
> Shawn
#25
Guest
Posts: n/a
Re: NP231 Problems, '97 TJ
Before it explodes, or makes much in the way of noise, you may feel
it skip a tooth in reverse. I don't think that's what you hear. But,
your "chup chup chup" description, sounds very much like my chirp,
chirp, chirp, bad universal joint.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Endo wrote:
>
> I don't recall any rust other than the normal surface rust on everything.
> I'll check tomorrow in the daylight again to be sure. I saw the pic with
> the chain in it and how it fit in there. How could it be rubbing anything?
> Does it stretch? I did try it in 4wd earlier today and it seemed to act the
> same way, with any pressure up or down on the shift lever causing a stronger
> grinding sound. Man I just hope it doesn't explode like the one dude just
> said his had done.
>
> Shawn
it skip a tooth in reverse. I don't think that's what you hear. But,
your "chup chup chup" description, sounds very much like my chirp,
chirp, chirp, bad universal joint.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Endo wrote:
>
> I don't recall any rust other than the normal surface rust on everything.
> I'll check tomorrow in the daylight again to be sure. I saw the pic with
> the chain in it and how it fit in there. How could it be rubbing anything?
> Does it stretch? I did try it in 4wd earlier today and it seemed to act the
> same way, with any pressure up or down on the shift lever causing a stronger
> grinding sound. Man I just hope it doesn't explode like the one dude just
> said his had done.
>
> Shawn
#26
Guest
Posts: n/a
Re: NP231 Problems, '97 TJ
How does applying pressure on the shift lever work into your diagnosis?
Shawn
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F223DE.C3AFF60E@***.net...
> Before it explodes, or makes much in the way of noise, you may feel
> it skip a tooth in reverse. I don't think that's what you hear. But,
> your "chup chup chup" description, sounds very much like my chirp,
> chirp, chirp, bad universal joint.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Endo wrote:
> >
> > I don't recall any rust other than the normal surface rust on
everything.
> > I'll check tomorrow in the daylight again to be sure. I saw the pic
with
> > the chain in it and how it fit in there. How could it be rubbing
anything?
> > Does it stretch? I did try it in 4wd earlier today and it seemed to act
the
> > same way, with any pressure up or down on the shift lever causing a
stronger
> > grinding sound. Man I just hope it doesn't explode like the one dude
just
> > said his had done.
> >
> > Shawn
Shawn
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F223DE.C3AFF60E@***.net...
> Before it explodes, or makes much in the way of noise, you may feel
> it skip a tooth in reverse. I don't think that's what you hear. But,
> your "chup chup chup" description, sounds very much like my chirp,
> chirp, chirp, bad universal joint.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Endo wrote:
> >
> > I don't recall any rust other than the normal surface rust on
everything.
> > I'll check tomorrow in the daylight again to be sure. I saw the pic
with
> > the chain in it and how it fit in there. How could it be rubbing
anything?
> > Does it stretch? I did try it in 4wd earlier today and it seemed to act
the
> > same way, with any pressure up or down on the shift lever causing a
stronger
> > grinding sound. Man I just hope it doesn't explode like the one dude
just
> > said his had done.
> >
> > Shawn
#27
Guest
Posts: n/a
Re: NP231 Problems, '97 TJ
How does applying pressure on the shift lever work into your diagnosis?
Shawn
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F223DE.C3AFF60E@***.net...
> Before it explodes, or makes much in the way of noise, you may feel
> it skip a tooth in reverse. I don't think that's what you hear. But,
> your "chup chup chup" description, sounds very much like my chirp,
> chirp, chirp, bad universal joint.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Endo wrote:
> >
> > I don't recall any rust other than the normal surface rust on
everything.
> > I'll check tomorrow in the daylight again to be sure. I saw the pic
with
> > the chain in it and how it fit in there. How could it be rubbing
anything?
> > Does it stretch? I did try it in 4wd earlier today and it seemed to act
the
> > same way, with any pressure up or down on the shift lever causing a
stronger
> > grinding sound. Man I just hope it doesn't explode like the one dude
just
> > said his had done.
> >
> > Shawn
Shawn
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F223DE.C3AFF60E@***.net...
> Before it explodes, or makes much in the way of noise, you may feel
> it skip a tooth in reverse. I don't think that's what you hear. But,
> your "chup chup chup" description, sounds very much like my chirp,
> chirp, chirp, bad universal joint.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Endo wrote:
> >
> > I don't recall any rust other than the normal surface rust on
everything.
> > I'll check tomorrow in the daylight again to be sure. I saw the pic
with
> > the chain in it and how it fit in there. How could it be rubbing
anything?
> > Does it stretch? I did try it in 4wd earlier today and it seemed to act
the
> > same way, with any pressure up or down on the shift lever causing a
stronger
> > grinding sound. Man I just hope it doesn't explode like the one dude
just
> > said his had done.
> >
> > Shawn
#28
Guest
Posts: n/a
Re: NP231 Problems, '97 TJ
How does applying pressure on the shift lever work into your diagnosis?
Shawn
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F223DE.C3AFF60E@***.net...
> Before it explodes, or makes much in the way of noise, you may feel
> it skip a tooth in reverse. I don't think that's what you hear. But,
> your "chup chup chup" description, sounds very much like my chirp,
> chirp, chirp, bad universal joint.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Endo wrote:
> >
> > I don't recall any rust other than the normal surface rust on
everything.
> > I'll check tomorrow in the daylight again to be sure. I saw the pic
with
> > the chain in it and how it fit in there. How could it be rubbing
anything?
> > Does it stretch? I did try it in 4wd earlier today and it seemed to act
the
> > same way, with any pressure up or down on the shift lever causing a
stronger
> > grinding sound. Man I just hope it doesn't explode like the one dude
just
> > said his had done.
> >
> > Shawn
Shawn
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F223DE.C3AFF60E@***.net...
> Before it explodes, or makes much in the way of noise, you may feel
> it skip a tooth in reverse. I don't think that's what you hear. But,
> your "chup chup chup" description, sounds very much like my chirp,
> chirp, chirp, bad universal joint.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Endo wrote:
> >
> > I don't recall any rust other than the normal surface rust on
everything.
> > I'll check tomorrow in the daylight again to be sure. I saw the pic
with
> > the chain in it and how it fit in there. How could it be rubbing
anything?
> > Does it stretch? I did try it in 4wd earlier today and it seemed to act
the
> > same way, with any pressure up or down on the shift lever causing a
stronger
> > grinding sound. Man I just hope it doesn't explode like the one dude
just
> > said his had done.
> >
> > Shawn
#29
Guest
Posts: n/a
Re: NP231 Problems, '97 TJ
How does applying pressure on the shift lever work into your diagnosis?
Shawn
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F223DE.C3AFF60E@***.net...
> Before it explodes, or makes much in the way of noise, you may feel
> it skip a tooth in reverse. I don't think that's what you hear. But,
> your "chup chup chup" description, sounds very much like my chirp,
> chirp, chirp, bad universal joint.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Endo wrote:
> >
> > I don't recall any rust other than the normal surface rust on
everything.
> > I'll check tomorrow in the daylight again to be sure. I saw the pic
with
> > the chain in it and how it fit in there. How could it be rubbing
anything?
> > Does it stretch? I did try it in 4wd earlier today and it seemed to act
the
> > same way, with any pressure up or down on the shift lever causing a
stronger
> > grinding sound. Man I just hope it doesn't explode like the one dude
just
> > said his had done.
> >
> > Shawn
Shawn
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40F223DE.C3AFF60E@***.net...
> Before it explodes, or makes much in the way of noise, you may feel
> it skip a tooth in reverse. I don't think that's what you hear. But,
> your "chup chup chup" description, sounds very much like my chirp,
> chirp, chirp, bad universal joint.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Endo wrote:
> >
> > I don't recall any rust other than the normal surface rust on
everything.
> > I'll check tomorrow in the daylight again to be sure. I saw the pic
with
> > the chain in it and how it fit in there. How could it be rubbing
anything?
> > Does it stretch? I did try it in 4wd earlier today and it seemed to act
the
> > same way, with any pressure up or down on the shift lever causing a
stronger
> > grinding sound. Man I just hope it doesn't explode like the one dude
just
> > said his had done.
> >
> > Shawn
#30
Guest
Posts: n/a
Re: NP231 Problems, '97 TJ
"Nick N" <nnote@despammed.com> wrote in message news:<S2pIc.1679$Am.1575@fed1read07>...
> Search the net, there is a chain from a ford or a chevy? that fits the np231
> and is stronger and bigger.
> Nick
>
> "Endo" <me@oh.my> wrote in message
> news:Xr-dneaG19-FjW_dRVn-sQ@comcast.com...
> > Could I crack it open and replace the chain or is there more to it than
> > that?
> >
> > Shawn
> >
> >
> > "John in Vegas" <johnina99tj@netscape.net> wrote in message
> > news:4RmIc.7024$i_3.6974@fed1read04...
> > > I have had 2 NP231 wear out the chains, and what happens there is the
> > > chain scrapes on the bottom of the case. I also had one 231 kind of
> > > explode on me.
> > >
> > > John in Vegas
> > >
> > > Endo wrote:
> > > > I'm having some odd noises while driving around that sound like a worn
> brake
> > > > pad grinding against the rotor. There's also a bit of what I can only
> think
> > > > to describe as a rotational sound ('chup chup chup') that's seeming to
> be
> > > > only half as fast as the tires are moving (making me think drivesahft
> or
> the
> > > > like). When I pull or push slightly on my transfer case shift lever
> while in
> > > > 2wd, it intensifies ALOT. I don't think the noise goes away while in
> 4wd
> > > > h/l, but if someone thinks it's relevant i'll confirm on my next
> drive.
> > > >
> > > > What the hell is wrong here? Is my transfer case about to ---- the bed
> on
> > > > me?
> > > >
> > > > __________________
I have the same problem and have been putting off replacing the
stretched chain. For sanity's sake, does the chain engage(turn) when
only driving in 2 Wheel High?
> > > > '97 TJ 4.0 A/T
> > > > Alarm w/remote start
> > > > PCW EMR050 15" wheels
> > > > BFG AT T/A KO's 31x10.50
> > > > KC 46 series fog lights
> > > > Front tow hooks
> > > > Front bumper end-cap delete
> > > > Banks Power Torquetube header
> > > > Airaid drop-in replacement filter
> > > > Alpine CD head unit
> > > > Audiovox Sirius satelite radio tuner
> > > > Uniden Beartracker BCT12 scanner
> > > > Yaesu FT-2600 VHF Ham Radio
> > > >
> > > >
> > >
> >
> >
> Search the net, there is a chain from a ford or a chevy? that fits the np231
> and is stronger and bigger.
> Nick
>
> "Endo" <me@oh.my> wrote in message
> news:Xr-dneaG19-FjW_dRVn-sQ@comcast.com...
> > Could I crack it open and replace the chain or is there more to it than
> > that?
> >
> > Shawn
> >
> >
> > "John in Vegas" <johnina99tj@netscape.net> wrote in message
> > news:4RmIc.7024$i_3.6974@fed1read04...
> > > I have had 2 NP231 wear out the chains, and what happens there is the
> > > chain scrapes on the bottom of the case. I also had one 231 kind of
> > > explode on me.
> > >
> > > John in Vegas
> > >
> > > Endo wrote:
> > > > I'm having some odd noises while driving around that sound like a worn
> brake
> > > > pad grinding against the rotor. There's also a bit of what I can only
> think
> > > > to describe as a rotational sound ('chup chup chup') that's seeming to
> be
> > > > only half as fast as the tires are moving (making me think drivesahft
> or
> the
> > > > like). When I pull or push slightly on my transfer case shift lever
> while in
> > > > 2wd, it intensifies ALOT. I don't think the noise goes away while in
> 4wd
> > > > h/l, but if someone thinks it's relevant i'll confirm on my next
> drive.
> > > >
> > > > What the hell is wrong here? Is my transfer case about to ---- the bed
> on
> > > > me?
> > > >
> > > > __________________
I have the same problem and have been putting off replacing the
stretched chain. For sanity's sake, does the chain engage(turn) when
only driving in 2 Wheel High?
> > > > '97 TJ 4.0 A/T
> > > > Alarm w/remote start
> > > > PCW EMR050 15" wheels
> > > > BFG AT T/A KO's 31x10.50
> > > > KC 46 series fog lights
> > > > Front tow hooks
> > > > Front bumper end-cap delete
> > > > Banks Power Torquetube header
> > > > Airaid drop-in replacement filter
> > > > Alpine CD head unit
> > > > Audiovox Sirius satelite radio tuner
> > > > Uniden Beartracker BCT12 scanner
> > > > Yaesu FT-2600 VHF Ham Radio
> > > >
> > > >
> > >
> >
> >