Newbie question on installing a lift myself
Guest
Posts: n/a
Newbie question on installing a lift myself
Hi All,
I had a question come to mind that hadn't dawned on me till just the other
day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7. I
planned to do the lift myself (with help from friends) but it ocurred to me
that once done, I'll have 4 spring pack doing me no good. In general, what
do you guys do with the old suspensions once you upgrade? They are stock
and probably not in sellable condition. (I wouldnt wish them on anyone
else). I dont have a need or desire to keep them once the new one is in.
Any input would be greatly appreciated.
Thanks for reading!
Tim
'83 CJ7
Mopar Injection
(soon to be 33x12.50's)
I had a question come to mind that hadn't dawned on me till just the other
day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7. I
planned to do the lift myself (with help from friends) but it ocurred to me
that once done, I'll have 4 spring pack doing me no good. In general, what
do you guys do with the old suspensions once you upgrade? They are stock
and probably not in sellable condition. (I wouldnt wish them on anyone
else). I dont have a need or desire to keep them once the new one is in.
Any input would be greatly appreciated.
Thanks for reading!
Tim
'83 CJ7
Mopar Injection
(soon to be 33x12.50's)
Guest
Posts: n/a
Re: Newbie question on installing a lift myself
If you live close so shipping was free, I would take them off your hands to
replace my bent stock spring. There is some value I guess if you wanted to
sell them. I gave some springs to my brother who was tinkering with his
homemade blacksmith equipment, he cut then in half and turned them into a
nice hunting knife. However one spring will last him a long time at the
rate he is going, you canmake a lot of knives out of one spring.
"Glaser" <rascalking10@hotmail.com> wrote in message
news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
> Hi All,
> I had a question come to mind that hadn't dawned on me till just the other
> day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7. I
> planned to do the lift myself (with help from friends) but it ocurred to
> me that once done, I'll have 4 spring pack doing me no good. In general,
> what do you guys do with the old suspensions once you upgrade? They are
> stock and probably not in sellable condition. (I wouldnt wish them on
> anyone else). I dont have a need or desire to keep them once the new one
> is in.
> Any input would be greatly appreciated.
> Thanks for reading!
>
> Tim
> '83 CJ7
> Mopar Injection
> (soon to be 33x12.50's)
>
replace my bent stock spring. There is some value I guess if you wanted to
sell them. I gave some springs to my brother who was tinkering with his
homemade blacksmith equipment, he cut then in half and turned them into a
nice hunting knife. However one spring will last him a long time at the
rate he is going, you canmake a lot of knives out of one spring.
"Glaser" <rascalking10@hotmail.com> wrote in message
news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
> Hi All,
> I had a question come to mind that hadn't dawned on me till just the other
> day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7. I
> planned to do the lift myself (with help from friends) but it ocurred to
> me that once done, I'll have 4 spring pack doing me no good. In general,
> what do you guys do with the old suspensions once you upgrade? They are
> stock and probably not in sellable condition. (I wouldnt wish them on
> anyone else). I dont have a need or desire to keep them once the new one
> is in.
> Any input would be greatly appreciated.
> Thanks for reading!
>
> Tim
> '83 CJ7
> Mopar Injection
> (soon to be 33x12.50's)
>
Guest
Posts: n/a
Re: Newbie question on installing a lift myself
If you live close so shipping was free, I would take them off your hands to
replace my bent stock spring. There is some value I guess if you wanted to
sell them. I gave some springs to my brother who was tinkering with his
homemade blacksmith equipment, he cut then in half and turned them into a
nice hunting knife. However one spring will last him a long time at the
rate he is going, you canmake a lot of knives out of one spring.
"Glaser" <rascalking10@hotmail.com> wrote in message
news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
> Hi All,
> I had a question come to mind that hadn't dawned on me till just the other
> day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7. I
> planned to do the lift myself (with help from friends) but it ocurred to
> me that once done, I'll have 4 spring pack doing me no good. In general,
> what do you guys do with the old suspensions once you upgrade? They are
> stock and probably not in sellable condition. (I wouldnt wish them on
> anyone else). I dont have a need or desire to keep them once the new one
> is in.
> Any input would be greatly appreciated.
> Thanks for reading!
>
> Tim
> '83 CJ7
> Mopar Injection
> (soon to be 33x12.50's)
>
replace my bent stock spring. There is some value I guess if you wanted to
sell them. I gave some springs to my brother who was tinkering with his
homemade blacksmith equipment, he cut then in half and turned them into a
nice hunting knife. However one spring will last him a long time at the
rate he is going, you canmake a lot of knives out of one spring.
"Glaser" <rascalking10@hotmail.com> wrote in message
news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
> Hi All,
> I had a question come to mind that hadn't dawned on me till just the other
> day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7. I
> planned to do the lift myself (with help from friends) but it ocurred to
> me that once done, I'll have 4 spring pack doing me no good. In general,
> what do you guys do with the old suspensions once you upgrade? They are
> stock and probably not in sellable condition. (I wouldnt wish them on
> anyone else). I dont have a need or desire to keep them once the new one
> is in.
> Any input would be greatly appreciated.
> Thanks for reading!
>
> Tim
> '83 CJ7
> Mopar Injection
> (soon to be 33x12.50's)
>
Guest
Posts: n/a
Re: Newbie question on installing a lift myself
If you live close so shipping was free, I would take them off your hands to
replace my bent stock spring. There is some value I guess if you wanted to
sell them. I gave some springs to my brother who was tinkering with his
homemade blacksmith equipment, he cut then in half and turned them into a
nice hunting knife. However one spring will last him a long time at the
rate he is going, you canmake a lot of knives out of one spring.
"Glaser" <rascalking10@hotmail.com> wrote in message
news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
> Hi All,
> I had a question come to mind that hadn't dawned on me till just the other
> day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7. I
> planned to do the lift myself (with help from friends) but it ocurred to
> me that once done, I'll have 4 spring pack doing me no good. In general,
> what do you guys do with the old suspensions once you upgrade? They are
> stock and probably not in sellable condition. (I wouldnt wish them on
> anyone else). I dont have a need or desire to keep them once the new one
> is in.
> Any input would be greatly appreciated.
> Thanks for reading!
>
> Tim
> '83 CJ7
> Mopar Injection
> (soon to be 33x12.50's)
>
replace my bent stock spring. There is some value I guess if you wanted to
sell them. I gave some springs to my brother who was tinkering with his
homemade blacksmith equipment, he cut then in half and turned them into a
nice hunting knife. However one spring will last him a long time at the
rate he is going, you canmake a lot of knives out of one spring.
"Glaser" <rascalking10@hotmail.com> wrote in message
news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
> Hi All,
> I had a question come to mind that hadn't dawned on me till just the other
> day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7. I
> planned to do the lift myself (with help from friends) but it ocurred to
> me that once done, I'll have 4 spring pack doing me no good. In general,
> what do you guys do with the old suspensions once you upgrade? They are
> stock and probably not in sellable condition. (I wouldnt wish them on
> anyone else). I dont have a need or desire to keep them once the new one
> is in.
> Any input would be greatly appreciated.
> Thanks for reading!
>
> Tim
> '83 CJ7
> Mopar Injection
> (soon to be 33x12.50's)
>
Guest
Posts: n/a
Re: Newbie question on installing a lift myself
I used a pair from my set to make an offroad trailer. Work fine last a long
time.
--
Rich Harris :1986 CJ7, Detroits F/R, 4:10's, 33"BFGMT's, Mopar F/I, 4.0L
head, Rubicon Express 2.5" Wrangler springs, Procomp MX6 Shocks, and a bunch
more fun stuff. To Reply; shave my hair.
"Rusted" <no@email.com> wrote in message
news:CGOlf.40965$on5.9579@fe17.usenetserver.com...
> If you live close so shipping was free, I would take them off your hands
> to replace my bent stock spring. There is some value I guess if you
> wanted to sell them. I gave some springs to my brother who was tinkering
> with his homemade blacksmith equipment, he cut then in half and turned
> them into a nice hunting knife. However one spring will last him a long
> time at the rate he is going, you canmake a lot of knives out of one
> spring.
>
>
>
> "Glaser" <rascalking10@hotmail.com> wrote in message
> news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
>> Hi All,
>> I had a question come to mind that hadn't dawned on me till just the
>> other day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7.
>> I planned to do the lift myself (with help from friends) but it ocurred
>> to me that once done, I'll have 4 spring pack doing me no good. In
>> general, what do you guys do with the old suspensions once you upgrade?
>> They are stock and probably not in sellable condition. (I wouldnt wish
>> them on anyone else). I dont have a need or desire to keep them once the
>> new one is in.
>> Any input would be greatly appreciated.
>> Thanks for reading!
>>
>> Tim
>> '83 CJ7
>> Mopar Injection
>> (soon to be 33x12.50's)
>>
>
>
>
time.
--
Rich Harris :1986 CJ7, Detroits F/R, 4:10's, 33"BFGMT's, Mopar F/I, 4.0L
head, Rubicon Express 2.5" Wrangler springs, Procomp MX6 Shocks, and a bunch
more fun stuff. To Reply; shave my hair.
"Rusted" <no@email.com> wrote in message
news:CGOlf.40965$on5.9579@fe17.usenetserver.com...
> If you live close so shipping was free, I would take them off your hands
> to replace my bent stock spring. There is some value I guess if you
> wanted to sell them. I gave some springs to my brother who was tinkering
> with his homemade blacksmith equipment, he cut then in half and turned
> them into a nice hunting knife. However one spring will last him a long
> time at the rate he is going, you canmake a lot of knives out of one
> spring.
>
>
>
> "Glaser" <rascalking10@hotmail.com> wrote in message
> news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
>> Hi All,
>> I had a question come to mind that hadn't dawned on me till just the
>> other day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7.
>> I planned to do the lift myself (with help from friends) but it ocurred
>> to me that once done, I'll have 4 spring pack doing me no good. In
>> general, what do you guys do with the old suspensions once you upgrade?
>> They are stock and probably not in sellable condition. (I wouldnt wish
>> them on anyone else). I dont have a need or desire to keep them once the
>> new one is in.
>> Any input would be greatly appreciated.
>> Thanks for reading!
>>
>> Tim
>> '83 CJ7
>> Mopar Injection
>> (soon to be 33x12.50's)
>>
>
>
>
Guest
Posts: n/a
Re: Newbie question on installing a lift myself
I used a pair from my set to make an offroad trailer. Work fine last a long
time.
--
Rich Harris :1986 CJ7, Detroits F/R, 4:10's, 33"BFGMT's, Mopar F/I, 4.0L
head, Rubicon Express 2.5" Wrangler springs, Procomp MX6 Shocks, and a bunch
more fun stuff. To Reply; shave my hair.
"Rusted" <no@email.com> wrote in message
news:CGOlf.40965$on5.9579@fe17.usenetserver.com...
> If you live close so shipping was free, I would take them off your hands
> to replace my bent stock spring. There is some value I guess if you
> wanted to sell them. I gave some springs to my brother who was tinkering
> with his homemade blacksmith equipment, he cut then in half and turned
> them into a nice hunting knife. However one spring will last him a long
> time at the rate he is going, you canmake a lot of knives out of one
> spring.
>
>
>
> "Glaser" <rascalking10@hotmail.com> wrote in message
> news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
>> Hi All,
>> I had a question come to mind that hadn't dawned on me till just the
>> other day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7.
>> I planned to do the lift myself (with help from friends) but it ocurred
>> to me that once done, I'll have 4 spring pack doing me no good. In
>> general, what do you guys do with the old suspensions once you upgrade?
>> They are stock and probably not in sellable condition. (I wouldnt wish
>> them on anyone else). I dont have a need or desire to keep them once the
>> new one is in.
>> Any input would be greatly appreciated.
>> Thanks for reading!
>>
>> Tim
>> '83 CJ7
>> Mopar Injection
>> (soon to be 33x12.50's)
>>
>
>
>
time.
--
Rich Harris :1986 CJ7, Detroits F/R, 4:10's, 33"BFGMT's, Mopar F/I, 4.0L
head, Rubicon Express 2.5" Wrangler springs, Procomp MX6 Shocks, and a bunch
more fun stuff. To Reply; shave my hair.
"Rusted" <no@email.com> wrote in message
news:CGOlf.40965$on5.9579@fe17.usenetserver.com...
> If you live close so shipping was free, I would take them off your hands
> to replace my bent stock spring. There is some value I guess if you
> wanted to sell them. I gave some springs to my brother who was tinkering
> with his homemade blacksmith equipment, he cut then in half and turned
> them into a nice hunting knife. However one spring will last him a long
> time at the rate he is going, you canmake a lot of knives out of one
> spring.
>
>
>
> "Glaser" <rascalking10@hotmail.com> wrote in message
> news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
>> Hi All,
>> I had a question come to mind that hadn't dawned on me till just the
>> other day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7.
>> I planned to do the lift myself (with help from friends) but it ocurred
>> to me that once done, I'll have 4 spring pack doing me no good. In
>> general, what do you guys do with the old suspensions once you upgrade?
>> They are stock and probably not in sellable condition. (I wouldnt wish
>> them on anyone else). I dont have a need or desire to keep them once the
>> new one is in.
>> Any input would be greatly appreciated.
>> Thanks for reading!
>>
>> Tim
>> '83 CJ7
>> Mopar Injection
>> (soon to be 33x12.50's)
>>
>
>
>
Guest
Posts: n/a
Re: Newbie question on installing a lift myself
I used a pair from my set to make an offroad trailer. Work fine last a long
time.
--
Rich Harris :1986 CJ7, Detroits F/R, 4:10's, 33"BFGMT's, Mopar F/I, 4.0L
head, Rubicon Express 2.5" Wrangler springs, Procomp MX6 Shocks, and a bunch
more fun stuff. To Reply; shave my hair.
"Rusted" <no@email.com> wrote in message
news:CGOlf.40965$on5.9579@fe17.usenetserver.com...
> If you live close so shipping was free, I would take them off your hands
> to replace my bent stock spring. There is some value I guess if you
> wanted to sell them. I gave some springs to my brother who was tinkering
> with his homemade blacksmith equipment, he cut then in half and turned
> them into a nice hunting knife. However one spring will last him a long
> time at the rate he is going, you canmake a lot of knives out of one
> spring.
>
>
>
> "Glaser" <rascalking10@hotmail.com> wrote in message
> news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
>> Hi All,
>> I had a question come to mind that hadn't dawned on me till just the
>> other day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7.
>> I planned to do the lift myself (with help from friends) but it ocurred
>> to me that once done, I'll have 4 spring pack doing me no good. In
>> general, what do you guys do with the old suspensions once you upgrade?
>> They are stock and probably not in sellable condition. (I wouldnt wish
>> them on anyone else). I dont have a need or desire to keep them once the
>> new one is in.
>> Any input would be greatly appreciated.
>> Thanks for reading!
>>
>> Tim
>> '83 CJ7
>> Mopar Injection
>> (soon to be 33x12.50's)
>>
>
>
>
time.
--
Rich Harris :1986 CJ7, Detroits F/R, 4:10's, 33"BFGMT's, Mopar F/I, 4.0L
head, Rubicon Express 2.5" Wrangler springs, Procomp MX6 Shocks, and a bunch
more fun stuff. To Reply; shave my hair.
"Rusted" <no@email.com> wrote in message
news:CGOlf.40965$on5.9579@fe17.usenetserver.com...
> If you live close so shipping was free, I would take them off your hands
> to replace my bent stock spring. There is some value I guess if you
> wanted to sell them. I gave some springs to my brother who was tinkering
> with his homemade blacksmith equipment, he cut then in half and turned
> them into a nice hunting knife. However one spring will last him a long
> time at the rate he is going, you canmake a lot of knives out of one
> spring.
>
>
>
> "Glaser" <rascalking10@hotmail.com> wrote in message
> news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
>> Hi All,
>> I had a question come to mind that hadn't dawned on me till just the
>> other day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7.
>> I planned to do the lift myself (with help from friends) but it ocurred
>> to me that once done, I'll have 4 spring pack doing me no good. In
>> general, what do you guys do with the old suspensions once you upgrade?
>> They are stock and probably not in sellable condition. (I wouldnt wish
>> them on anyone else). I dont have a need or desire to keep them once the
>> new one is in.
>> Any input would be greatly appreciated.
>> Thanks for reading!
>>
>> Tim
>> '83 CJ7
>> Mopar Injection
>> (soon to be 33x12.50's)
>>
>
>
>
Guest
Posts: n/a
Re: Newbie question on installing a lift myself
Interestings ideas. I'll probably consider the trailer idea. thats
something that i've needed for a while.. I may try a local only sale in DFW
area so I wont mess with shipping but maybe someone is around here that has
a use for them when I ever get this thing done..
Thanks for some suggestions.
Tim
"Rich" <harrisfam1988@verizon.net> wrote in message
news:5Spmf.54$tR6.46@trndny09...
>I used a pair from my set to make an offroad trailer. Work fine last a long
>time.
>
> --
> Rich Harris :1986 CJ7, Detroits F/R, 4:10's, 33"BFGMT's, Mopar F/I, 4.0L
> head, Rubicon Express 2.5" Wrangler springs, Procomp MX6 Shocks, and a
> bunch more fun stuff. To Reply; shave my hair.
> "Rusted" <no@email.com> wrote in message
> news:CGOlf.40965$on5.9579@fe17.usenetserver.com...
>> If you live close so shipping was free, I would take them off your hands
>> to replace my bent stock spring. There is some value I guess if you
>> wanted to sell them. I gave some springs to my brother who was
>> tinkering with his homemade blacksmith equipment, he cut then in half and
>> turned them into a nice hunting knife. However one spring will last him
>> a long time at the rate he is going, you canmake a lot of knives out of
>> one spring.
>>
>>
>>
>> "Glaser" <rascalking10@hotmail.com> wrote in message
>> news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
>>> Hi All,
>>> I had a question come to mind that hadn't dawned on me till just the
>>> other day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7.
>>> I planned to do the lift myself (with help from friends) but it ocurred
>>> to me that once done, I'll have 4 spring pack doing me no good. In
>>> general, what do you guys do with the old suspensions once you upgrade?
>>> They are stock and probably not in sellable condition. (I wouldnt wish
>>> them on anyone else). I dont have a need or desire to keep them once
>>> the new one is in.
>>> Any input would be greatly appreciated.
>>> Thanks for reading!
>>>
>>> Tim
>>> '83 CJ7
>>> Mopar Injection
>>> (soon to be 33x12.50's)
>>>
>>
>>
>>
>
>
something that i've needed for a while.. I may try a local only sale in DFW
area so I wont mess with shipping but maybe someone is around here that has
a use for them when I ever get this thing done..
Thanks for some suggestions.
Tim
"Rich" <harrisfam1988@verizon.net> wrote in message
news:5Spmf.54$tR6.46@trndny09...
>I used a pair from my set to make an offroad trailer. Work fine last a long
>time.
>
> --
> Rich Harris :1986 CJ7, Detroits F/R, 4:10's, 33"BFGMT's, Mopar F/I, 4.0L
> head, Rubicon Express 2.5" Wrangler springs, Procomp MX6 Shocks, and a
> bunch more fun stuff. To Reply; shave my hair.
> "Rusted" <no@email.com> wrote in message
> news:CGOlf.40965$on5.9579@fe17.usenetserver.com...
>> If you live close so shipping was free, I would take them off your hands
>> to replace my bent stock spring. There is some value I guess if you
>> wanted to sell them. I gave some springs to my brother who was
>> tinkering with his homemade blacksmith equipment, he cut then in half and
>> turned them into a nice hunting knife. However one spring will last him
>> a long time at the rate he is going, you canmake a lot of knives out of
>> one spring.
>>
>>
>>
>> "Glaser" <rascalking10@hotmail.com> wrote in message
>> news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
>>> Hi All,
>>> I had a question come to mind that hadn't dawned on me till just the
>>> other day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7.
>>> I planned to do the lift myself (with help from friends) but it ocurred
>>> to me that once done, I'll have 4 spring pack doing me no good. In
>>> general, what do you guys do with the old suspensions once you upgrade?
>>> They are stock and probably not in sellable condition. (I wouldnt wish
>>> them on anyone else). I dont have a need or desire to keep them once
>>> the new one is in.
>>> Any input would be greatly appreciated.
>>> Thanks for reading!
>>>
>>> Tim
>>> '83 CJ7
>>> Mopar Injection
>>> (soon to be 33x12.50's)
>>>
>>
>>
>>
>
>
Guest
Posts: n/a
Re: Newbie question on installing a lift myself
Interestings ideas. I'll probably consider the trailer idea. thats
something that i've needed for a while.. I may try a local only sale in DFW
area so I wont mess with shipping but maybe someone is around here that has
a use for them when I ever get this thing done..
Thanks for some suggestions.
Tim
"Rich" <harrisfam1988@verizon.net> wrote in message
news:5Spmf.54$tR6.46@trndny09...
>I used a pair from my set to make an offroad trailer. Work fine last a long
>time.
>
> --
> Rich Harris :1986 CJ7, Detroits F/R, 4:10's, 33"BFGMT's, Mopar F/I, 4.0L
> head, Rubicon Express 2.5" Wrangler springs, Procomp MX6 Shocks, and a
> bunch more fun stuff. To Reply; shave my hair.
> "Rusted" <no@email.com> wrote in message
> news:CGOlf.40965$on5.9579@fe17.usenetserver.com...
>> If you live close so shipping was free, I would take them off your hands
>> to replace my bent stock spring. There is some value I guess if you
>> wanted to sell them. I gave some springs to my brother who was
>> tinkering with his homemade blacksmith equipment, he cut then in half and
>> turned them into a nice hunting knife. However one spring will last him
>> a long time at the rate he is going, you canmake a lot of knives out of
>> one spring.
>>
>>
>>
>> "Glaser" <rascalking10@hotmail.com> wrote in message
>> news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
>>> Hi All,
>>> I had a question come to mind that hadn't dawned on me till just the
>>> other day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7.
>>> I planned to do the lift myself (with help from friends) but it ocurred
>>> to me that once done, I'll have 4 spring pack doing me no good. In
>>> general, what do you guys do with the old suspensions once you upgrade?
>>> They are stock and probably not in sellable condition. (I wouldnt wish
>>> them on anyone else). I dont have a need or desire to keep them once
>>> the new one is in.
>>> Any input would be greatly appreciated.
>>> Thanks for reading!
>>>
>>> Tim
>>> '83 CJ7
>>> Mopar Injection
>>> (soon to be 33x12.50's)
>>>
>>
>>
>>
>
>
something that i've needed for a while.. I may try a local only sale in DFW
area so I wont mess with shipping but maybe someone is around here that has
a use for them when I ever get this thing done..
Thanks for some suggestions.
Tim
"Rich" <harrisfam1988@verizon.net> wrote in message
news:5Spmf.54$tR6.46@trndny09...
>I used a pair from my set to make an offroad trailer. Work fine last a long
>time.
>
> --
> Rich Harris :1986 CJ7, Detroits F/R, 4:10's, 33"BFGMT's, Mopar F/I, 4.0L
> head, Rubicon Express 2.5" Wrangler springs, Procomp MX6 Shocks, and a
> bunch more fun stuff. To Reply; shave my hair.
> "Rusted" <no@email.com> wrote in message
> news:CGOlf.40965$on5.9579@fe17.usenetserver.com...
>> If you live close so shipping was free, I would take them off your hands
>> to replace my bent stock spring. There is some value I guess if you
>> wanted to sell them. I gave some springs to my brother who was
>> tinkering with his homemade blacksmith equipment, he cut then in half and
>> turned them into a nice hunting knife. However one spring will last him
>> a long time at the rate he is going, you canmake a lot of knives out of
>> one spring.
>>
>>
>>
>> "Glaser" <rascalking10@hotmail.com> wrote in message
>> news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
>>> Hi All,
>>> I had a question come to mind that hadn't dawned on me till just the
>>> other day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7.
>>> I planned to do the lift myself (with help from friends) but it ocurred
>>> to me that once done, I'll have 4 spring pack doing me no good. In
>>> general, what do you guys do with the old suspensions once you upgrade?
>>> They are stock and probably not in sellable condition. (I wouldnt wish
>>> them on anyone else). I dont have a need or desire to keep them once
>>> the new one is in.
>>> Any input would be greatly appreciated.
>>> Thanks for reading!
>>>
>>> Tim
>>> '83 CJ7
>>> Mopar Injection
>>> (soon to be 33x12.50's)
>>>
>>
>>
>>
>
>
Guest
Posts: n/a
Re: Newbie question on installing a lift myself
Interestings ideas. I'll probably consider the trailer idea. thats
something that i've needed for a while.. I may try a local only sale in DFW
area so I wont mess with shipping but maybe someone is around here that has
a use for them when I ever get this thing done..
Thanks for some suggestions.
Tim
"Rich" <harrisfam1988@verizon.net> wrote in message
news:5Spmf.54$tR6.46@trndny09...
>I used a pair from my set to make an offroad trailer. Work fine last a long
>time.
>
> --
> Rich Harris :1986 CJ7, Detroits F/R, 4:10's, 33"BFGMT's, Mopar F/I, 4.0L
> head, Rubicon Express 2.5" Wrangler springs, Procomp MX6 Shocks, and a
> bunch more fun stuff. To Reply; shave my hair.
> "Rusted" <no@email.com> wrote in message
> news:CGOlf.40965$on5.9579@fe17.usenetserver.com...
>> If you live close so shipping was free, I would take them off your hands
>> to replace my bent stock spring. There is some value I guess if you
>> wanted to sell them. I gave some springs to my brother who was
>> tinkering with his homemade blacksmith equipment, he cut then in half and
>> turned them into a nice hunting knife. However one spring will last him
>> a long time at the rate he is going, you canmake a lot of knives out of
>> one spring.
>>
>>
>>
>> "Glaser" <rascalking10@hotmail.com> wrote in message
>> news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
>>> Hi All,
>>> I had a question come to mind that hadn't dawned on me till just the
>>> other day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7.
>>> I planned to do the lift myself (with help from friends) but it ocurred
>>> to me that once done, I'll have 4 spring pack doing me no good. In
>>> general, what do you guys do with the old suspensions once you upgrade?
>>> They are stock and probably not in sellable condition. (I wouldnt wish
>>> them on anyone else). I dont have a need or desire to keep them once
>>> the new one is in.
>>> Any input would be greatly appreciated.
>>> Thanks for reading!
>>>
>>> Tim
>>> '83 CJ7
>>> Mopar Injection
>>> (soon to be 33x12.50's)
>>>
>>
>>
>>
>
>
something that i've needed for a while.. I may try a local only sale in DFW
area so I wont mess with shipping but maybe someone is around here that has
a use for them when I ever get this thing done..
Thanks for some suggestions.
Tim
"Rich" <harrisfam1988@verizon.net> wrote in message
news:5Spmf.54$tR6.46@trndny09...
>I used a pair from my set to make an offroad trailer. Work fine last a long
>time.
>
> --
> Rich Harris :1986 CJ7, Detroits F/R, 4:10's, 33"BFGMT's, Mopar F/I, 4.0L
> head, Rubicon Express 2.5" Wrangler springs, Procomp MX6 Shocks, and a
> bunch more fun stuff. To Reply; shave my hair.
> "Rusted" <no@email.com> wrote in message
> news:CGOlf.40965$on5.9579@fe17.usenetserver.com...
>> If you live close so shipping was free, I would take them off your hands
>> to replace my bent stock spring. There is some value I guess if you
>> wanted to sell them. I gave some springs to my brother who was
>> tinkering with his homemade blacksmith equipment, he cut then in half and
>> turned them into a nice hunting knife. However one spring will last him
>> a long time at the rate he is going, you canmake a lot of knives out of
>> one spring.
>>
>>
>>
>> "Glaser" <rascalking10@hotmail.com> wrote in message
>> news:f-udnbmCXZ5UKQreRVn-jw@comcast.com...
>>> Hi All,
>>> I had a question come to mind that hadn't dawned on me till just the
>>> other day.. I'm planning to get a 2.5-3" suspension lift for my '83 CJ7.
>>> I planned to do the lift myself (with help from friends) but it ocurred
>>> to me that once done, I'll have 4 spring pack doing me no good. In
>>> general, what do you guys do with the old suspensions once you upgrade?
>>> They are stock and probably not in sellable condition. (I wouldnt wish
>>> them on anyone else). I dont have a need or desire to keep them once
>>> the new one is in.
>>> Any input would be greatly appreciated.
>>> Thanks for reading!
>>>
>>> Tim
>>> '83 CJ7
>>> Mopar Injection
>>> (soon to be 33x12.50's)
>>>
>>
>>
>>
>
>
Thread
Thread Starter
Forum
Replies
Last Post
asevereid
Introductions
6
Mar 12, 2014 10:03 PM
mdfranci@airmail.net
Jeep Mailing List
45
Jan 16, 2005 05:53 PM
MiplacedJeep
Jeep Mailing List
12
Jan 19, 2004 12:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
