new rear diff, possible?
Guest
Posts: n/a
Re: new rear diff, possible?
Will the Vari-lok fit the dana 44?
I believe the vari-lok was an option for my model jeep, so it seems logical
that they could replace my open diff with the vari-lok?
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:xOadnd0wUNCYIIbfRVn-hw@ez2.net...
> Yes, there is a limited slip that will fit your D44.
>
>
I believe the vari-lok was an option for my model jeep, so it seems logical
that they could replace my open diff with the vari-lok?
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:xOadnd0wUNCYIIbfRVn-hw@ez2.net...
> Yes, there is a limited slip that will fit your D44.
>
>
Guest
Posts: n/a
Re: new rear diff, possible?
Will the Vari-lok fit the dana 44?
I believe the vari-lok was an option for my model jeep, so it seems logical
that they could replace my open diff with the vari-lok?
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:xOadnd0wUNCYIIbfRVn-hw@ez2.net...
> Yes, there is a limited slip that will fit your D44.
>
>
I believe the vari-lok was an option for my model jeep, so it seems logical
that they could replace my open diff with the vari-lok?
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:xOadnd0wUNCYIIbfRVn-hw@ez2.net...
> Yes, there is a limited slip that will fit your D44.
>
>
Guest
Posts: n/a
Re: new rear diff, possible?
Will the Vari-lok fit the dana 44?
I believe the vari-lok was an option for my model jeep, so it seems logical
that they could replace my open diff with the vari-lok?
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:xOadnd0wUNCYIIbfRVn-hw@ez2.net...
> Yes, there is a limited slip that will fit your D44.
>
>
I believe the vari-lok was an option for my model jeep, so it seems logical
that they could replace my open diff with the vari-lok?
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:xOadnd0wUNCYIIbfRVn-hw@ez2.net...
> Yes, there is a limited slip that will fit your D44.
>
>
Guest
Posts: n/a
Re: new rear diff, possible?
Yes, your Dana 30 and Dana 44 axles are the same as those in the
Quadra-Drive models, minus the Vari-Loks of course. Should fit no problem.
http://www.wjjeeps.com/varilok.jpg
http://www.wjjeeps.com/tcases.htm
I'm guessing your dealer will want thousands just to do the rear.
Unless you confirm the warranty thing, you might be better of with
something like a TrueTrac:
http://www.4wdworld.com.au/products/detroit/detroit.htm
Steve
http://xjeep.dyndns.org
Grand Jeep wrote:
> Currently have stock 04 JGC with Quadra-Trac-II
> Rear end is a Dana44, traditional "open diff".
>
> Anyone know if I could install a limited-slip diff in it's place? (looking
> for the same system that comes with Quadra-Drive equipped jeeps, so I can
> keep what's left of my warranty)
> Can a the vari-lock limited slip diff directly replace my stock D44 open
> diff?
Quadra-Drive models, minus the Vari-Loks of course. Should fit no problem.
http://www.wjjeeps.com/varilok.jpg
http://www.wjjeeps.com/tcases.htm
I'm guessing your dealer will want thousands just to do the rear.
Unless you confirm the warranty thing, you might be better of with
something like a TrueTrac:
http://www.4wdworld.com.au/products/detroit/detroit.htm
Steve
http://xjeep.dyndns.org
Grand Jeep wrote:
> Currently have stock 04 JGC with Quadra-Trac-II
> Rear end is a Dana44, traditional "open diff".
>
> Anyone know if I could install a limited-slip diff in it's place? (looking
> for the same system that comes with Quadra-Drive equipped jeeps, so I can
> keep what's left of my warranty)
> Can a the vari-lock limited slip diff directly replace my stock D44 open
> diff?
Guest
Posts: n/a
Re: new rear diff, possible?
Yes, your Dana 30 and Dana 44 axles are the same as those in the
Quadra-Drive models, minus the Vari-Loks of course. Should fit no problem.
http://www.wjjeeps.com/varilok.jpg
http://www.wjjeeps.com/tcases.htm
I'm guessing your dealer will want thousands just to do the rear.
Unless you confirm the warranty thing, you might be better of with
something like a TrueTrac:
http://www.4wdworld.com.au/products/detroit/detroit.htm
Steve
http://xjeep.dyndns.org
Grand Jeep wrote:
> Currently have stock 04 JGC with Quadra-Trac-II
> Rear end is a Dana44, traditional "open diff".
>
> Anyone know if I could install a limited-slip diff in it's place? (looking
> for the same system that comes with Quadra-Drive equipped jeeps, so I can
> keep what's left of my warranty)
> Can a the vari-lock limited slip diff directly replace my stock D44 open
> diff?
Quadra-Drive models, minus the Vari-Loks of course. Should fit no problem.
http://www.wjjeeps.com/varilok.jpg
http://www.wjjeeps.com/tcases.htm
I'm guessing your dealer will want thousands just to do the rear.
Unless you confirm the warranty thing, you might be better of with
something like a TrueTrac:
http://www.4wdworld.com.au/products/detroit/detroit.htm
Steve
http://xjeep.dyndns.org
Grand Jeep wrote:
> Currently have stock 04 JGC with Quadra-Trac-II
> Rear end is a Dana44, traditional "open diff".
>
> Anyone know if I could install a limited-slip diff in it's place? (looking
> for the same system that comes with Quadra-Drive equipped jeeps, so I can
> keep what's left of my warranty)
> Can a the vari-lock limited slip diff directly replace my stock D44 open
> diff?
Guest
Posts: n/a
Re: new rear diff, possible?
Yes, your Dana 30 and Dana 44 axles are the same as those in the
Quadra-Drive models, minus the Vari-Loks of course. Should fit no problem.
http://www.wjjeeps.com/varilok.jpg
http://www.wjjeeps.com/tcases.htm
I'm guessing your dealer will want thousands just to do the rear.
Unless you confirm the warranty thing, you might be better of with
something like a TrueTrac:
http://www.4wdworld.com.au/products/detroit/detroit.htm
Steve
http://xjeep.dyndns.org
Grand Jeep wrote:
> Currently have stock 04 JGC with Quadra-Trac-II
> Rear end is a Dana44, traditional "open diff".
>
> Anyone know if I could install a limited-slip diff in it's place? (looking
> for the same system that comes with Quadra-Drive equipped jeeps, so I can
> keep what's left of my warranty)
> Can a the vari-lock limited slip diff directly replace my stock D44 open
> diff?
Quadra-Drive models, minus the Vari-Loks of course. Should fit no problem.
http://www.wjjeeps.com/varilok.jpg
http://www.wjjeeps.com/tcases.htm
I'm guessing your dealer will want thousands just to do the rear.
Unless you confirm the warranty thing, you might be better of with
something like a TrueTrac:
http://www.4wdworld.com.au/products/detroit/detroit.htm
Steve
http://xjeep.dyndns.org
Grand Jeep wrote:
> Currently have stock 04 JGC with Quadra-Trac-II
> Rear end is a Dana44, traditional "open diff".
>
> Anyone know if I could install a limited-slip diff in it's place? (looking
> for the same system that comes with Quadra-Drive equipped jeeps, so I can
> keep what's left of my warranty)
> Can a the vari-lock limited slip diff directly replace my stock D44 open
> diff?
Guest
Posts: n/a
Re: new rear diff, possible?
Um, that Grand Cherokee's aluminum housing Dana 44 is different from the
cast iron housing Dana 44 used in a TJ and I seriously doubt the Varilok
or much else inside the axle will fit.
Steve wrote:
> Yes, your Dana 30 and Dana 44 axles are the same as those in the
> Quadra-Drive models, minus the Vari-Loks of course. Should fit no problem.
>
> http://www.wjjeeps.com/varilok.jpg
> http://www.wjjeeps.com/tcases.htm
>
> I'm guessing your dealer will want thousands just to do the rear.
>
> Unless you confirm the warranty thing, you might be better of with
> something like a TrueTrac:
>
> http://www.4wdworld.com.au/products/detroit/detroit.htm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Grand Jeep wrote:
>
>> Currently have stock 04 JGC with Quadra-Trac-II
>> Rear end is a Dana44, traditional "open diff".
>>
>> Anyone know if I could install a limited-slip diff in it's place?
>> (looking
>> for the same system that comes with Quadra-Drive equipped jeeps, so I can
>> keep what's left of my warranty)
>> Can a the vari-lock limited slip diff directly replace my stock D44 open
>> diff?
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
cast iron housing Dana 44 used in a TJ and I seriously doubt the Varilok
or much else inside the axle will fit.
Steve wrote:
> Yes, your Dana 30 and Dana 44 axles are the same as those in the
> Quadra-Drive models, minus the Vari-Loks of course. Should fit no problem.
>
> http://www.wjjeeps.com/varilok.jpg
> http://www.wjjeeps.com/tcases.htm
>
> I'm guessing your dealer will want thousands just to do the rear.
>
> Unless you confirm the warranty thing, you might be better of with
> something like a TrueTrac:
>
> http://www.4wdworld.com.au/products/detroit/detroit.htm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Grand Jeep wrote:
>
>> Currently have stock 04 JGC with Quadra-Trac-II
>> Rear end is a Dana44, traditional "open diff".
>>
>> Anyone know if I could install a limited-slip diff in it's place?
>> (looking
>> for the same system that comes with Quadra-Drive equipped jeeps, so I can
>> keep what's left of my warranty)
>> Can a the vari-lock limited slip diff directly replace my stock D44 open
>> diff?
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: new rear diff, possible?
Um, that Grand Cherokee's aluminum housing Dana 44 is different from the
cast iron housing Dana 44 used in a TJ and I seriously doubt the Varilok
or much else inside the axle will fit.
Steve wrote:
> Yes, your Dana 30 and Dana 44 axles are the same as those in the
> Quadra-Drive models, minus the Vari-Loks of course. Should fit no problem.
>
> http://www.wjjeeps.com/varilok.jpg
> http://www.wjjeeps.com/tcases.htm
>
> I'm guessing your dealer will want thousands just to do the rear.
>
> Unless you confirm the warranty thing, you might be better of with
> something like a TrueTrac:
>
> http://www.4wdworld.com.au/products/detroit/detroit.htm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Grand Jeep wrote:
>
>> Currently have stock 04 JGC with Quadra-Trac-II
>> Rear end is a Dana44, traditional "open diff".
>>
>> Anyone know if I could install a limited-slip diff in it's place?
>> (looking
>> for the same system that comes with Quadra-Drive equipped jeeps, so I can
>> keep what's left of my warranty)
>> Can a the vari-lock limited slip diff directly replace my stock D44 open
>> diff?
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
cast iron housing Dana 44 used in a TJ and I seriously doubt the Varilok
or much else inside the axle will fit.
Steve wrote:
> Yes, your Dana 30 and Dana 44 axles are the same as those in the
> Quadra-Drive models, minus the Vari-Loks of course. Should fit no problem.
>
> http://www.wjjeeps.com/varilok.jpg
> http://www.wjjeeps.com/tcases.htm
>
> I'm guessing your dealer will want thousands just to do the rear.
>
> Unless you confirm the warranty thing, you might be better of with
> something like a TrueTrac:
>
> http://www.4wdworld.com.au/products/detroit/detroit.htm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Grand Jeep wrote:
>
>> Currently have stock 04 JGC with Quadra-Trac-II
>> Rear end is a Dana44, traditional "open diff".
>>
>> Anyone know if I could install a limited-slip diff in it's place?
>> (looking
>> for the same system that comes with Quadra-Drive equipped jeeps, so I can
>> keep what's left of my warranty)
>> Can a the vari-lock limited slip diff directly replace my stock D44 open
>> diff?
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: new rear diff, possible?
Um, that Grand Cherokee's aluminum housing Dana 44 is different from the
cast iron housing Dana 44 used in a TJ and I seriously doubt the Varilok
or much else inside the axle will fit.
Steve wrote:
> Yes, your Dana 30 and Dana 44 axles are the same as those in the
> Quadra-Drive models, minus the Vari-Loks of course. Should fit no problem.
>
> http://www.wjjeeps.com/varilok.jpg
> http://www.wjjeeps.com/tcases.htm
>
> I'm guessing your dealer will want thousands just to do the rear.
>
> Unless you confirm the warranty thing, you might be better of with
> something like a TrueTrac:
>
> http://www.4wdworld.com.au/products/detroit/detroit.htm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Grand Jeep wrote:
>
>> Currently have stock 04 JGC with Quadra-Trac-II
>> Rear end is a Dana44, traditional "open diff".
>>
>> Anyone know if I could install a limited-slip diff in it's place?
>> (looking
>> for the same system that comes with Quadra-Drive equipped jeeps, so I can
>> keep what's left of my warranty)
>> Can a the vari-lock limited slip diff directly replace my stock D44 open
>> diff?
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
cast iron housing Dana 44 used in a TJ and I seriously doubt the Varilok
or much else inside the axle will fit.
Steve wrote:
> Yes, your Dana 30 and Dana 44 axles are the same as those in the
> Quadra-Drive models, minus the Vari-Loks of course. Should fit no problem.
>
> http://www.wjjeeps.com/varilok.jpg
> http://www.wjjeeps.com/tcases.htm
>
> I'm guessing your dealer will want thousands just to do the rear.
>
> Unless you confirm the warranty thing, you might be better of with
> something like a TrueTrac:
>
> http://www.4wdworld.com.au/products/detroit/detroit.htm
>
> Steve
> http://xjeep.dyndns.org
>
>
> Grand Jeep wrote:
>
>> Currently have stock 04 JGC with Quadra-Trac-II
>> Rear end is a Dana44, traditional "open diff".
>>
>> Anyone know if I could install a limited-slip diff in it's place?
>> (looking
>> for the same system that comes with Quadra-Drive equipped jeeps, so I can
>> keep what's left of my warranty)
>> Can a the vari-lock limited slip diff directly replace my stock D44 open
>> diff?
--
Jerry Bransford
PP-ASEL N6TAY
See the Geezer Jeep at
http://members.***.net/jerrypb/
Guest
Posts: n/a
Re: new rear diff, possible?
I'm no metallurgist, but the housing sure looks like cast iron and not
aluminum. Of course, this is based solely on external appearance. :)
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:c63Td.19737$Tt.3901@fed1read05...
> Um, that Grand Cherokee's aluminum housing Dana 44 is different from the
> cast iron housing Dana 44 used in a TJ and I seriously doubt the Varilok
> or much else inside the axle will fit.
>
aluminum. Of course, this is based solely on external appearance. :)
"Jerry Bransford" <jerrypb@***.net> wrote in message
news:c63Td.19737$Tt.3901@fed1read05...
> Um, that Grand Cherokee's aluminum housing Dana 44 is different from the
> cast iron housing Dana 44 used in a TJ and I seriously doubt the Varilok
> or much else inside the axle will fit.
>