New Jeep Purchace HELP!!!!!!!!!
#1
Guest
Posts: n/a
New Jeep Purchace HELP!!!!!!!!!
I hvae recently purchased a 1983 CJ7 from a individual. He has done
many modifications and now I am having a hard time contacting him with
some questions. I am hoping someone out there in cyber space can help.
He (or someone) has replaced the stock engine with an engine from a
1979 Wagaoneer. It is a 360. The 360 is connected to a T-18 tranny and
a dana 200. Is this tranny and transfer case stock for the 360??? Also
I am having a hard time finding a TORQUE ARM for the T-18 any
suggestions? Any comments anyone could give will be appreciated. Thanks!
many modifications and now I am having a hard time contacting him with
some questions. I am hoping someone out there in cyber space can help.
He (or someone) has replaced the stock engine with an engine from a
1979 Wagaoneer. It is a 360. The 360 is connected to a T-18 tranny and
a dana 200. Is this tranny and transfer case stock for the 360??? Also
I am having a hard time finding a TORQUE ARM for the T-18 any
suggestions? Any comments anyone could give will be appreciated. Thanks!
#2
Guest
Posts: n/a
Re: New Jeep Purchace HELP!!!!!!!!!
A useful site:
http://www.off-road.com/jeep/swb/articles/specgrid.htm Sounds like a
great combination to me. The Dana 20 is tied it down, out to the side
like this Dana 18: http://www.----------.com/Dana18.jpg You could
probably make one out of a piece of angle iron, or peruse the bone
yards for an old Gladiator, or transmission mount for your year:
http://www.----------.com/cj7stablizerMount.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
rousch6 wrote:
>
> I hvae recently purchased a 1983 CJ7 from a individual. He has done
> many modifications and now I am having a hard time contacting him with
> some questions. I am hoping someone out there in cyber space can help.
> He (or someone) has replaced the stock engine with an engine from a
> 1979 Wagaoneer. It is a 360. The 360 is connected to a T-18 tranny and
> a dana 200. Is this tranny and transfer case stock for the 360??? Also
> I am having a hard time finding a TORQUE ARM for the T-18 any
> suggestions? Any comments anyone could give will be appreciated. Thanks!
http://www.off-road.com/jeep/swb/articles/specgrid.htm Sounds like a
great combination to me. The Dana 20 is tied it down, out to the side
like this Dana 18: http://www.----------.com/Dana18.jpg You could
probably make one out of a piece of angle iron, or peruse the bone
yards for an old Gladiator, or transmission mount for your year:
http://www.----------.com/cj7stablizerMount.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
rousch6 wrote:
>
> I hvae recently purchased a 1983 CJ7 from a individual. He has done
> many modifications and now I am having a hard time contacting him with
> some questions. I am hoping someone out there in cyber space can help.
> He (or someone) has replaced the stock engine with an engine from a
> 1979 Wagaoneer. It is a 360. The 360 is connected to a T-18 tranny and
> a dana 200. Is this tranny and transfer case stock for the 360??? Also
> I am having a hard time finding a TORQUE ARM for the T-18 any
> suggestions? Any comments anyone could give will be appreciated. Thanks!
#3
Guest
Posts: n/a
Re: New Jeep Purchace HELP!!!!!!!!!
A useful site:
http://www.off-road.com/jeep/swb/articles/specgrid.htm Sounds like a
great combination to me. The Dana 20 is tied it down, out to the side
like this Dana 18: http://www.----------.com/Dana18.jpg You could
probably make one out of a piece of angle iron, or peruse the bone
yards for an old Gladiator, or transmission mount for your year:
http://www.----------.com/cj7stablizerMount.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
rousch6 wrote:
>
> I hvae recently purchased a 1983 CJ7 from a individual. He has done
> many modifications and now I am having a hard time contacting him with
> some questions. I am hoping someone out there in cyber space can help.
> He (or someone) has replaced the stock engine with an engine from a
> 1979 Wagaoneer. It is a 360. The 360 is connected to a T-18 tranny and
> a dana 200. Is this tranny and transfer case stock for the 360??? Also
> I am having a hard time finding a TORQUE ARM for the T-18 any
> suggestions? Any comments anyone could give will be appreciated. Thanks!
http://www.off-road.com/jeep/swb/articles/specgrid.htm Sounds like a
great combination to me. The Dana 20 is tied it down, out to the side
like this Dana 18: http://www.----------.com/Dana18.jpg You could
probably make one out of a piece of angle iron, or peruse the bone
yards for an old Gladiator, or transmission mount for your year:
http://www.----------.com/cj7stablizerMount.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
rousch6 wrote:
>
> I hvae recently purchased a 1983 CJ7 from a individual. He has done
> many modifications and now I am having a hard time contacting him with
> some questions. I am hoping someone out there in cyber space can help.
> He (or someone) has replaced the stock engine with an engine from a
> 1979 Wagaoneer. It is a 360. The 360 is connected to a T-18 tranny and
> a dana 200. Is this tranny and transfer case stock for the 360??? Also
> I am having a hard time finding a TORQUE ARM for the T-18 any
> suggestions? Any comments anyone could give will be appreciated. Thanks!
#4
Guest
Posts: n/a
Re: New Jeep Purchace HELP!!!!!!!!!
A useful site:
http://www.off-road.com/jeep/swb/articles/specgrid.htm Sounds like a
great combination to me. The Dana 20 is tied it down, out to the side
like this Dana 18: http://www.----------.com/Dana18.jpg You could
probably make one out of a piece of angle iron, or peruse the bone
yards for an old Gladiator, or transmission mount for your year:
http://www.----------.com/cj7stablizerMount.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
rousch6 wrote:
>
> I hvae recently purchased a 1983 CJ7 from a individual. He has done
> many modifications and now I am having a hard time contacting him with
> some questions. I am hoping someone out there in cyber space can help.
> He (or someone) has replaced the stock engine with an engine from a
> 1979 Wagaoneer. It is a 360. The 360 is connected to a T-18 tranny and
> a dana 200. Is this tranny and transfer case stock for the 360??? Also
> I am having a hard time finding a TORQUE ARM for the T-18 any
> suggestions? Any comments anyone could give will be appreciated. Thanks!
http://www.off-road.com/jeep/swb/articles/specgrid.htm Sounds like a
great combination to me. The Dana 20 is tied it down, out to the side
like this Dana 18: http://www.----------.com/Dana18.jpg You could
probably make one out of a piece of angle iron, or peruse the bone
yards for an old Gladiator, or transmission mount for your year:
http://www.----------.com/cj7stablizerMount.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
rousch6 wrote:
>
> I hvae recently purchased a 1983 CJ7 from a individual. He has done
> many modifications and now I am having a hard time contacting him with
> some questions. I am hoping someone out there in cyber space can help.
> He (or someone) has replaced the stock engine with an engine from a
> 1979 Wagaoneer. It is a 360. The 360 is connected to a T-18 tranny and
> a dana 200. Is this tranny and transfer case stock for the 360??? Also
> I am having a hard time finding a TORQUE ARM for the T-18 any
> suggestions? Any comments anyone could give will be appreciated. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
Jessie The Jeep
Jeep TJ Forum
6
06-08-2009 12:12 PM
Gary B.
Jeep Mailing List
12
10-21-2003 01:08 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)