No Spark
10-19-2005, 12:52 PM
#2
Guest
Posts: n/a
Re: No Spark
Are you getting any diagnostic codes? Is the camshaft position sensor
working ok?
Fred Garvin wrote:
> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> replaced the Crank Shaft position sensor and ignition coil stip - still no
> spark?
>
> Anybody have a suggestion of where to go next?
>
> Many thanks!
>
> Fred
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
working ok?
Fred Garvin wrote:
> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> replaced the Crank Shaft position sensor and ignition coil stip - still no
> spark?
>
> Anybody have a suggestion of where to go next?
>
> Many thanks!
>
> Fred
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
10-19-2005, 12:52 PM
#3
Guest
Posts: n/a
Re: No Spark
Are you getting any diagnostic codes? Is the camshaft position sensor
working ok?
Fred Garvin wrote:
> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> replaced the Crank Shaft position sensor and ignition coil stip - still no
> spark?
>
> Anybody have a suggestion of where to go next?
>
> Many thanks!
>
> Fred
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
working ok?
Fred Garvin wrote:
> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> replaced the Crank Shaft position sensor and ignition coil stip - still no
> spark?
>
> Anybody have a suggestion of where to go next?
>
> Many thanks!
>
> Fred
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
10-19-2005, 12:52 PM
#4
Guest
Posts: n/a
Re: No Spark
Are you getting any diagnostic codes? Is the camshaft position sensor
working ok?
Fred Garvin wrote:
> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> replaced the Crank Shaft position sensor and ignition coil stip - still no
> spark?
>
> Anybody have a suggestion of where to go next?
>
> Many thanks!
>
> Fred
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
working ok?
Fred Garvin wrote:
> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
> replaced the Crank Shaft position sensor and ignition coil stip - still no
> spark?
>
> Anybody have a suggestion of where to go next?
>
> Many thanks!
>
> Fred
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
10-19-2005, 06:38 PM
#5
Guest
Posts: n/a
Re: No Spark
Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
think. It's on the bell housing. Where's the camshaft sensor?
No codes.
Thanks!
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:gRu5f.11727$MN6.7839@fed1read04...
> Are you getting any diagnostic codes? Is the camshaft position sensor
> working ok?
>
> Fred Garvin wrote:
>> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>> replaced the Crank Shaft position sensor and ignition coil stip - still
>> no spark?
>>
>> Anybody have a suggestion of where to go next?
>>
>> Many thanks!
>>
>> Fred
>>
>>
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
think. It's on the bell housing. Where's the camshaft sensor?
No codes.
Thanks!
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:gRu5f.11727$MN6.7839@fed1read04...
> Are you getting any diagnostic codes? Is the camshaft position sensor
> working ok?
>
> Fred Garvin wrote:
>> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>> replaced the Crank Shaft position sensor and ignition coil stip - still
>> no spark?
>>
>> Anybody have a suggestion of where to go next?
>>
>> Many thanks!
>>
>> Fred
>>
>>
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
10-19-2005, 06:38 PM
#6
Guest
Posts: n/a
Re: No Spark
Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
think. It's on the bell housing. Where's the camshaft sensor?
No codes.
Thanks!
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:gRu5f.11727$MN6.7839@fed1read04...
> Are you getting any diagnostic codes? Is the camshaft position sensor
> working ok?
>
> Fred Garvin wrote:
>> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>> replaced the Crank Shaft position sensor and ignition coil stip - still
>> no spark?
>>
>> Anybody have a suggestion of where to go next?
>>
>> Many thanks!
>>
>> Fred
>>
>>
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
think. It's on the bell housing. Where's the camshaft sensor?
No codes.
Thanks!
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:gRu5f.11727$MN6.7839@fed1read04...
> Are you getting any diagnostic codes? Is the camshaft position sensor
> working ok?
>
> Fred Garvin wrote:
>> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>> replaced the Crank Shaft position sensor and ignition coil stip - still
>> no spark?
>>
>> Anybody have a suggestion of where to go next?
>>
>> Many thanks!
>>
>> Fred
>>
>>
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
10-19-2005, 06:38 PM
#7
Guest
Posts: n/a
Re: No Spark
Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
think. It's on the bell housing. Where's the camshaft sensor?
No codes.
Thanks!
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:gRu5f.11727$MN6.7839@fed1read04...
> Are you getting any diagnostic codes? Is the camshaft position sensor
> working ok?
>
> Fred Garvin wrote:
>> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>> replaced the Crank Shaft position sensor and ignition coil stip - still
>> no spark?
>>
>> Anybody have a suggestion of where to go next?
>>
>> Many thanks!
>>
>> Fred
>>
>>
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
think. It's on the bell housing. Where's the camshaft sensor?
No codes.
Thanks!
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:gRu5f.11727$MN6.7839@fed1read04...
> Are you getting any diagnostic codes? Is the camshaft position sensor
> working ok?
>
> Fred Garvin wrote:
>> My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>> replaced the Crank Shaft position sensor and ignition coil stip - still
>> no spark?
>>
>> Anybody have a suggestion of where to go next?
>>
>> Many thanks!
>>
>> Fred
>>
>>
>>
>
> --
> Jerry Bransford
> PP-ASEL N6TAY
> See the Geezer Jeep at
> http://members.***.net/jerrypb/
10-19-2005, 06:40 PM
#8
Guest
Posts: n/a
Re: No Spark
It's on the passenger-side where the distributor used to be. The
distributor is gone on late model TJ 4.0L engines but the camshaft
sensor should still be there being driven off the old distributor shaft
IIRC.
Jerry
Fred Garvin wrote:
> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
> think. It's on the bell housing. Where's the camshaft sensor?
>
> No codes.
>
> Thanks!
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:gRu5f.11727$MN6.7839@fed1read04...
>
>>Are you getting any diagnostic codes? Is the camshaft position sensor
>>working ok?
>>
>>Fred Garvin wrote:
>>
>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>>>replaced the Crank Shaft position sensor and ignition coil stip - still
>>>no spark?
>>>
>>>Anybody have a suggestion of where to go next?
>>>
>>>Many thanks!
>>>
>>>Fred
>>>
>>>
>>>
>>
>>--
>>Jerry Bransford
>>PP-ASEL N6TAY
>>See the Geezer Jeep at
>>http://members.***.net/jerrypb/
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
distributor is gone on late model TJ 4.0L engines but the camshaft
sensor should still be there being driven off the old distributor shaft
IIRC.
Jerry
Fred Garvin wrote:
> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
> think. It's on the bell housing. Where's the camshaft sensor?
>
> No codes.
>
> Thanks!
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:gRu5f.11727$MN6.7839@fed1read04...
>
>>Are you getting any diagnostic codes? Is the camshaft position sensor
>>working ok?
>>
>>Fred Garvin wrote:
>>
>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>>>replaced the Crank Shaft position sensor and ignition coil stip - still
>>>no spark?
>>>
>>>Anybody have a suggestion of where to go next?
>>>
>>>Many thanks!
>>>
>>>Fred
>>>
>>>
>>>
>>
>>--
>>Jerry Bransford
>>PP-ASEL N6TAY
>>See the Geezer Jeep at
>>http://members.***.net/jerrypb/
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
10-19-2005, 06:40 PM
#9
Guest
Posts: n/a
Re: No Spark
It's on the passenger-side where the distributor used to be. The
distributor is gone on late model TJ 4.0L engines but the camshaft
sensor should still be there being driven off the old distributor shaft
IIRC.
Jerry
Fred Garvin wrote:
> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
> think. It's on the bell housing. Where's the camshaft sensor?
>
> No codes.
>
> Thanks!
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:gRu5f.11727$MN6.7839@fed1read04...
>
>>Are you getting any diagnostic codes? Is the camshaft position sensor
>>working ok?
>>
>>Fred Garvin wrote:
>>
>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>>>replaced the Crank Shaft position sensor and ignition coil stip - still
>>>no spark?
>>>
>>>Anybody have a suggestion of where to go next?
>>>
>>>Many thanks!
>>>
>>>Fred
>>>
>>>
>>>
>>
>>--
>>Jerry Bransford
>>PP-ASEL N6TAY
>>See the Geezer Jeep at
>>http://members.***.net/jerrypb/
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
distributor is gone on late model TJ 4.0L engines but the camshaft
sensor should still be there being driven off the old distributor shaft
IIRC.
Jerry
Fred Garvin wrote:
> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
> think. It's on the bell housing. Where's the camshaft sensor?
>
> No codes.
>
> Thanks!
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:gRu5f.11727$MN6.7839@fed1read04...
>
>>Are you getting any diagnostic codes? Is the camshaft position sensor
>>working ok?
>>
>>Fred Garvin wrote:
>>
>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>>>replaced the Crank Shaft position sensor and ignition coil stip - still
>>>no spark?
>>>
>>>Anybody have a suggestion of where to go next?
>>>
>>>Many thanks!
>>>
>>>Fred
>>>
>>>
>>>
>>
>>--
>>Jerry Bransford
>>PP-ASEL N6TAY
>>See the Geezer Jeep at
>>http://members.***.net/jerrypb/
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
10-19-2005, 06:40 PM
#10
Guest
Posts: n/a
Re: No Spark
It's on the passenger-side where the distributor used to be. The
distributor is gone on late model TJ 4.0L engines but the camshaft
sensor should still be there being driven off the old distributor shaft
IIRC.
Jerry
Fred Garvin wrote:
> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
> think. It's on the bell housing. Where's the camshaft sensor?
>
> No codes.
>
> Thanks!
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:gRu5f.11727$MN6.7839@fed1read04...
>
>>Are you getting any diagnostic codes? Is the camshaft position sensor
>>working ok?
>>
>>Fred Garvin wrote:
>>
>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>>>replaced the Crank Shaft position sensor and ignition coil stip - still
>>>no spark?
>>>
>>>Anybody have a suggestion of where to go next?
>>>
>>>Many thanks!
>>>
>>>Fred
>>>
>>>
>>>
>>
>>--
>>Jerry Bransford
>>PP-ASEL N6TAY
>>See the Geezer Jeep at
>>http://members.***.net/jerrypb/
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
distributor is gone on late model TJ 4.0L engines but the camshaft
sensor should still be there being driven off the old distributor shaft
IIRC.
Jerry
Fred Garvin wrote:
> Hmmm. I didn't try the camshart sensor, just the Crank shaft sensor, I
> think. It's on the bell housing. Where's the camshaft sensor?
>
> No codes.
>
> Thanks!
> "Jerry Bransford" <jerrypb@***.net> wrote in message
> news:gRu5f.11727$MN6.7839@fed1read04...
>
>>Are you getting any diagnostic codes? Is the camshaft position sensor
>>working ok?
>>
>>Fred Garvin wrote:
>>
>>>My 2002 TJ 4L will suddenly not start. It's not getting any spark. I
>>>replaced the Crank Shaft position sensor and ignition coil stip - still
>>>no spark?
>>>
>>>Anybody have a suggestion of where to go next?
>>>
>>>Many thanks!
>>>
>>>Fred
>>>
>>>
>>>
>>
>>--
>>Jerry Bransford
>>PP-ASEL N6TAY
>>See the Geezer Jeep at
>>http://members.***.net/jerrypb/
>
>
>
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/