no ported vacuum off carb...
#31
Guest
Posts: n/a
Re: no ported vacuum off carb...
Kevin, the bottom base plate has a top and bottom. The notches need to
be at the top and the gasket needs to have these notches cut out so you
get your manifold vacuum at the base nipples.
Did you mess with the mix screws or the timing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kevin wrote:
>
> Bennet,
> I recently rebuilt my carb and am having some similar issues with my
> exact same Jeep. I'm using much of your info to troubleshoot some of
> my identical problems. I was wondering though what state you live in?
> I was hoping you could post the information on the emissions label
> under the hood. I live in California and my Jeep was wrecked years ago
> so I don't have that emissions label and Jeep will not sell me a new
> one. Even if you're from another state I am interested about the specs
> on that label. Otherwise I am removing the carb again to closely study
> the gaskets and try to determine if one of them is blocking a port
> somewhere. I've tried most everything else, and I had none of these
> issues before rebuilding the carb.
> Good luck and please post that label info if possible.
> Best,
> Kevin
be at the top and the gasket needs to have these notches cut out so you
get your manifold vacuum at the base nipples.
Did you mess with the mix screws or the timing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kevin wrote:
>
> Bennet,
> I recently rebuilt my carb and am having some similar issues with my
> exact same Jeep. I'm using much of your info to troubleshoot some of
> my identical problems. I was wondering though what state you live in?
> I was hoping you could post the information on the emissions label
> under the hood. I live in California and my Jeep was wrecked years ago
> so I don't have that emissions label and Jeep will not sell me a new
> one. Even if you're from another state I am interested about the specs
> on that label. Otherwise I am removing the carb again to closely study
> the gaskets and try to determine if one of them is blocking a port
> somewhere. I've tried most everything else, and I had none of these
> issues before rebuilding the carb.
> Good luck and please post that label info if possible.
> Best,
> Kevin
#32
Guest
Posts: n/a
Re: no ported vacuum off carb...
Kevin, the bottom base plate has a top and bottom. The notches need to
be at the top and the gasket needs to have these notches cut out so you
get your manifold vacuum at the base nipples.
Did you mess with the mix screws or the timing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kevin wrote:
>
> Bennet,
> I recently rebuilt my carb and am having some similar issues with my
> exact same Jeep. I'm using much of your info to troubleshoot some of
> my identical problems. I was wondering though what state you live in?
> I was hoping you could post the information on the emissions label
> under the hood. I live in California and my Jeep was wrecked years ago
> so I don't have that emissions label and Jeep will not sell me a new
> one. Even if you're from another state I am interested about the specs
> on that label. Otherwise I am removing the carb again to closely study
> the gaskets and try to determine if one of them is blocking a port
> somewhere. I've tried most everything else, and I had none of these
> issues before rebuilding the carb.
> Good luck and please post that label info if possible.
> Best,
> Kevin
be at the top and the gasket needs to have these notches cut out so you
get your manifold vacuum at the base nipples.
Did you mess with the mix screws or the timing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kevin wrote:
>
> Bennet,
> I recently rebuilt my carb and am having some similar issues with my
> exact same Jeep. I'm using much of your info to troubleshoot some of
> my identical problems. I was wondering though what state you live in?
> I was hoping you could post the information on the emissions label
> under the hood. I live in California and my Jeep was wrecked years ago
> so I don't have that emissions label and Jeep will not sell me a new
> one. Even if you're from another state I am interested about the specs
> on that label. Otherwise I am removing the carb again to closely study
> the gaskets and try to determine if one of them is blocking a port
> somewhere. I've tried most everything else, and I had none of these
> issues before rebuilding the carb.
> Good luck and please post that label info if possible.
> Best,
> Kevin
#33
Guest
Posts: n/a
Re: no ported vacuum off carb...
Kevin, the bottom base plate has a top and bottom. The notches need to
be at the top and the gasket needs to have these notches cut out so you
get your manifold vacuum at the base nipples.
Did you mess with the mix screws or the timing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kevin wrote:
>
> Bennet,
> I recently rebuilt my carb and am having some similar issues with my
> exact same Jeep. I'm using much of your info to troubleshoot some of
> my identical problems. I was wondering though what state you live in?
> I was hoping you could post the information on the emissions label
> under the hood. I live in California and my Jeep was wrecked years ago
> so I don't have that emissions label and Jeep will not sell me a new
> one. Even if you're from another state I am interested about the specs
> on that label. Otherwise I am removing the carb again to closely study
> the gaskets and try to determine if one of them is blocking a port
> somewhere. I've tried most everything else, and I had none of these
> issues before rebuilding the carb.
> Good luck and please post that label info if possible.
> Best,
> Kevin
be at the top and the gasket needs to have these notches cut out so you
get your manifold vacuum at the base nipples.
Did you mess with the mix screws or the timing?
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Kevin wrote:
>
> Bennet,
> I recently rebuilt my carb and am having some similar issues with my
> exact same Jeep. I'm using much of your info to troubleshoot some of
> my identical problems. I was wondering though what state you live in?
> I was hoping you could post the information on the emissions label
> under the hood. I live in California and my Jeep was wrecked years ago
> so I don't have that emissions label and Jeep will not sell me a new
> one. Even if you're from another state I am interested about the specs
> on that label. Otherwise I am removing the carb again to closely study
> the gaskets and try to determine if one of them is blocking a port
> somewhere. I've tried most everything else, and I had none of these
> issues before rebuilding the carb.
> Good luck and please post that label info if possible.
> Best,
> Kevin
#34
Guest
Posts: n/a
Re: no ported vacuum off carb...
kevin - sorry to hear it brother, i am - rather reluctantly - in
Minnesota. however, there is a rumor that my beast started out in
California so i *might* have a legible emmissions sticker i could copy
down for you... i'll go and look and get back to you in a couple of
hours.
HOWEVER, i am pretty sure mike romain lives in California and has set
up his nutterized CJ 258/BBD so that it passes emissions. not sure
about this tho as i now live in a state that doesnt require *any*
emissions testing at all - good for me, bad for the environment i
guess. those California smog regs drove me crazy all the years i lived
in SF - it DID help reduce the air pollution tho so i guess it was a
good thing. i'm kind of a treehugger anyway.
but a poor one. ;)
cheers, bennett
ps tell me exactly what kind of problems you're having - i gather that
you also have no ported vacuum? anything else?
Minnesota. however, there is a rumor that my beast started out in
California so i *might* have a legible emmissions sticker i could copy
down for you... i'll go and look and get back to you in a couple of
hours.
HOWEVER, i am pretty sure mike romain lives in California and has set
up his nutterized CJ 258/BBD so that it passes emissions. not sure
about this tho as i now live in a state that doesnt require *any*
emissions testing at all - good for me, bad for the environment i
guess. those California smog regs drove me crazy all the years i lived
in SF - it DID help reduce the air pollution tho so i guess it was a
good thing. i'm kind of a treehugger anyway.
but a poor one. ;)
cheers, bennett
ps tell me exactly what kind of problems you're having - i gather that
you also have no ported vacuum? anything else?
#35
Guest
Posts: n/a
Re: no ported vacuum off carb...
kevin - sorry to hear it brother, i am - rather reluctantly - in
Minnesota. however, there is a rumor that my beast started out in
California so i *might* have a legible emmissions sticker i could copy
down for you... i'll go and look and get back to you in a couple of
hours.
HOWEVER, i am pretty sure mike romain lives in California and has set
up his nutterized CJ 258/BBD so that it passes emissions. not sure
about this tho as i now live in a state that doesnt require *any*
emissions testing at all - good for me, bad for the environment i
guess. those California smog regs drove me crazy all the years i lived
in SF - it DID help reduce the air pollution tho so i guess it was a
good thing. i'm kind of a treehugger anyway.
but a poor one. ;)
cheers, bennett
ps tell me exactly what kind of problems you're having - i gather that
you also have no ported vacuum? anything else?
Minnesota. however, there is a rumor that my beast started out in
California so i *might* have a legible emmissions sticker i could copy
down for you... i'll go and look and get back to you in a couple of
hours.
HOWEVER, i am pretty sure mike romain lives in California and has set
up his nutterized CJ 258/BBD so that it passes emissions. not sure
about this tho as i now live in a state that doesnt require *any*
emissions testing at all - good for me, bad for the environment i
guess. those California smog regs drove me crazy all the years i lived
in SF - it DID help reduce the air pollution tho so i guess it was a
good thing. i'm kind of a treehugger anyway.
but a poor one. ;)
cheers, bennett
ps tell me exactly what kind of problems you're having - i gather that
you also have no ported vacuum? anything else?
#36
Guest
Posts: n/a
Re: no ported vacuum off carb...
kevin - sorry to hear it brother, i am - rather reluctantly - in
Minnesota. however, there is a rumor that my beast started out in
California so i *might* have a legible emmissions sticker i could copy
down for you... i'll go and look and get back to you in a couple of
hours.
HOWEVER, i am pretty sure mike romain lives in California and has set
up his nutterized CJ 258/BBD so that it passes emissions. not sure
about this tho as i now live in a state that doesnt require *any*
emissions testing at all - good for me, bad for the environment i
guess. those California smog regs drove me crazy all the years i lived
in SF - it DID help reduce the air pollution tho so i guess it was a
good thing. i'm kind of a treehugger anyway.
but a poor one. ;)
cheers, bennett
ps tell me exactly what kind of problems you're having - i gather that
you also have no ported vacuum? anything else?
Minnesota. however, there is a rumor that my beast started out in
California so i *might* have a legible emmissions sticker i could copy
down for you... i'll go and look and get back to you in a couple of
hours.
HOWEVER, i am pretty sure mike romain lives in California and has set
up his nutterized CJ 258/BBD so that it passes emissions. not sure
about this tho as i now live in a state that doesnt require *any*
emissions testing at all - good for me, bad for the environment i
guess. those California smog regs drove me crazy all the years i lived
in SF - it DID help reduce the air pollution tho so i guess it was a
good thing. i'm kind of a treehugger anyway.
but a poor one. ;)
cheers, bennett
ps tell me exactly what kind of problems you're having - i gather that
you also have no ported vacuum? anything else?
#37
Guest
Posts: n/a
Re: no ported vacuum off carb...
kevin - sorry to hear it brother, i am - rather reluctantly - in
Minnesota. however, there is a rumor that my beast started out in
California so i *might* have a legible emmissions sticker i could copy
down for you... i'll go and look and get back to you in a couple of
hours.
HOWEVER, i am pretty sure mike romain lives in California and has set
up his nutterized CJ 258/BBD so that it passes emissions. not sure
about this tho as i now live in a state that doesnt require *any*
emissions testing at all - good for me, bad for the environment i
guess. those California smog regs drove me crazy all the years i lived
in SF - it DID help reduce the air pollution tho so i guess it was a
good thing. i'm kind of a treehugger anyway.
but a poor one. ;)
cheers, bennett
ps tell me exactly what kind of problems you're having - i gather that
you also have no ported vacuum? anything else?
Minnesota. however, there is a rumor that my beast started out in
California so i *might* have a legible emmissions sticker i could copy
down for you... i'll go and look and get back to you in a couple of
hours.
HOWEVER, i am pretty sure mike romain lives in California and has set
up his nutterized CJ 258/BBD so that it passes emissions. not sure
about this tho as i now live in a state that doesnt require *any*
emissions testing at all - good for me, bad for the environment i
guess. those California smog regs drove me crazy all the years i lived
in SF - it DID help reduce the air pollution tho so i guess it was a
good thing. i'm kind of a treehugger anyway.
but a poor one. ;)
cheers, bennett
ps tell me exactly what kind of problems you're having - i gather that
you also have no ported vacuum? anything else?
#38
Guest
Posts: n/a
Re: no ported vacuum off carb...
Mike lives in Canada. ;-)
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1155415410.309217.222920@i42g2000cwa.googlegr oups.com...
> kevin - sorry to hear it brother, i am - rather reluctantly - in
> Minnesota. however, there is a rumor that my beast started out in
> California so i *might* have a legible emmissions sticker i could copy
> down for you... i'll go and look and get back to you in a couple of
> hours.
> HOWEVER, i am pretty sure mike romain lives in California and has set
> up his nutterized CJ 258/BBD so that it passes emissions. not sure
> about this tho as i now live in a state that doesnt require *any*
> emissions testing at all - good for me, bad for the environment i
> guess. those California smog regs drove me crazy all the years i lived
> in SF - it DID help reduce the air pollution tho so i guess it was a
> good thing. i'm kind of a treehugger anyway.
> but a poor one. ;)
> cheers, bennett
>
> ps tell me exactly what kind of problems you're having - i gather that
> you also have no ported vacuum? anything else?
>
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1155415410.309217.222920@i42g2000cwa.googlegr oups.com...
> kevin - sorry to hear it brother, i am - rather reluctantly - in
> Minnesota. however, there is a rumor that my beast started out in
> California so i *might* have a legible emmissions sticker i could copy
> down for you... i'll go and look and get back to you in a couple of
> hours.
> HOWEVER, i am pretty sure mike romain lives in California and has set
> up his nutterized CJ 258/BBD so that it passes emissions. not sure
> about this tho as i now live in a state that doesnt require *any*
> emissions testing at all - good for me, bad for the environment i
> guess. those California smog regs drove me crazy all the years i lived
> in SF - it DID help reduce the air pollution tho so i guess it was a
> good thing. i'm kind of a treehugger anyway.
> but a poor one. ;)
> cheers, bennett
>
> ps tell me exactly what kind of problems you're having - i gather that
> you also have no ported vacuum? anything else?
>
#39
Guest
Posts: n/a
Re: no ported vacuum off carb...
Mike lives in Canada. ;-)
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1155415410.309217.222920@i42g2000cwa.googlegr oups.com...
> kevin - sorry to hear it brother, i am - rather reluctantly - in
> Minnesota. however, there is a rumor that my beast started out in
> California so i *might* have a legible emmissions sticker i could copy
> down for you... i'll go and look and get back to you in a couple of
> hours.
> HOWEVER, i am pretty sure mike romain lives in California and has set
> up his nutterized CJ 258/BBD so that it passes emissions. not sure
> about this tho as i now live in a state that doesnt require *any*
> emissions testing at all - good for me, bad for the environment i
> guess. those California smog regs drove me crazy all the years i lived
> in SF - it DID help reduce the air pollution tho so i guess it was a
> good thing. i'm kind of a treehugger anyway.
> but a poor one. ;)
> cheers, bennett
>
> ps tell me exactly what kind of problems you're having - i gather that
> you also have no ported vacuum? anything else?
>
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1155415410.309217.222920@i42g2000cwa.googlegr oups.com...
> kevin - sorry to hear it brother, i am - rather reluctantly - in
> Minnesota. however, there is a rumor that my beast started out in
> California so i *might* have a legible emmissions sticker i could copy
> down for you... i'll go and look and get back to you in a couple of
> hours.
> HOWEVER, i am pretty sure mike romain lives in California and has set
> up his nutterized CJ 258/BBD so that it passes emissions. not sure
> about this tho as i now live in a state that doesnt require *any*
> emissions testing at all - good for me, bad for the environment i
> guess. those California smog regs drove me crazy all the years i lived
> in SF - it DID help reduce the air pollution tho so i guess it was a
> good thing. i'm kind of a treehugger anyway.
> but a poor one. ;)
> cheers, bennett
>
> ps tell me exactly what kind of problems you're having - i gather that
> you also have no ported vacuum? anything else?
>
#40
Guest
Posts: n/a
Re: no ported vacuum off carb...
Mike lives in Canada. ;-)
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1155415410.309217.222920@i42g2000cwa.googlegr oups.com...
> kevin - sorry to hear it brother, i am - rather reluctantly - in
> Minnesota. however, there is a rumor that my beast started out in
> California so i *might* have a legible emmissions sticker i could copy
> down for you... i'll go and look and get back to you in a couple of
> hours.
> HOWEVER, i am pretty sure mike romain lives in California and has set
> up his nutterized CJ 258/BBD so that it passes emissions. not sure
> about this tho as i now live in a state that doesnt require *any*
> emissions testing at all - good for me, bad for the environment i
> guess. those California smog regs drove me crazy all the years i lived
> in SF - it DID help reduce the air pollution tho so i guess it was a
> good thing. i'm kind of a treehugger anyway.
> but a poor one. ;)
> cheers, bennett
>
> ps tell me exactly what kind of problems you're having - i gather that
> you also have no ported vacuum? anything else?
>
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message
news:1155415410.309217.222920@i42g2000cwa.googlegr oups.com...
> kevin - sorry to hear it brother, i am - rather reluctantly - in
> Minnesota. however, there is a rumor that my beast started out in
> California so i *might* have a legible emmissions sticker i could copy
> down for you... i'll go and look and get back to you in a couple of
> hours.
> HOWEVER, i am pretty sure mike romain lives in California and has set
> up his nutterized CJ 258/BBD so that it passes emissions. not sure
> about this tho as i now live in a state that doesnt require *any*
> emissions testing at all - good for me, bad for the environment i
> guess. those California smog regs drove me crazy all the years i lived
> in SF - it DID help reduce the air pollution tho so i guess it was a
> good thing. i'm kind of a treehugger anyway.
> but a poor one. ;)
> cheers, bennett
>
> ps tell me exactly what kind of problems you're having - i gather that
> you also have no ported vacuum? anything else?
>